DIY Builds
Photo by AlteredSnaps Pexels Logo Photo: AlteredSnaps

Can a shed be placed directly on the ground?

It might seem easier to place a shed directly on the ground, but that's a bad idea for two reasons. First, the build site should be a level surface so the shed is stable and the doors function properly. Secondly, any wood that has direct contact with the ground will absorb moisture and cause premature rot and decay.

How do I become a successful artisan?
How do I become a successful artisan?

Artisans have achieved high technical mastery or possess specific practical skills. They are specialists in their field; they are industrious and...

Read More »
What do I need to wire a shed?
What do I need to wire a shed?

Check your local codes, but the basic requirements are (1) adequate gauge wire and breaker, (2) GFCI protection on the circuit, and (3) special...

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

By Brennan Deitsch

Before your dream shed takes shape, a solid shed foundation is crucial to ensure longevity. Here are a few tips to make the process simple.

Why shed foundations are important

Before we get started, let us explain why building a foundation is important. It might seem easier to place a shed directly on the ground, but that’s a bad idea for two reasons. First, the build site should be a level surface so the shed is stable and the doors function properly. Secondly, any wood that has direct contact with the ground will absorb moisture and cause premature rot and decay. A shed should be raised slightly so there is proper water drainage and ventilation underneath. Building a shed foundation might seem like more work, but it’s well worth it.

Determine if you need a building permit for your shed

Before you choose a location to install your shed, consult your local Home Owners Association (HOA) or Building Department to see if you will need a permit and what guidelines there might be. Every county has different guidelines, so we strongly suggest to not skip this step. Confirm the following with your HOA/Building Department:

Shed type and size

Frost line

Location

Foundation Type

Required building permits

Do you need a foundation for your shed?

Typically, small sheds in the size range of 6×8 or smaller do not require a foundation. However, we suggest placing all sheds on a foundation for structure and ventilation purposes.

Where should you build your shed foundation?

Choose a spot that is within 6” level* and does not collect large amounts of water. Make sure there is 3’of clearance from other objects such as trees and other buildings.** For 10×16 sheds or larger, give yourself 4’ of clearance so there is adequate space to move. Heartland Sheds Foundation Requirements: *Prior to the arrival of the installer, your build site must be level within 6”. Additional charges may apply if this requirement is not met. We require 3ft. of clearance on all sides for installations and 4’ for buildings 160 square feet or larger.

Frost Line:

Frost line is known as the depth at which water in soil is expected to freeze. In areas with colder climates, structures may move due to seasonal freeze and thaw changes and that makes your frost line crucial. In general, frost lines get deeper the closer you get to the poles. Be sure to contact your HOA to determine the frost line for your area. Or view this frost line map to see the frost line for your state.

Tools needed:

What does it cost to build an outdoor office?
What does it cost to build an outdoor office?

How Much Will I Have to Pay? The Breakdown of Costs. As outlined above, buyers who want to build an outdoor office will pay $1,500 to $4,000 for...

Read More »
Do you need a concrete pad for a steel building?
Do you need a concrete pad for a steel building?

Depending on the size of your metal building, gravel, dirt, wood, or concrete are all viable options for a functional foundation. Ideally, your...

Read More »

Chalk Reels Concrete Leveling Blocks Tape Measure Hammer Level

Shed Foundation Types:

Sheds can be built on the following type of foundations:

Concrete floor

Concrete piers

Compacted gravel

Wood foundations

We are going to focus on wood and concrete foundations in this article as that is our preferred type.

Wood Shed Foundations

Wood shed foundations are typically built using solid concrete blocks measuring 16”W x 8”L x 2”H, pea gravel, 4×4 pressure-treated lumber and a wooden floor frame. Concrete leveling blocks can be purchased separately with any Heartland order. Begin by laying out your floor size and locating pea gravel and concrete blocks. Play each block 12” from each corner of the floor frame. Place the concrete blocks on pea gravel. Use the pea gravel to level your foundation. Blocks along the same floor joist should be a maximum of 72” apart. The spacing between blocks on different floor joists should be a maximum of 48” apart (See floor layout below). Once all blocks are located, place the 4×4’s onto the blocks and continue by building your floor frame and securing the frame to the 4×4’s. The 4×4’s allow proper ventilation underneath your shed. Once the floor frame is built, you can easily level your shed using more or less pea gravel at various locations. Estimated number of concrete blocks based on shed size (more will be required for any surface that is unlevel): Shed Size Number of Blocks Shed Size Number of Blocks 6X6 8 12x12 16 8X8 8 12x16 22 8X6 8 12x20 26 8X10 10 12x24 30 8X12 12 16x20 50 — *Piers or foundation may be required by state 10X10 14 16x24 55 — *Piers or foundation may be required by state 10X12 16 10x16 20

Click on image to see enlarged.

Concrete Shed Foundations

We also recommend our customers to use a concrete slab for their shed foundations. Heartland does not employ, endorse or in any way recommend any qualified concrete specialists for sheds. It is the responsibility of the homeowner to assure compliance to these specs.

Concrete Foundation Guidelines:

The build site must be level and should have natural drainage and no standing water. This will keep excess moisture away from the foundation and extend your sheds’ life. Your concrete slab should be minimally the same width and depth as the shed. We use MCA or ACQ treated plates around the entire perimeter of the walls. Customers can choose to leave the bottom plate attached behind the door or have it cut out. The slab can be no greater than 1/2” out of “square” and no more than a 1/4’’ out of “level.” Any variation to this will cause delays or even stop the installation process. 1/4” out of level at the floor can lead to more than 1” out of level at the roof depending on building size and roof style. Based on “local code requirements” wedge style anchor bolts should be set in the concrete around the entire perimeter (12” from corners and 4’ on center thereafter) of the slab (except where the door goes) projecting approx. 2 ½” above the slab grade and approx. 1-3/4” to 2” from the edge of the slab. Minimum anchor embedment should be 2-1/2”-3” into the concrete. We recommend ½ diameter x 8-1/2 long Simpson Wedge. Your finished concrete slab surface needs to be at a minimum of 4″ above grade. REMEMBER: You should ensure that your region allows this type of foundation as well as conformance to all applicable zoning and/or building codes.

Does mold grow behind insulation?
Does mold grow behind insulation?

Technically, mold does not typically grow on the insulation itself. Fiberglass is not a viable food source for mold. Yet mold growth is often found...

Read More »
Can I live in a metal shed?
Can I live in a metal shed?

Metal buildings are extremely versatile. People use them for everything from carports and garages to outdoor workshops or private offices. Some...

Read More »

Best Shed Foundations

These are our preferred types of shed foundations. See how they compare.

Purchasing a shed can be a big investment. However, preparing your foundation properly will help ensure your shed is ready to handle the elements 365 days a year. If you have any questions, feel free to give us a call at 800-234-6167.

How to Level a Shed

How our Built-on Site Shed Installation Process Works

How to Build a Storage Shed

How to Shingle a Shed

? ?

Other Links:

Shed Buyer’s Guide

FAQ’S

Is it OK to insulate roof rafters?
Is it OK to insulate roof rafters?

You can use rigid insulation boards, carefully cut to size, or you can have foam insulation sprayed between the rafters. Whichever approach you...

Read More »
How do you winterize a shed?
How do you winterize a shed?

Winter Is Coming: Tips To Winterize Your Shed Sweep Out the Debris. ... Apply Weather Stripping. ... Check the Bottom Seal on the Garage Door. ......

Read More »
Will a king-size mattress fit in a 5x10 storage unit?
Will a king-size mattress fit in a 5x10 storage unit?

A king-size bed set, including a box spring, can fit in a 5x10 storage unit. An average king-size bed takes up about 18 of the 50 square feet of...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Do you always own the fence on the left?
Do you always own the fence on the left?

First let's clear up the age old myth of; “Each home owner is responsible for maintaining the fence on the left-hand side, as you look at the...

Read More »