Can I put a shed directly on concrete?

Placing a shed directly onto hardcore or concrete slab bases effectively traps a pocket of air between the base of your shed and the ground. This air pocket can become quite moist and the moisture then condenses on the wooden base of the shed, posing a risk of rotting from the bottom up.

thegardenrange.co.uk - Why Not Put a Shed Directly on to Gravel or Slabs? - The Garden Range

Should you treat a new shed?

Most sheds come with a base coat of wood preservative already added. But you should always treat your new shed straight away, once it's installed,...

Last updated Jan 22, 2022

How do people get rich in 2022?

Becoming rich is an ambitious goal, and here are simple ways to get there. Invest in yourself. Investing in yourself is your first step on how to...

Last updated Aug 8, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

The switch to plastic means that now, products such as our plastic shed base tiles are much more accessible as they are much easier to handle, transport and install. This switch has saved people countless labour hours, huge sums of money and reduced both the amount of plastic going to landfill and in turn the amount of carbon dioxide produced as a by-product of the manufacturing process. “That’s all well and good but why would I use a plastic shed base instead of just putting the shed straight onto compacted hardcore?” Simply put, our plastic shed base panels have been designed and engineered to not only support the weight of your shed, but also to help prolong the life of any wooden structure placed on top. How does it do this? Let’s break it down into the benefits:

Plastic Shed Bases Don’t Absorb Water

It’s quite common knowledge that water is one of the most destructive forces that can come into contact with wood. Unfortunately for sheds, there’s plenty of the wet stuff knocking around in the UK! Our plastic shed bases are designed to be filled with gravel (but can be left unfilled while still achieving the same goal) which allows water to pass through the surface without absorbing any of it. As both the plastic shed base and the gravel-fill contained inside of it are not porous, they do not absorb any rainwater and simply allow the water to pass straight through the top, soaking into the floor below and dispersing away in the most natural way. This process actually helps to improve the quality of the water too as some of the pollutants in rainwater get captured by the gravel and soil below and naturally break down. Again, as the plastic is non-porous, the water will not be soaked upwards from the ground and brought into contact with the bottom of the shed. This helps to prevent the shed from rotting from the bottom up, unlike a shed placed directly on hardcore which will suffer from water being soaked up from the bottom of the shed as the wooden shed bearers are in direct contact with the ground. If a large amount of rain falls in a short period of time or the drainage of the soil is not particularly good, the rain can form puddles and these often gather around structures such as sheds. This puddling often gets absorbed by the shed bearers and poses a threat to the shed as more moisture soaks into the wood and over time causes rotting and the natural break down of the wooden fibres. As concrete slabs are not permeable (but are slightly porous) they will absorb an amount of water as well as doing nothing to combat puddling. So when the rain falls, concrete will not only trap water around the base of your shed, it’ll also continue to allow water to soak into the shed from within the slab itself.

How do you level up without digging?

There is an easy way to do this. Screw two 2-by-4 boards together alongside each other so they are one or two feet longer than the diameter of your...

Last updated Jun 4, 2021

How many tons of gravel do I need for 1000 square feet?

To cover 1000 square feet of landscaping projects, you will need approximately either 10 tons of 3/4″- 1″ size of screened gravel at 2 inches deep,...

Last updated Nov 2, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Settlement/Sinking is Prevented by a Plastic Shed Base

As the rain falls over the years, the ground goes through a continual wetting and drying process. If a shed is placed directly on grass or soil, this can mean that the ground becomes saturated and starts to be moulded or indented by any heavy items placed on it. This results in a sinking effect that doesn’t always occur evenly across the whole area of the shed, often with one corner or side slipping into the soft ground below. The shed then becomes uneven and puts intense strain on the construction of the beams and slats and can cause the shed to start to break up and puts it at risk of damage from wind. If placed on compacted hardcore, the problem is still present but will take longer as the sandier material washes out of the hardcore and into the soil surrounding it. This then causes unevenness and can only be rectified by lifting the shed and building the washed out areas back up to ensure its strength and stability. Plastic shed base panels interlock together to create one continuous surface, supported by a compacted hardcore base. So even if there’s localised wash-out of the sandier material in the hardcore (which can be vastly reduced by using a membrane in the build-up) the grid will help to bridge the gap while still offering strength. Of course, plastic does not become weathered or soggy in wet weather, giving you a solid base all year round. Placing a shed directly onto hardcore or concrete slab bases effectively traps a pocket of air between the base of your shed and the ground. This air pocket can become quite moist and the moisture then condenses on the wooden base of the shed, posing a risk of rotting from the bottom up. Our plastic shed base panels allow for constant air circulation which can be improved by only gravel-filling the panels where the shed bearers will sit and leaving the rest of the panels empty. This will aid the air circulation and will help to keep the base of the shed dry and will prevent rotting.

thegardenrange.co.uk - Why Not Put a Shed Directly on to Gravel or Slabs? - The Garden Range

How do you secure an outdoor shed?

How to Secure Your Shed, and Stop Break-ins Choose the Location Carefully. ... Anchor the Shed. ... Replace the Door Hinge. ... Improve the Lock....

Last updated Jul 26, 2020

Does a laundry room have to be on an outside wall?

The necessity of ventilation dictates placement of the dryer, because its vent works best when it spans a short distance with few (if any)...

Last updated Dec 23, 2019

Promotion

What is an overhang roof called?

What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the...

Last updated Jun 11, 2018

Promotion

How do you keep the bottom of a shed from rotting?

Your Shed Needs Sunlight to Keep the Floor from Rotting Place your shed in a place where it will be in direct sunlight from all angles with no...

Last updated Sep 25, 2022