DIY Builds
Photo by Mashup Photography Pexels Logo Photo: Mashup Photography

How can I keep my shed cool in the summer?

Tips to Keep Your Shed or Garage Cool in Summer Heat Increase ventilation. During the summer months, increasing airflow in the garage or shed ranks at the top of shed cooling tips. ... Add insulation. ... Install radiant barrier. ... Seal gaps with weatherstripping. ... Install an awning.

What are signs of mold exposure?
What are signs of mold exposure?

Some people are sensitive to molds. For these people, exposure to molds can lead to symptoms such as stuffy nose, wheezing, and red or itchy eyes,...

Read More »
Does a stairlift use a lot of electricity?
Does a stairlift use a lot of electricity?

A washing machine uses 0.7kWh (700 Watts), while a stairlift can be as little as 0.024kWh. That's only 24 Watts per hour – significantly less than...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Don’t let the heat keep you from getting the most out of your garage or shed! There are many practical ways to keep garages and outdoor storage sheds comfortable. Keeping the temperature levels down not only makes using these spaces more pleasant, it can also help to prevent problems such as rusted tools and warped lumber. Increase ventilation. During the summer months, increasing airflow in the garage or shed ranks at the top of shed cooling tips. This can be achieved by opening the garage door about a foot, or fully opening the shed door and turning on a fan or two to circulate air. Installing vents on the roof or gable wall will allow hot air to escape from the attic or upper level. Adding a powered exhaust fan will accelerate the cooling process. Add insulation. Adding insulation in walls and ceilings is an important step to stave off summer heat and also keep out winter cold. Cooling a storage shed becomes more effective with insulation to help regulate the temperature. Install radiant barrier. LP® Outdoor Building Solutions® manufactures shed roof sheathing and wall panels with SilverTech® radiant barrier to help reduce the sun’s energy radiating through the panels. These products are an ideal choice to help keep the interior of sheds and workshops cooler. Seal gaps with weatherstripping. If your shed has air conditioning, applying caulk and weather stripping is one of the simplest, most cost-effective methods to help keep temperatures more comfortable and your energy bills lower. Sealing gaps around windows, doors and other openings will keep hot air out and cool air in. Install an awning. Installing awnings over doors and windows can reduce solar heat gain in the summer by up to 77% on west-facing windows and 65% on south-facing windows. Retract the awnings in the winter to prolong the life of the awning fabric and let in warm sunlight for passive heating.

Build a New Shed With LP Products

If you need a new shed or outdoor structure, LP Outdoor Building Solutions products can be combined in virtually endless ways to complement any property. Your local shed dealer can take you step-by-step through the shed selection process. Find out where to buy sheds built with LP products today!

What is a driveway apron?
What is a driveway apron?

A "driveway apron" is defined as any paved roadway between the curb line of any street and the adjacent property line or the parkway side of the...

Read More »
How much does it cost to charge an electric car at a charging station?
How much does it cost to charge an electric car at a charging station?

EV charging is close to $0.30 per equivalent litre assuming an off-peak kilowatt hour of $0.15 (better reflected as range).

Read More »

Can I put a shed on gravel?

Lawn, gravel or dirt are not suitable bases - It is not recommended that you build your new shed directly onto a lawn, bare ground or gravel. Not only can this result in subsidence and warping, but can also lead to damage from damp.

So you've bought your new shed, you're now waiting for it to be delivered and you've considered where you would like to build it in your garden. Below you will find example of what to do and what not to do, when preparing your garden.

Have you prepared the ground ready to install your new shed onto?

When installing a timber shed you must ensure that you have a even and level surface onto which you can build it. This can be made using either concrete, garden slabs or even timber decking. Failing to prepare a level surface will lead to your shed warping, which can result in damaged timber or even broken windows. If you're using one of our shed bases you will still need to clear the area for rubble. It's also a good idea to lay a weed proof membranes, to prevent growth and eventual damage to your shed.

But I've paid for a shed installation service, do I still need to prepare my garden?

Yes.

Our installation teams will not clear your garden or lay a concrete surface for you. You will need to make sure that you have prepared the area in time for your delivery and installation.

What can I use on my shed roof instead of felt?
What can I use on my shed roof instead of felt?

EPDM membranes are fast-becoming the roofing industry's go-to alternative to felt and other outdated roofing materials. The composition of EPDM as...

Read More »
Where should a loafing shed be placed?
Where should a loafing shed be placed?

The ideal site for your run-in shed is basically a high, dry spot, preferably one where your horses already like to hang out. You'll want to add a...

Read More »
Is it cheaper to use cinder block or wood?
Is it cheaper to use cinder block or wood?

Typically, concrete is far more expensive than lumber. But the price difference has mostly been erased with lumber's increased cost — and in some...

Read More »
Can I live on my land without planning permission?
Can I live on my land without planning permission?

No. “It is not an offence to carry out development without first obtaining any planning permission required for it” ( PPG18 Para 6). It will...

Read More »