Are self-tapping screws good for plywood?

Self-tapping screws are good for use with metals, various types of plastics (plywood, fiberglass, polycarbonates), and cast or forged material, like iron, aluminum, brass or bronze. Self-tapping screws also work for surfaces where you can't secure the rear end with a nut.

bdnfasteners.com - What's the Difference Between Self-Drilling and Self-Tapping ...

Do I need to sand my shed before painting?

If you're painting an old shed, you'll need to sand it to remove old and flaky paint. Wrap some sandpaper around a block and start sanding in the...

Last updated Feb 25, 2018

What animals hide under sheds?

Wildlife that have been known to live under sheds, decks, and porches include: chipmunks. feral cats. opossums. otters. raccoons. rats (various...

Last updated Oct 20, 2022

Promotion

What’s the Difference Between Self-Drilling and Self-Tapping Screws?

Despite their widespread availability and usage in commercial, industrial, and construction applications, many still confuse self-tapping screws with self-drilling screws. Part of the reason this happens is that self-drilling screws are a subtype of self-tapping screws.

Let’s go through these two products separately to clarify these differences.

Self-Tapping Screws

Self-tapping screws have various names. They’re often called metal screws, sheet metal screws, tapping screws, or tapper screws. Their tips come in different shapes: pointed (like a pencil), blunt, or flat, and they are described as thread-forming, thread-cutting, or thread rolling. If the screw is pointed, it will be thread-cutting – tapping and creating threads in a pre-drilled hole. If the tip is flat, it is thread-rolling – rolling or extruding threads and creating zero clearance between screw and material. The most important difference between self-tapping and self-drilling screws is that self-tapping screws cannot go through metal without a pilot hole, which must be pre-drilled or pre-punched. Exact drill or punch hole size is also important. The screw will become loose and not thread properly and securely if the hole’s too big. If the hole’s too small, the screw can break or cause the material to split or crack. Self-tapping screws are good for use with metals, various types of plastics (plywood, fiberglass, polycarbonates), and cast or forged material, like iron, aluminum, brass or bronze. Self-tapping screws also work for surfaces where you can’t secure the rear end with a nut. Common applications include fastening aluminum sections, attaching metal brackets onto wood, or inserting screws into plastic housings.

Self-Drilling Screws

Self-drilling screws are easy to distinguish if you look at their point, which curves gently at the end and is shaped like a twist drill. They’re often called Tek Screws, after the brand name that popularized them. Screw lengths vary, but drill points are standardized, identifiable by number (1 to 5), which determines their length and thickness. Head and drive styles vary; self-drilling screws are most commonly Phillips, hex, or square. Unlike self-tapping screws, self-drilling screws need no pilot hole to cut and fasten; they can drill, tap, and fasten in one go, which saves you the extra step of drilling, then fastening. These screws can fasten metal to metal, wood to metal, and work well with light, low-density materials. In general, they have more specialized applications than self-tapping screws. They are good for metal building and light gauge metal assemblies; Point #5 is already capable of fastening half-inch steel sheets. Self-drilling screws are useful in HVAC applications, cladding, metal roofing, steel framing, and other general construction tasks.

Similarities and Differences

What’s most similar about these two types of screws is that both form threads as they penetrate the material being worked with. Both attach steel on steel and steel on wood when rivets or nuts and bolts cannot do the job. Between these two, however, self-drilling screws offer two distinct advantages: time and costs saved at assembly time, and reduced error in installation, which often happens if one pre-drills holes in the wrong size. Consult with self-drilling screw manufacturers you can trust – contact BDN Fasteners today.

How many square feet do you need for a woodworking shop?

The amount of space you will need for your woodshop is about 125 square ft (11.6 square meters). But, if you are doing most of your woodworking by...

Last updated Apr 9, 2020

What is slang for carpenter?

Chippie is also the slang term for a joiner or a carpenter or anyone who works with wood, again, connected with the word chipboard. Oct 12, 2019

Last updated Jun 13, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Should you use glue with pocket screws?

You can assemble pocket-hole joints without glue. We've always said that a joint made with Kreg Pocket-Hole Screws is so strong that glue is optional. That means you can use glue if you want, but it's not necessary in order to create a strong, lasting joint.

learn.kregtool.com - Answers to 3 common pocket-hole questions | Kreg Tool

Question 1: Can you disassemble and reassemble pocket-hole joints?

The ability to put a joint together more than once is one of the great things about pocket-hole joinery. You can assemble and reassemble a pocket-hole joint multiple times. That’s great for test-fitting assemblies, and for times when you want to disassemble a project to simplify finishing. The ability to disassemble and reassemble pocket-hole joints is also great when you want to build a project in your workspace, and then disassemble it to make it easier to move into its final location.

Here are a few tips to make it easier.

Do you need planning permission for a shepherds hut?

The simple answer is the shepherd's hut itself doesn't need planning permission, it's what you are doing with it that may do. Is a shepherd's hut...

Last updated Aug 2, 2022

Is it OK to run Romex in conduit?

No, you can not run your Romex wiring in conduits. What you're looking at in the code book is referring to THHN and other wiring, that while...

Last updated Aug 1, 2022

Promotion

How do you drive snakes away from your house?

Take as many steps to deprive snakes of cover in your home as possible. Cut the grass short, clear bushes around your house. ... Inspect your home,...

Last updated Nov 3, 2018

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

How much does it cost to build a tiny home?

Depending on what you want to spend and your building skills, the cost can range from under $50,000 to above $200,000. Tiny House Expo director...

Last updated Jul 16, 2021