DIY Builds
Photo: Vlada Karpovich
Planning Permission is usually not required Adding a garage or shed to your property can be a great idea, it gives you extra indoor space for storage of lawnmowers, garden tools, bulky household items or, in the case of a garage, your car, keeping it away from adverse weather conditions and more secure.
A regular space heater draws 12.5A. That would mean your car battery would last for 3.6 hours with a space heater.
Read More »
In most cases, Garden Rooms are classed as outbuildings, which means you won't have to seek any kind of planning permission to build your space....
Read More »
The Problems of Modular Homes Foundation Cost. A downside of modular homes is pouring the foundation. ... Payment May Be Required in Full. One of...
Read More »
Yes, it is possible to have a toilet in your backyard office. It will naturally take up a bit more space, because you will have to put in a room...
Read More »
Safety Considerations. There is no doubt that wiring a shed is a job that can be simply undertaken by a qualified electrician, and unless you have the relevant knowledge and skills, you should never go down the DIY route. This is the main thing to consider in terms of safety.
Whilst wiring a shed isn’t the most complicated electrical job in the world, there are some things that should be considered before work takes place. For example, where you will run the cable. Of course, using a steel wired armoured cable under the ground is the most sensible option and this needs to end up at the shed. However, depending on your property, the cable may run in several courses. For the most part, you should be able to run the line directly from your fuse box. However, if the fuse box does not have enough circuits, a new one may be required and this should always be carried out by a qualified electrician. This will, of course, add to the cost of wiring the shed so it is important to budget for this when making your plans. Additionally, it is a good idea to determine the location of the cable before calling in your electrician and marking this out on the ground. SWA cables are designed to withstand moisture and rot and so can be safely buried under the ground with no risks. Furthermore, the size of the SWA cable should be taken into consideration. Speaking to your electrician will give you a good idea of the type of cable that you will need but in most cases between 16mm and 25mm will be sufficient. In terms of amperage, your SWA cable should run from an RCD of 20 amps which is more than enough in most cases.
Traditionally, condensation is managed by insulating the metal roof so that the panel temperature never reaches the dew point. This is often...
Read More »
To keep your shed waterproof, fill any cracks or gaps you may find with builder's caulking or expanding foam. You can further protect your doors by...
Read More »
Thankfully, installation of a toilet is generally not concerned with planning permission, but it's worth checking with your Local Planning...
Read More »
Woodworking is the skill of making items from wood, and includes cabinet making (cabinetry and furniture), wood carving, joinery, carpentry, and...
Read More »