DIY Builds
Photo by Francesco Ungaro Pexels Logo Photo: Francesco Ungaro

Do I need planning permission for a garden shed?

You must apply for householder planning permission to erect a garden building, greenhouse or shed if: the total area of ground covered will be greater than 50 per cent of the total land around the house. it will be at the front of the house. it will be at the side of a house which is in a conservation area.

How much does it cost to run plumbing in a tiny house?
How much does it cost to run plumbing in a tiny house?

Plumbing in a tiny house is expected to cost $3,000-$7,000. This, however, does not include the cost of labor. This only includes the cost of...

Read More »
HOW FAR CAN 2x4 header span?
HOW FAR CAN 2x4 header span?

A 2×4 can span a maximum of 6' 7” when spaced 16” apart and used as a floor or deck joist. When used as a ceiling joist or a roof rafter, a 2×4 can...

Read More »
Are shed plans easy to follow?
Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Do I need planning permission?

Flats

You must apply for full planning permission to erect a garden building, greenhouse or shed in your garden. This includes timber sheds.

Houses

You must apply for householder planning permission to erect a garden building, greenhouse or shed if: the total area of ground covered will be greater than 50 per cent of the total land around the house

it will be at the front of the house

it will be at the side of a house which is in a conservation area

it will be built in the grounds of a listed building

it will be at the side or front of a house covered by an Article 4 Direction

it will be more than one storey high

it will be more than 4m high with a pitched roof or 3m high with a flat roof. If it will be within 2m of the boundary of the house, it must be 2.5m high

its eaves will be more than 2.5m high

it will include a veranda, balcony or raised platform.

Where can I find more information?

The outbuildings section of the national planning portal has lots of guidance and useful information. You can find more information on the design of garden buildings on page 36 of Camden Planning Guidance 1 - Design (PDF)

Can I get confirmation that I do not need planning permission?

You can apply for a Lawful Development Certificate (LDC). This is to prove that an existing or proposed garden building, greenhouse or shed is lawful. Apply for a Lawful Development Certificate to prove an existing or proposed garden building, greenhouse or shed is lawful.

Am I likely to get planning permission?

To find out whether your proposal is likely to be accepted, you can apply for pre-planning application advice.

How do I apply?

You can apply via the national planning portal. To find out what information is required with your application, see making a planning application.

Still not sure whether you need planning permission?

If you need further advice about whether you need planning permission, contact planning advice and information.

What size shed is 200 square feet?
What size shed is 200 square feet?

10×20 200 sq ft Built for the backyard enthusiast, a 10×20 200 sq ft shed is the perfect size for storing all of your lawn and garden equipment....

Read More »
Do you put rebar in a basement floor?
Do you put rebar in a basement floor?

Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in...

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Can I put a shed on grass?

Lawn, gravel or dirt are not suitable bases - It is not recommended that you build your new shed directly onto a lawn, bare ground or gravel. Not only can this result in subsidence and warping, but can also lead to damage from damp.

So you've bought your new shed, you're now waiting for it to be delivered and you've considered where you would like to build it in your garden. Below you will find example of what to do and what not to do, when preparing your garden.

Have you prepared the ground ready to install your new shed onto?

When installing a timber shed you must ensure that you have a even and level surface onto which you can build it. This can be made using either concrete, garden slabs or even timber decking. Failing to prepare a level surface will lead to your shed warping, which can result in damaged timber or even broken windows. If you're using one of our shed bases you will still need to clear the area for rubble. It's also a good idea to lay a weed proof membranes, to prevent growth and eventual damage to your shed.

But I've paid for a shed installation service, do I still need to prepare my garden?

Yes.

Our installation teams will not clear your garden or lay a concrete surface for you. You will need to make sure that you have prepared the area in time for your delivery and installation.

What should you put a shed on?
What should you put a shed on?

Sheds can be built on the following type of foundations: Concrete floor. Concrete piers. Compacted gravel. ... Concrete Shed Foundations The build...

Read More »
Is a 4x8 sheet of plywood really 4x8?
Is a 4x8 sheet of plywood really 4x8?

The actual size of a 4x8 sheet of plywood is 48 inches wide, 96 inches long, and (commonly) 15/32 inches thick. Jun 28, 2022

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
What is the cheapest way to roof a shed?
What is the cheapest way to roof a shed?

In most cases, MSR roll roofing is the cheapest shed roof material you can buy. Roll roofing is also the easiest shed roof to install because you...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
How do you stop a metal building from sweating?
How do you stop a metal building from sweating?

5 Ways To Prevent Condensation In Metal Buildings Use Proper Insulation. Insulation that regulates the temperature inside of a metal building helps...

Read More »