Photo: Mizuno K

Does pressure treated wood attract termites?

Pressure-treated wood is resistant to termites, but make sure that there's no contact with soil. Pressure-treated wood is wood that has had a chemical preservative forced into the pores to form a barrier that resists decay and wood-eating insects like termites and carpenter ants.

colonialpest.com - Will Termites Infest Pressure-Treated Wood? - Colonial Pest Control

How do you anchor a storage shed?

How to Properly Anchor a Shed: The Only Guide You Need Drill or dig the holes, tamp some gravel into the bottom. Slide a sonotube in to form it up....

Last updated Sep 28, 2021

Do I need planning permission for a lean-to on the side of my house?

You can add a lean-to conservatory without planning permission to your home, as long as it is within the boundaries of your property and doesn't...

Last updated Jul 15, 2022

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

Will Termites Infest Pressure-Treated Wood? By Chris Williams on June 25, 2014.

Pressure-treated wood is wood that has had a chemical preservative forced into the pores to form a barrier that resists decay and wood-eating insects like termites and carpenter ants. Pressure-treated wood is used primarily where wood is in close contact with soil such as decking, fence posts, mailbox or light posts, trellises, or gazebos. Building codes may require that pressure-treated lumber be used in construction for below-ground installations and wherever wood will be touching soil.

“Termite-Resistant,” Not “Termite-Proof”

People mistakenly think that if their deck is made of treated wood, they don’t have to be as careful about the wood touching soil. It’s protected from termites, right? That may be true in the short term, but even pressure-treated wood is not fully protected from termites or decay. Construction codes in the U.S. state that pressure-treated wood is considered to be “termite-resistant.” It doesn’t say “termite-proof” and that is the difference. Pressure-treated wood may be protected for a while, but if it stays damp enough for long enough and starts to rot, termites can feed on it. Also, when pressure-treated wood is used in construction, there will be new cut wood ends, as well as new notches and drill holes that are not protected and are supposed to be spot-treated with the preservative on site. That rarely happens. The problem here is that the chemicals leach out of the wood over a period of 7-10 years, so while the outer 1 inch of the boards seems to retain some protection, the inner wood does not. If there is any kind of a crack or hole where termites can bypass the outer protected surface and enter the wood, all bets are off. Termites will also build mud tubes over the surface of pressure-treated wood to reach untreated wood. That’s not to say you should forget about buying pressure-treated wood. Some protection is certainly better than none. Much better, though, to take precautions and build your deck to last. Anytime you build with wood, pressure-treated or not, do not allow wood to make direct contact with soil. Soil contains moisture and fungi that rot wood. Termites live in soil and move through soil looking for embedded wood to feed on. Any wood, pressure-treated or not, that is directly in contact with soil will eventually rot and become susceptible to termite and carpenter ant attack. Wood members like door frames or lattice work should be at least 6 inches above the ground.

Wooden support steps or posts should be mounted on a concrete base

When pressure-treated wooden posts are buried in the ground, the portion below grade should be completely encapsulated with concrete. Photo credit: ntm1909 / Foter / Creative Commons Attribution-NoDerivs 2.0 Generic (CC BY-ND 2.0)

Is plywood or OSB stronger?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb...

Last updated Nov 16, 2022

What are the benefits of PVC doors?

The Benefits of UPVC Windows & Doors Customisable. Typically most UPVC windows, doors and external facias will come in white. ... Security. The...

Last updated Feb 28, 2018

Promotion

What screws to use with OSB?

fastenersplus.com - #12 x 3/4" Type 17 Woodbinder Metal Roofing Screw For OSB - Unpainted,

Sealtite Kwikseal #12 type 17 Woodbinder screws are designed to be used as a “rescue screw” for oriented strand board (OSB). This fastener will replace nails or smaller diameter fasteners that have loosened & backed out of OSB metal roofing over time. This cost effective rescue screw saves money and hassle when the orginal nail or screw is stripped out of OSB. Coated screws feature a tough 2.5 mils of powder coating that will not chalk or fade due to the UV inhibitor in all colored coatings and the automated coloring process ensures a consistent color each batch. 5/16" HWH with bonded sealing washer will completely cover existing hole, even if elongated by movement in the metal roof. Type 17 point will help clean the existing hole so that oversized threads can tap & generate maximum holding strength and the unique Strip-Loc threads are ideal for fastening metal panels to light density wood such as OSB. The EPDM rubber is vulcanized to the steel washer to prevent delamination & form an excellent seal even when driven at an angle. California Residents: WARNING Sealtite Kwikseal #12 type 17 Woodbinder screws are designed to be used as a “rescue screw” for oriented strand board (OSB). This fastener will replac... Read More

Can you build your own furniture?

Not only is building your own furniture much less expensive than buying from a store, it puts you in control. You can select just the wood and just...

Last updated Jun 5, 2021