Photo: Anete Lusina

Can I use a regular drill for concrete anchors?

thespruce.com - How to Drill Into Concrete - The Spruce

How deep should a trench be for electrical?

All Trenches must be a minimum of 36” deep. If a 36-inch depth cannot be achieved, contact Lane Electric's Engineering Department at 541-484-1151....

Last updated Mar 31, 2020

What are 3 disadvantages of a shed roof?

Drawbacks of a Shed Roof The need for boxed gutters. Because a shed roof has only one slope, gutters have to double time in handling water when it...

Last updated May 29, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

For projects around the home, it is sometimes necessary to drill into concrete. You might need to do this when installing shelves or hanging heavy mirrors on concrete block walls; installing metal anchors in concrete slabs when building wood-frame walls; installing toilet closet flanges on concrete slabs; or attaching footers for patios, pergolas, and other outdoor structures. You might also need to hammer a concrete nail into concrete or drill pilot holes for masonry screws. These can be daunting projects because concrete is notoriously difficult to drill. Many do-it-yourselfers may decide against the project or may develop elaborate workarounds. But, with the right tools and a few helpful techniques, you can drill into concrete successfully and with less effort than you may imagine.

The Basics of Drilling Into Concrete

Drilling into concrete is difficult because concrete is dense, is hard, and has embedded aggregate stones that can be obstacles to the drill bit. Drilling can quickly dull drill bits. When the bit encounters aggregate, the bit drags even more. The preferred tool for drilling into concrete is a hammer drill.

Drilling Concrete With a Hammer Drill

A hammer drill is different from an ordinary rotary drill. Like a rotary drill, the hammer drill rotates. Unlike a rotary drill, it hammers while it rotates. Hammering helps to pulverize the concrete, while the rotation forms the hole. If you anticipate drilling many holes in concrete, it may be beneficial to purchase a hammer drill. Hammer drills are available in both corded and cordless versions. Most hammer drills have two modes: simultaneous hammer/drill mode and drill-only mode.

Drilling Concrete With a Rotary Drill

It is possible to drill into concrete with an ordinary rotary drill. Rotary drills take longer to drill into concrete than hammer drills and more physical effort is required. Excessive heat build-up can break the drill bit. One way to speed up the process and avoid breaking the drill bit is to keep the bit cool. With cordless drills, you can run a slow, steady stream of water across the surface. With corded drills, holding a shop vacuum nozzle close to the drilling surface both cools the bit and keeps the hole free of debris. 2:24 Click Play to Learn How to Drill Into Concrete to Drive Nails

Safety Considerations

Always use safety gear when drilling into concrete: hearing protection, eye protection, a dust mask or respirator, heavy gloves, boots, and long sleeves.

Why is my metal shed roof wet inside?

Air inside a shed is slightly warmer than the air around it outside so any moisture in the foundations will rise until it touches the cool exterior...

Last updated Jan 31, 2022

Which fruit is the king?

Durian products Disliked by most Europeans and banned from the underground in Singapore, the durian is treasured by people all over Asia and...

Last updated Sep 10, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Can you use plastic wall anchors in concrete?

Remember that plastic anchor screws work well in concrete and even in cabinets, but they'll max out pretty quickly depending on screw size and the anchor itself. Common applications of plastic screw anchors include: Light-load situations where the force will typically be straight down.

allpointsfasteners.com - Plastic Screw Anchors - All Points Fasteners

Plastic anchors always require a pre-made or pre-drilled hole for the anchor. If you’re working on drywall, consider using an awl since you’ll get enough depth without all of the usual dust. Next, press the anchor into the hole and push until it’s flush with the surface. If you need, carefully tap it flush to the wall with a hammer. For best results, make the hole just a little smaller than the width of the anchor so it can get a good grip later. Now you’re ready to screw into the anchor, but always take care with this process. Remember that plastic anchor screws work well in concrete and even in cabinets, but they’ll max out pretty quickly depending on screw size and the anchor itself.

Common applications of plastic screw anchors include:

• Light-load situations where the force will typically be straight down. This can work with picture hanging hooks, and using two will give you the right look and extra protection. • Stabilizing other hangings or items that have a more secure primary anchor. • Some cabinetry. Because there’s typically minimal force, you can use plastic screw anchors for cabinet doors to get a flush, smart look that’s easy to install and remove, which can make future painting a bit easier. Knowing when and how to use plastic screw anchors can make your job a lot faster and easier, but pushing them too far can lead to poor service and callbacks shortly after your install. If you need a hand determining the right anchor for your work, contact us and All Points Fasteners’ experts will be happy to help.