Photo: Monstera

Do plastic sheds suffer from condensation?

Metal Sheds and plastic Sheds will only suffer from condensation when dampness is present in the foundations. The air inside the shed is always slightly warmer than outside and therefore, any moisture in the foundation base will rise until it touches the cold roof panels.

smgardensheds.com - Garden Sheds Base Preparation and Condensation Prevention

What should be updated first in a kitchen?

Tear Out and Demolition. The first step of any kitchen remodel is tear out and demolition. ... Rough-In Work Including Framing and Plumbing. ......

Last updated Jul 23, 2019

Is it OK to have maggots in compost?

EUGENE – Most people shudder when they see maggots in their bin composter or compost pile. Don't be grossed out – they won't hurt you. In fact,...

Last updated Jul 15, 2018

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

CREATING A CONCRETE BASE

Step 1:

Decide where to position the building in an optimal space, allow enough distance from hedges or fences for easy access to all sides. Using pegs and string to mark out the base to the dimensions of the shed/foundation kit and measure diagonally to ensure the area is square. To get this to the right size you could build the foundation kit/shed base rails first and marks out using the outside edge of the framework.

Step 2:

A Concrete base requires 3 inch (7.5 cm) of compacted hardcore (not supplied) underneath the 3 inch (7.5cm) concrete layer. The base can be level with the ground or raised above it. If it is to be level excavate the top earth to 6 inch (15cm) to allow for the hardcore layer and the 3 inch (7.5cm) thickness of concrete. Level the area with a rake and remove the pegs.

Step 3:

Set up leveled framework if you have not got a foundation kit. Spread a layer of well compacted hardcore and cover with a liberal amount of sand. (Hardcore and sand not supplied)

Step 4:

Place a DPC (Damp Proof Membrane) on top of the sand. This is to prevent rising damp once the concrete has set. (Please note that the illustration is just to show the DPC, only use timber framework if you do not have the foundation kit option, as the foundation kit has its own shuttering). (DPC not Supplied).

Step 5: (If you have ordered a foundation kit)

Construct the foundation kit (if not already built) and lay it into your working area. Step 6: (If you have a foundation kit, construct the building before commencing with this stage) Lay DPM (Damp Proof Membrane) and mix the concrete (not supplied) using one part cement to five ballast or use bags of dry-mixed concrete to which you just add water. Small amounts of water should be added at a time and mixed into the concrete mix to ensure excessive amounts are added making the cement sloppy, as the concrete should be kept on the dry side.Spread the concrete evenly and slightly proud of the framework. This can be levelled off to the top of the foundation kit frame with a long straight edge of timber resting on the edges of the foundation kit or top of the formwork using a sawing motion slowly (as shown below) over the entire surface of the freshly laid concrete. You should be able to see the top surface of the foundation kit flush with the concrete. If wet weather is forecast, cover the concrete with polythene for 24-hours. In warm weather cover the base with damp sacks and sprinkle them with water over the 24-hour period, this will ensure the drying concrete will not shrink or crack. The result is a smooth, sound, level base. The perfect foundation for the construction of an outdoor storage building.

What is the best wood to build a log cabin out of?

The most common species used in the log home industry is Pine, Cypress and Cedar. Of those, Pine is the majority of what is used. The Original Log...

Last updated Jan 11, 2020

What credit score do you need to build a house?

Construction Loan Requirements To win approval for a construction loan, you may need: Good to excellent credit. To reduce their risk, lenders...

Last updated May 8, 2019

Promotion

How long do metal sheds last?

alansfactoryoutlet.com - How Long Does a Metal Shed Last? - Alan's Factory Outlet

On average, you can expect a metal storage shed to last over 10 years without any noticeable damage or need for extensive maintenance. Some can last even as long as 25 years. So, if you want a long-lasting shed that requires little-to-no maintenance, a metal shed is the way to go. Metal sheds offer many benefits to consumers. With strong protection against harmful elements and a spacious interior for storage, metal sheds are structures you can depend on. Perhaps most importantly, however, is the longevity you can get out of one without much beyond any minimal and seasonal maintenance; an aspect that no other type of shed can match. Wooden sheds are aesthetically appealing but don’t last nearly as long as their metal counterparts without significant upkeep. The wood used in their construction is far more susceptible to mold, rot, and general wear and tear. This leads to less reliable protection for your tools, equipment, and other various items stored inside. Furthermore, this means you’ll have to replace your wooden shed more frequently than you would a metal one.

How much is a 20x20 concrete patio?

between $1,200 to $6,000 A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials. Adding decorative...

Last updated Jan 22, 2022

Can I put polyurethane over epoxy?

Applying polyurethane over epoxy is a perfect idea as it will protect your project from UV rays and scratches. It is safe to put polyurethane over...

Last updated Jun 21, 2022

Promotion

How long will OSB last outside if painted?

OSB, which is protected from the elements or sealed with paint or stain, can last for decades. Some exterior OSB wall panels are even guaranteed...

Last updated Mar 31, 2018

Promotion

Should I split logs before seasoning?

Split the Wood First things first you must split the wood, Splitting the wood before seasoning increases exposed surface area which subsequently...

Last updated Sep 10, 2022