Do uPVC windows require maintenance?

Be sure to wash down the PVC-u at least twice a year, with warm soapy water and wipe it dry. Regularly clean the glass with a clear liquid spray glass cleaner. Never Paint PVC-U window frames or use paste and cream cleaners which can be mildly abrasive.

windsealdoubleglazing.co.uk - How to maintain your uPVC windows and doors - Windseal Double Glazing

Why is my shed damp inside?

This is because the interior of a shed is warmer than outside and the problem starts with moisture present in the foundations. or which may have...

Last updated Nov 10, 2020

How do Barndominiums hold up in storms?

Most barndominiums are built with a metal structure made of steel, and this is a great plus in the face of a tornado. The structure of...

Last updated Apr 16, 2020

Promotion

How to maintain your uPVC windows and doors

We recommend… That you carry out routine maintenance on your windows, doors and / or conservatory at least twice a year. In areas of high exposure, you may want to do this more frequently. All parts of your new windows and doors that are exposed when closed, should be washed down with warm soapy water using a soft cloth, then dried thoroughly. Any parts that are exposed when the window and doors are open, should simply be wiped clean, removing any grime, dirt, insect remains or old lubricant. You should avoid using any cleaning agents that have ammonia in them or that are abrasive, particularly on handles and other metal fittings. Special attention should be paid to keep drainage channels clear and free from any blockages. Any moving parts and fixings are treated as follows…The application of light oil, to keep the locking mechanism in good working order. A suitable acid and resin free grease should be used on sliding bars, gears and face plates. Maintenance of friction stays is important and we recommend that you follow the guidelines for lubrication and adjustment. Note: Hardware should be operated and maintained strictly in accordance with manufacturers instructions.

Casement Windows

Friction Hinges

Maintenance is important but straightforward. Keep the friction stay track free from dirt and grime and keep the hinge mechanism clean. Lubricate the metal parts regularly with light oil, concentrating on the pivot points. Friction can be increased or decreased by adjustment of the turning screw. Turn in a clockwise direction to increase friction. Take care not to over tighten.

Egress Friction Hinges

In order to facilitate a maximum clear opening, egress hinges may be fitted. In most cases this will be an upstairs window and allows the window to be opened to 90°. Some egress hinges combine the opening facility with an easy clean system, whereby the vent can be slid sideways to allow external cleaning to be carried out from inside. To utilise the easy clean facility, open the window normally, then press and hold down the button on both hinges to release the restrictor hinge. Slide the sash across to allow egress.

Window Locking Mechanisms

How do I get hot water in my shed?

How to get water to your shed Decide on the type of water supply you need. Dig a trench and lay a water pipe. Choose an appropriate drainage...

Last updated Sep 19, 2018

What can I use for a shed base?

Gravel is the best shed foundation, especially for portable buildings that come with a wood floor. Concrete is the ideal foundation for a garage or...

Last updated Jun 8, 2022

Promotion

Windows fitted with either an Espagnolette or Shoot Bolt locking system will allow the window to remain partly open at night to facilitate ventilation. To engage the window in its night vent position, open the window to approximately 15mm and then return the handle to its locking position. You may feel slight resistance so do not try to force the handle, simply move the window slightly until you find a point where there is no resistance and close. Check the window is held securely in the night vent position by pushing gently on the vent – if held securely it should not move. Maintenance of locking systems is simple: apply light oil to the moving parts, once a year. Similarly, a little grease should be applied to the locking slots to facilitate smooth running.

Ventilation Control

Windows can be fitted with a trickle ventilation unit, located at the top of the frame. This is designed so that you can control ventilation and minimise any build up of condensation. Simply open or close the ventilator by pushing the finger recess to the left or right. No maintenance is required.

Vertical Slider

Vertical Slider Mechanism

The hardware requires simple lubrication. An application of light oil will keep the locking mechanisms in good working order.

Window Operation

The window is opened for ventilation by unlocking the snail cam(s) located on the top face of the bottom sash using the key provided (if key locking versions are fitted). Turn the cam(s) until released from the keep(s). The bottom sash may now be slid upwards and/or the top sash may be slid downwards. To close the window slide both sashes fully closed and re-engage the snail cam(s). The window is opened into the cleaning position by opening the bottom sash to approximately 100mm (as previously described). Both tilt catches are then slid inwards releasing the top of the sash. This can then be pulled inwards and rested on it’s restrictor to allow safe cleaning of the glass from inside the building. The top sash can now be slid down. Both of it’s tilt catches are then slid inwards releasing the top of this sash. This can then be pulled inwards and rested on it’s restrictor to allow safe cleaning of the glass from inside the building.

Tilt & Turn Windows

Tilt & Turn Mechanism

Maintenance is important but straightforward. Keep the locking mechanism clean and free from dirt and grime. Lubricate all locking points and strikers regularly, with light oil to facilitate smooth running.

Window Operation

How do I keep water out of my shed?

How to Waterproof Your Shed Choose an Appropriate Location. ... Raise the Shed Off the Ground. ... Choose the Right Foundation. ... Build a...

Last updated Jul 25, 2021

What's the cheapest fence to install?

PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to...

Last updated Apr 14, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

The window is taken into the tilt position for ventilation by unlocking the handle (if required) and moving it through 90°, to the first position. The window is then pulled gently inwards tilting on its lower edge. Any slight resistance felt at this stage is caused by the anti-slam device that prevents the window being blown shut when subjected to higher wind pressures. To close the window it is pushed shut and then secured by turning the handle back to the closed position. The window is taken into the turn position for cleaning. This is done as above but the handle continues to turn through 180° to the upright position. The window can then be hinged in to allow cleaning of the window from inside.To close the window reverse the above procedure. It must be stressed that this position is for cleaning only and should not be used for ventilation. Please note: The above operation is for “Tilt before Turn” or “Tilt First” gear. “Turn before Tilt” or “Turn First” gear is also available although less common. If this is fitted the handle position shown above for the Tilt Position & Turn Position would be reversed.

Residential & French Doors

Door Locking Mechanisms

Doors can be equipped with a hook or cam lock mechanism. In some cases there may be a split spindle lock – this means you cannot enter the house without using a key to open the door.

Locking

To operate the lock, insert the key into the cylinder. Rotate the handle upwards and turn the key for one complete revolution to activate the deadbolt, which locks the whole mechanism. Release the handle.

Unlocking

Insert the key into the cylinder lock and disengage the deadbolt by turning one complete revolution. Depress the handle and open the door. Where a split spindle is fitted in addition, after you have depressed the handle, turn the key a further quarter revolution to release the latch.

Handle Options

Traditional front doors can be fitted with an external pull-pad operated handle with a lever operated internal handle. Back doors are usually fitted with a lever operated handle both internally and externally. Maintenance of the locking systems is simple: apply light oil to the moving parts, once a year. Similarly, a little grease should be applied to the locking slots to facilitate smooth running. Note: All hardware should be operated and maintained strictly in accordance with manufacturers instructions.

windsealdoubleglazing.co.uk - How to maintain your uPVC windows and doors - Windseal Double Glazing

What size wire do I need to run 50 amps 100 feet?

In most cases, 6 AWG is an almost perfectly-sized wire for a 50 amp breaker. In limited cases, you will probably have to use a larger 4 AWG wire....

Last updated Nov 12, 2022

Will a 2x4 sag?

So, to answer your question, “yes, the 2x4 will sag over a 16' span AND the compression added by the wire will not save it.” Nov 13, 2017

Last updated Jul 30, 2021

Promotion

Can plastic sheds be insulated?

Can All Sheds Be Insulated? First things first, it's important to note that not all storage sheds are suitable for insulation. For example, metal...

Last updated Dec 4, 2020

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

How do I choose an exterior door?

Here are some tips to get you started: Choose the Optimal Door Material. Begin by looking at your material options and select the best fit for your...

Last updated Jan 13, 2022