Can I use decking as shed base?

Deck blocks make a very stable base, but can be difficult to level if the ground settles; especially once the shed is built. The more the ground is disturbed trying to level the deck blocks, the greater the chance they will settle out of level over time.

plasticinehouse.com - How to Build a Shed Foundation with Deck Blocks - Plasticine House

What was a bank barn used for?

Typically used for agriculture with stored hay or corn on the upper floor and stables on the ground floor, they were primarily built by wealthy...

Last updated Aug 30, 2020

How do you make a metal shed watertight?

To waterproof gaps at the seams of the shed floor, we can use a waterproof sealant. Apply this all of the way around the bottom of the shed to...

Last updated Jun 13, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Last Update: August 20, 2020

A foundation is the most important aspect of your project since the whole project rests on it (pun intended). There a few different types of foundations, some will be referenced and described. This article will hopefully help educate you and explain how to build a shed foundation with deck blocks.

What are Deck Blocks

Deck blocks are a preformed mass of concrete with formations in the top sized to hold lumber for vertical posts or beams to support a structure. They will look similar to below but may vary slightly in size or shape. They may be wider at the base than the top, or they may be square like this.

When Should They be Used?

Deck blocks are generally a more temporary simpler type of foundation for free standing or floating structures and used when below grade(the top of the soil) concrete piers aren’t needed, wanted or an option. The blocks are frequently used where mixing concrete is difficult to use or transport. The blocks are frequently used where mixing concrete is difficult to use or transport. Deck blocks are normally used for a freestanding structure low to the ground. They should not be used if you are attaching to a permanent structure that has frost protection equirements. They should not be used if you are attaching to a permanent structure that has frost protection equirements. They generally shouldn’t be used if you are in a high wind or high uplift situations. They generally shouldn’t be used if you are in a high wind or high uplift situations. They aren’t normally allowed for residential structures for habitation. They aren’t normally allowed for residential structures for habitation. Deck blocks are rarely an option if you need to comply with frost heave regulations. It’s best to check with your local building code office to see if they’re allowed for your type of structure. Some areas may additionally require the use of auger type tie downs that are like a metal screw that goes into the ground then fasten to structural framing members. There are other types of ground anchors like used for Mobile Homes etc. They will add lateral support and inhibit uplift in stormy or high wind situations.

How much are Deck Blocks and where do I get them?

They vary in price from $4 to $6 depending on location. They are found at most big box home stores or check your local hardware store.

How big are deck blocks?

The block size will vary according to the manufacturer, but they are generally 10″-11” square and 7″-8” high.

Weight – 48 lbs.

Will Deck Blocks Hold Up to Frostline Restrictions and Will They Sink?

Basically they won’t be allowed. If your area has frost line restrictions which vary up 70” in northern areas, they won’t likely be allowed for permanent or residential structures. The structure on blocks also can’t be fastened to a permanent structure with frost protection (foundation down to frost line). The blocks float on the ground and will raise and lower with the frost. That is also a factor for underground mechanicals that raise to the structure. Obviously, you don’t want one section raising and lowering and another not. It would cause structural damage and separations. The deck blocks can sink if the soil under them erodes for some reason or the weight is unevenly distributed. That’s why it’s a good idea to use more than less.

How many studs do I need for a 10x10 shed?

For a 10 foot exterior or interior or partition room or shed wall or load bearing or non bearing wall, you will need 9 to 11 number of 2×4 vertical...

Last updated Dec 27, 2020

Is it cheaper to build your own carport?

For instance, building a metal carport can cost you anywhere between $3500 and $4000, but if you buy the materials yourself and build your own...

Last updated Jan 18, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Dispersing the weight is the idea and diverting water away from the structure. Especially in loose soils or wet conditions which requires more weight distribution. Deck blocks will normally be quicker and cheaper to install than concrete footings. Blocks will allow minimal surface prep or digging as opposed to concrete piers which will usually require excavation of large amounts of dirt, more labor and associated costs. The blocks can be buried but typically aren’t more than a couple of inches. Concrete footings will provide greater support due to the higher mass and surface area but will usually require more time and money. Piers will provide a greater lateral (sideways) and overall support than blocks.

How Many Deck Blocks Do I Need?

The quantity will depend on the soil conditions, weight, layout, and the size of your structure. Softer soil or heavier structures will require more weight distribution. Structures like small decks or sitting on a rock will require less. Generally speaking, you want support every 3-4′ for a normal use building and 4-6′ for lighter situations. An average 12′ x12′ can use around 18 blocks, but more is certainly ok, just space evenly. There are a few variables for the quantity of blocks so drawing everything out is a good idea or using an online calculator can be useful. There are too many factors to show how to use it, but a little research can aid your plan and give you a nice drawing.

How to Build a Shed Foundation with Deck Blocks

Since your structure will sit on the blocks, it’s important to level your blocks. If you’re using posts on the blocks, the grade level isn’t as important as if your beams etc. are sitting right on the blocks. That will require much more attention to level.

Required Tools:

Step #1

Start with a plan and write it down, so steps aren’t missed.

Step #2

Step #3

Step #4

Step #5

Decide ifis needed to reach your overall structure height. Gravel isn’t needed, but some like to use it.Different slopes may require other options or placement of your blocks depending on the steepness of the grade(ground).Then calculateand prepare the area as needed using level string lines, a laser transit or other level method.Compaction or hand tamping is always a good idea for any foundation method.

Step #6

After placing blocks continually check your beam, orwith the longest level possible and square it up. Don’t use a 2′ level on 16′ lumber, it will rarely show actual level especially with treated lumber. One can measure diagonals or use the 3-4-5 multiples technique. Which means mark from corner to 3′ on one leg, the other side should be 4′. Measuring between the marks should be 5′ as illustrated. Multiples can be used for larger structures like 6-8-10. Use the largest multiple without extending beyond your structure, for best results. Deck blocks make a very stable base, but can be difficult to level if the ground settles; especially once the shed is built. The more the ground is disturbed trying to level the deck blocks, the greater the chance they will settle out of level over time. I prefer the advanced method that makes the deck blocks adjustable. A great way to reduce settling and make a level base is to use adjustable 4×4 steel deck supports (check current price on Amazon) with the deck blocks. The steel supports fit into the center hole in the blocks and are easy to adjust to make a level base for your shed, with minimal ground disturbance. Use concrete mix to fix the adjustable 4×4 supports into the hole in each deck block.

What's the rarest flower in the world?

The 10 Rarest Flowers In The World The Middlemist's red is the rarest flower on Earth. The stinking corpse lily is the largest flower on Earth. 571...

Last updated May 22, 2022

Why not to use pea gravel?

Pea gravel that is directly on topsoil can lead to weed growth, tripping hazards, and an unsightly garden.

Last updated Oct 24, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Material List

deck blocks – how many you need

4×4 adjustable steel deck supports – 1 for each deck block

Concrete mix – just add water

The following is a step by step on how to make adjustable deck blocks. Picture 7 & 8: To make a better bond between the concrete and the block, wet the block. Use a trowel to fill the hole and slots in the deck block with concrete. Push the 4×4 support cylinder, tape end first, into the concrete in the center of the deck block. Picture 9: Angle the steel base plate so it rests on the deck block, similar to Picture 4. Smooth the concrete and remove any mess. Let the concrete harden and dry. I recommend placing the blocks together and doing the same step to each. Once the concrete is cured, align the deck blocks according to your foundation plan and level each one. They do not have to be level with each other. Insert the bolt end of the bracket and place the beam into the brackets. To level the beam, tighten or loosen the nut. You now have adjustable deck blocks.

Now you are ready to build your shed.

Here’s a video about how to build shed base using concrete deck blocks (traditional way): Where I live, we have a lot of snow and during the winter, temperatures sometimes drop below -22F(-30C). Here’s the video that shows how the foundation looks after 2 years of harsh weather.

Conclusion

Deck blocks can be a very quick easy way to build a foundation. You will have to decide if they will work for your situation and your local building regulations. If you need something quick and easy, they will likely work. If it’s any kind of building, I strongly recommended to anchor it down in some way to combat the high winds. If you’re building something to last a while, I suggest considering a concrete pier as they get the mass and stability of being in the ground. Digging a hole setting a cardboard sonotube in it at the correct height is pretty quick and easy. It will require mixing and pouring the concrete, but in the long run, it’s usually the preferred method. Especially if the frost line is involved which it is for most of the US and likely all of Canada. Check with your local building permit office, even if it’s just to check what’s required for your general area. Even if it’s not required it’s a good practice to follow it.