Do you need planning permission to turn a bedroom into a bathroom?

As with re-fitting kitchens, there's normally no need for planning permission unless the building is listed. Building Regulations are only likely to apply where you decide to add a new bathroom, for example in a former bedroom or storage area. This may include some or all of the following: New drainage.

warwickdc.gov.uk - Refitting or adding bathrooms - Renovating your home

How can I make money overnight?

More Ways To Make Money While You Sleep Cashback Passive apps. You have probably heard of cash back sites such as Rakuten and BeFrugal. ... Sell...

Last updated Jul 20, 2022

Can I put a mobile home on my property in Georgia?

A manufactured home can also be placed on a site temporarily for six months for residential purposes while a site-built home is constructed....

Last updated May 18, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Consents

As with re-fitting kitchens, there’s normally no need for planning permission unless the building is listed. Building Regulations are only likely to apply where you decide to add a new bathroom, for example in a former bedroom or storage area. This may include some or all of the following:

New drainage

New ventilation

Structural alterations, e.g. taking out walls and chimney breasts

Gas fitting and new boiler/hot water cylinder installation

Electrical work

The last two items can usually be self-certified by approved installers, but Building Control will need to carry out inspections for new work such as drainage and structural alterations. Ventilation should also be provided with ducted extractor fans and trickle vents to windows.

Refitting a bathroom

When it comes to replacing an existing bathroom suite, the job is made considerably easier if you select new fittings that match the old ones in size as closely as possible, especially baths and shower trays. With a bit of luck they should simply ‘slot in’ with minimum upheaval – although connecting up a new suite to decrepit old imperial-sized pipes can require a certain amount of ingenuity. Beyond the choice of sanitary fittings and taps, there are other design issues to ponder, such as whether to re-tile the walls, fit new towel rails, and install storage cupboards. While you’re at it, it’s worth upgrading the bathroom to comply with current Building Regulations in terms of ventilation – fitting a ducted extractor fan will help reduce condensation and mould. Also lining the main walls with insulation, upgrading the lighting and fitting secondary or double glazing can be worthwhile energy efficiency improvements. Also, pay careful attention to the detailing at the edges of baths and shower trays as the joints where fittings abut the walls are a common cause of leaks. Use purpose-made sealing trim strips or a suitable silicone mastic sealant. Where you want to install a totally new bathroom, the existing hot and cold water supplies will need extending. The waste pipes will also need to be carefully planned so they connect into the existing system, plus you may need some new central heating pipework for any additional radiators or towel rails. Don’t forget to allow for the boxing-in of surface-run pipework so that it’s neatly concealed. The only restriction on DIY plumbing is competency, so this is an area you may want to tackle yourself. The electrics may also need extending, although sockets are not permitted in bathrooms. If space permits, it’s normally a good idea to have a separate shower cubicle within a bathroom, rather than just a mixer over the bath. Or you may like the idea of a walk-in wet room, with fully tiled waterproof floors and walls.

Which is better concrete block or poured foundation?

Poured concrete wall foundations are arguably stronger than cinder blocks. Poured walls have a better lateral strength, which means they can resist...

Last updated Feb 22, 2018

How long should a 3 step ramp be?

A ten foot ramp is minimally suitable for most situations where you've got 3 steps to overcome and the rise is 20″ or less. Assistance would be...

Last updated Mar 29, 2022

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Pipework

Most pipework is run in copper, although plastic pipes are increasingly used for new work. When it comes to running pipes in timber floors the critical points structurally in joists are the centre and the ends. In traditional joists, notches should be cut from the top (no deeper than 1/8th depth) and it’s a good idea to fit small steel shields over the top of cut notches to protect pipes from subsequent puncturing should anyone carelessly hammer nails into floorboards. But modern ‘I-joists’ must not be cut – they have pre-formed slots to accommodate pipes and cables. The Building Regulations require new water supply pipes to be fitted with non-return valves to prevent ‘back siphonage’, and these can also provide a handy on/off control to allow maintenance works. To prevent any risk of scalding, temperature controlled thermostats should be fitted to hot water supplies to showers and baths.

Waste pipes

Waste pipes need to be laid to suitable falls with sufficient support-clips so they don’t sag. Internal white plastic waste pipes and fittings are push-fit and should be surface run rather than buried in floors. When designing a new bathroom you need to take account of the fact that there is a maximum distance that you can locate your new basin, WC and bath from the soil and vent pipe waste stack (SVP) before there is a risk of ‘siphonage’ occurring. This constraint can influence the layout of new bathrooms. However it may be possible to fit special ‘anti-siphonage’ traps or bigger bore pipes. Installing a new bathroom or WC ‘Durgo Valves’ (air admittance valves) usually need to be installed. Unlike conventional SVPs these vent automatically and relieve excess pressure without emitting odours. They don’t need to terminate way up at roof level, and instead can be neatly boxed in, and are sometimes placed unobtrusively in loft spaces.

Foul and surface water

There are two types of waste water: rainwater from gutters and foul waste from bathrooms, cloakrooms, kitchens and utility rooms. These must not be mixed up, as it can lead to problems with flooding and pollution, even causing disease. Waste plumbing for new bathrooms must be connected to the underground foul drains, not into a handy nearby rainwater downpipe for example. This is something that Building Control will want to check before issuing a completion certificate.

WCs

Is a bathroom without a tub considered a full bath?

Typically, a bathroom must have a toilet, sink, and tub to be considered a full bath. A bath with a toilet, sink, and shower, but no tub, would be...

Last updated Mar 22, 2022

How close can a shed be to a Neighbours fence?

In some areas, you are allowed to build as close as four feet away from your property line. In other places, your LPA may ask you to keep your shed...

Last updated Oct 24, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

One of the first questions you need to ask when designing a new bathroom is ‘where are the drain runs?’ This tells you where it would be realistic to fit new bathrooms without running into plumbing problems. Where a new WC is installed some distance from the foul drains, one possible solution is to install a macerator. These work by mashing up the waste so it can be pumped out through conventional narrow-bore 38mm pipes rather than requiring the normal larger 100mm WC pipes. But because they rely on electrical power, the home must have at least one conventional WC, in case of power cuts.

Baths

Most modern baths are either lightweight steel or acrylic, but they still need to support a substantial weight of water and occupant(s) when in use. So it’s important that the feet are firmly supported. Some traditional cast iron baths are extremely heavy with miniscule feet which transfer incredibly high loadings to the floor surface. So it may be necessary to first strengthen the floor.

Showers

To operate effectively, showers often require the water pressure to be beefed up with a powerful pump together with a separate new cold supply. Shower trays can also be prone to developing leaks, the worst offenders being thin acrylic ones which can be prone to distortion. Ceramic or stonecast trays are generally preferable. Or you could opt for a simple mixer over the bath with a shower screen (although these can be difficult to make fully watertight).

warwickdc.gov.uk - Refitting or adding bathrooms - Renovating your home

What is a good depth for a garage?

Once you do some math, you'll see that the depth of your dream garage should be no less than 30 feet deep. This gives you lots of space for a...

Last updated Jan 13, 2022

How do you make a shed climate controlled?

Here are some HVAC options for your shed. The cheapest air conditioning solution is a window unit. They are inexpensive and will do the job in such...

Last updated Dec 27, 2021

Promotion

How do you dissolve toilet paper in a sewer line?

Follow these measures on how to dissolve toilet paper in a sewer line: Use a toilet plunger. Pour hot water and dish soap into the bowl. Toilet...

Last updated Oct 19, 2020

Promotion

Is 12x16 a good size shed?

12×16 Sheds Most Common Uses The 16' of depth gives you a good amount of room for long items like kayaks, canoes, long ladders, etc. If you are a...

Last updated Apr 13, 2019