Photo: Vlad Chețan

Can wood season without being split?

Firewood doesn't necessarily need to be split to season but splitting wood when it's green can help speed up the drying out process. If you're looking to season your wood as fast as possible be sure to cut the logs to length and split them prior to stacking.

fireplaceuniverse.com - Does Firewood Need To Be Split To Season? - Fireplace Universe

How many square feet is a 14x14 room?

200 sq ft 200 sq ft. The primary bedroom in the house might be around this size. Another way to look at it is the size of a one car garage. Its...

Last updated Feb 21, 2020

How do you make Pebble magnets?

Prep the pebbles by laying them in front of the circles in a line. Add a dot of glue to each circle, press the glass pebble, hold for a second and...

Last updated Jul 7, 2022

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

The process of turning wet wood into useable firewood through seasoning can be lengthy. There are a number of things you need to consider to help firewood season properly including stacking the wood correctly, placing the wood under a suitable cover and keeping the wood off any moist ground.

But does firewood need to be split to season?

Firewood doesn’t necessarily need to be split to season but splitting wood when it’s green can help speed up the drying out process. If you’re looking to season your wood as fast as possible be sure to cut the logs to length and split them prior to stacking. We’ve explained in more detail below why firewood doesn’t need to be split to season but why it can help to do so, as well as discussing why we don’t split our own firewood before it’s seasoned.

Does Firewood Need To Be Split To Season?

In order for wood to burn efficiently when used on a fire it must be dry enough so that it doesn’t lead to issues such as struggling to burn and producing more smoke. The moisture content of firewood should be between 15 and 20% for it to burn effectively on a fire, as recommended by the Environmental Protection Agency. The moisture content of freshly cut ‘green’ wood can be much higher than the recommended 20% maximum for firewood. A branch from a deciduous tree on our property showed a moisture content of 45% in early spring, which if used in a fireplace or wood stove would burn highly ineffectively and potentially lead to a fire that keeps going out. The moisture content of green wood is far too high to be used as firewood The seasoning process is therefore required in order to bring the moisture content of wood down to a level that allows it burn well when used as firewood. The moisture content of firewood needs to be 20% or lower to burn efficiently Although there’s minimal cost to seasoning your own firewood, it can be a very long process depending on the type of wood you’re drying, its starting moisture content and how well setup the wood is to dry. Depending on your situation, you may want to be seasoning your wood as fast as possible so that it can be ready for the next winter season. One of the other factors that can determine how quickly firewood dries is its size.

Are sheds warmer than outside?

Asking exactly how much warmer a shed is than the outdoors has a single answer: it depends. The precise temperature of an unheated shed depends on...

Last updated Aug 19, 2021

What are 3 types of ramps?

The Different Types of Home and Portable Wheelchair Ramps Threshold Ramps. A threshold ramp can be composed of either metal or rubber. ... Lego-...

Last updated Mar 4, 2020

Promotion

Larger sized logs can take longer to season than smaller sized ones. If you’re looking to season your wood as fast as possible then it can be preferable to split the wood down to size before its left outside to dry. If you have a large supply of firewood and don’t need to season it quickly in order to get it ready to use before the next burning season then it’s not as necessary to split the wood beforehand. Ultimately, it’s down to your preference whether it’s better to split wood green or seasoned. Splitting wood before seasoning is only one of the factors that can influence how well and how quickly firewood dries. Other variables that impact how well and quickly firewood seasons includes whether: The wood stack has a cover over it and how efficient that cover is. A roof on a wood shed or overhang from an adjacent structure works best. Tarpaulin sheets work quite well but moisture can build up under the cover if some of the wood stack isn’t left open. and how efficient that cover is. A roof on a wood shed or overhang from an adjacent structure works best. Tarpaulin sheets work quite well but moisture can build up under the cover if some of the wood stack isn’t left open. The firewood is kept off the ground . Placing wood directly on soil will cause moisture to seep up into the lower layers of the stack, and these logs will start to go bad rather than season properly. We place our logs on a dry concrete platform to season. . Placing wood directly on soil will cause moisture to seep up into the lower layers of the stack, and these logs will start to go bad rather than season properly. We place our logs on a dry concrete platform to season. The stack is open to the atmosphere. The wind and sun play a key role in drying out the wood so it’s important that at least one end of the logs is open to the air.

We follow these recommended guidelines and here’s how we season our firewood:

Our firewood is stacked up against the back of our garage, which has an overhang that helps to keep the majority of the rain and snow off the logs.

How long should ground settle before pouring concrete?

An hour at most would be sufficient to let dirt and dust settle before you start pouring. If you have used a combination of water and rollers (or...

Last updated Mar 9, 2021

Are resin sheds any good?

Durability: Even though resin sheds are relatively light, they are really highly durable. Their sturdy material will not crack easily. They are...

Last updated Sep 7, 2021

Promotion

The wood is also stacked on a concrete base allowing any excess water to runoff into the adjacent ground, and to also prevent moisture from the ground from seeping back up into the wood. You’ll also notice that we don’t split our wood prior to seasoning it. Much of the wood gathered from our property is also small enough in diameter to burn in our wood stove. The logs are simply cut to the right length so that they can be used straight away as firewood as soon as they have been properly seasoned to below 20% moisture content. We also have more firewood than we typically burn and so we don’t need to worry about how quickly the wood needs to dry. For the larger sized logs we’ll therefore split after it has fully seasoned. When buying in your firewood you’ll typically find that your seasoned or kiln dried firewood has already been split. If you buy in your firewood you’ll notice that it’s already split so that it could season quicker As it’s the seller’s business to get the wood ready quickly to sell, they split the wood before seasoning to help ensure that the firewood is drying out as fast as possible. If you’re looking to improve the time to takes for your wood to fully season then look to split your logs prior to stacking them to start the seasoning process. If you aren’t constrained by time you can choose to either split your wood prior to or after seasoning, depending on your preference. The majority of the moisture is lost through the ends of the logs and so leaving the stack open at one end to the air can be more important when drying out your wood.