Can you use PVC pipe to move a shed?

The truth is, Moving a shed with PVC pipe can be very effective, and schedule 40 works just fine. Plus, it's in ready supply for most folks. We moved a 12 x 10 shed about 50 feet across uneven terrain from one end of our yard to another, even steering around a tree that was in our way.

protoolreviews.com - How to Move a Shed with PVC Pipe in 6 Easy Steps - Pro Tool Reviews

What is a Barndominium house?

A barndominium, also known as a barndo, is an open concept steel building with large square footage that combines living space and a working area....

Last updated Sep 7, 2020

Can a 2x8 span 20 feet?

In general, a 2×8 will span 1.5 x 8, so 12-feet. Based on all factors though, a 2×8 joist span is 7'-1” to 16'-6”, and a rafter 6'-7” and 23'-9”.

Last updated Oct 27, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Most people would have no idea how to go about moving a large storage or garden shed. It seems like an insurmountable task or something that could result in a lot of damage if not done correctly. Some people use 4×4 pickups and tow chains – ouch that could cause some serious damage to your shed – not to mention your poor yard! Others recommend using galvanized pipe to roll the shed. That’s overkill. The truth is, Moving a shed with PVC pipe can be very effective, and schedule 40 works just fine. Plus, it’s in ready supply for most folks. We moved a 12 x 10 shed about 50 feet across uneven terrain from one end of our yard to another, even steering around a tree that was in our way. It was quick, easy, and didn’t tear anything up in the process. Here’s how we Moved a shed with PVC pipe (a picture is worth a thousand words, so don’t expect us to write everything out). This how-to project is best communicated through photos—and we took a bunch. We’ll outline each necessary step to get you on your way. The first thing you want to do is make sure you have the necessary tools and parts to get the job done:

Floor jack (two will make it even easier)

8 pieces (or more) of 6″ PVC pipe (can be 6-8 feet lengths)

Concrete or block to use as pads

pressure-treated or cedar shims

Two 2 x 4 x 12s

4-foot level

3-4 buddies

Moving a Shed with PVC Pipe in 6 Easy Steps

Jacking Up the Shed and Inserting the PVC Pipes

The first thing you’ll need to do (after you empty the shed and plan your “route”) is jack up the shed and insert the PVC pipes underneath the entire structure. For purposes of this article, we assume you know how to use a floor jack safely: To lift the shed, use a floor jack. You don’t have to use a high-tech NASCAR-style jack as we did, any old 2-ton jack will work just as well. Bottle jacks may come in handy during this project, however, they require additional clearance that the floor jacks do not.

Jacking up the shed and inserting PVC piping underneath

What is the true color of rose?

purplish red Rose is one of the tertiary colors on the HSV (RGB) color wheel. The complementary color of rose is spring green. ... Rose (color)...

Last updated Oct 16, 2022

How do you stop gravel from moving on a slope?

The solution to the problem of loose gravel sliding down a sloping driveway is to stabilise the gravel slope using Nidagravel gravel stabilisation...

Last updated Aug 22, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Take a Look Under the Hood

The only thing potentially tricky about this first step is understanding how the joists run underneath the floor of the shed. Our shed had floor joists that ran parallel to the PVC pipe and they all sat upon a couple large 4×4 posts. It was those posts that we kept on top of the PVC piping. If your shed is aligned in the opposite manner, simply insert your own 2x4s above the PVC and across the support 4×4 posts so you can get rolling in the proper direction. We actually ended up doing this near the end as we had to switch gears and push the shed back into place. In order to switch directions, we inserted two 2x4s and rotated our PVC 90 degrees. Once the 6″ PVC pipes are underneath the shed you are ready to roll. Keep in mind that the idea is to slightly cantilever the shed across the PVC pipe, rolling it gently across as you go, When the shed rolls off the rear pipes you simply bring them to the front and continue rolling. If you’re like us, however, you may have to adjust to get around some obstacles. Turning the shed was easy, and we simply re-aligned the PVC to continue in the desired direction. As luck would have it, we needed to “steer” around a tree that was in our way. To do this we simply pushed the shed at the corner to twist it around – it slid easily on top of the smooth plastic PVC.

Keep the Pipes Aligned

After we got it twisted, we realigned the PVC as we went to again get it rolling in the correct direction. Once we cleared the obstacle, we re-aligned it and pushed it straight across. At no time did the PVC pipes ever show any sign of strain or collapsing. Those who recommend 3- or 4-inch galvanized piping apparently like to spend money, or possibly have some lying around. If you only have 4″ PVC piping lying around (for 6″ you may have to borrow some from your friendly neighborhood construction worker) you can use it, just expect to have to push a little harder and use more piping.

Final Shed Positioning

How long will a galvanized steel shed last?

Long Lasting Metal is not used on its own much these days. It is coated in vinyl and or galvanized to make it long lasting. You can expect your...

Last updated Aug 21, 2022

How do you lock pea gravel in place?

The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you're stabilizing pea gravel with cement, it will...

Last updated Jan 7, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Once we had the shed all the way across the yard we needed to push it back into place. To do this we couldn’t just turn the PVC pipe 90 degrees, we had to give them something to roll on as well. Since we had those two 4×4 supports, we needed to insert a couple of 2x4s across the PVC pipes (which we had now turned 90º to roll the shed back into place). This is where you will again require the use of a good floor jack. Rolling, rolling, rolling… keep those pipes a-rolling…You can pretty much push an empty shed with one person once it’s on PVC pipes.

Leveling It Out

Once the shed is in place, use a level to determine how you need to support it. Shim any uneven areas with pressure-treated lumber or cedar shims. Once placed in the final resting position, cedar shims work wonders to get your shed level and properly positioned.

The Final Location

Here is a shot of the shed in its final location, shimmed and supported. This took us about an hour to complete once we had disengaged the hurricane straps from the bottom of the shed and got it ready to begin. The hardest part might be securing the PVC – and a few friends to help provide enough muscle to move the shed. This is something a novice could undertake and it’s a safe, easy, and convenient way to relocate any shed that has an integrated floor.

protoolreviews.com - How to Move a Shed with PVC Pipe in 6 Easy Steps - Pro Tool Reviews