How deep does a concrete shed base need to be?

75mm thick The concrete base should be at least 75mm thick, with a similar layer of sub base, so you will need to excavate to the required depth and ensure that all plants, stones and debris are removed before compacting the ground with a roller or tamper.

hanson.co.uk - How to lay a shed base | Hanson UK

How do I get a free Ring doorbell 2022?

Make sure to download the Neighbors app to start earning credit to get a free Ring Doorbell! Jul 23, 2020

Last updated Aug 17, 2021

What is your secret to become a successful skilled worker?

Pay attention to the smallest of details. Keep working and contributing – even when you are done with YOUR job. Look to understand the overall plan...

Last updated Jul 16, 2022

Promotion

Concrete is perfect for creating a solid, hard-wearing base for your garden shed. The first step is mark out the area where the concrete will be laid, adding an extra 100mm to the width and length of the finished shed to allow a small edge around the base. Also add in a further 75mm all-round to accommodate the timber formwork which will hold the wet concrete in place while it is drying. The easiest way to mark the area is with a string line and stakes, making sure the corners are right angles. The concrete base should be at least 75mm thick, with a similar layer of sub base, so you will need to excavate to the required depth and ensure that all plants, stones and debris are removed before compacting the ground with a roller or tamper.

Building formwork

The formwork is constructed using 25mm timber planks and it is vital that this is level as it will determine whether your finished concrete slab is level. Place additional pegs at 1 metre intervals around the outside of the formwork to provide extra support when the concrete is being poured. Then add 75-100mm of hardcore and compact before adding a layer of building sand to protect the damp-proof membrane. If there are any joints in the membrane, these should be overlapped and taped and the edges should be turned up against the formwork to form a tray. Concrete needs to be poured and levelled quite quickly as it begins to ‘go off’ within two hours of being mixed, so you will need to make sure everything is ready before the concrete delivery truck arrives. Calculate the volume of concrete you need (length of concrete slab x width x depth or use our concrete volume calculator) and make sure you order a concrete pump if your site is hard to reach or the volume of concrete if too large to place by wheelbarrow.

Concrete mix for shed base

What happens if you don't sand wood before painting it?

As a general rule, if you don't sand the wood before painting then the applied paint could peel off after a while. This will only happen, however,...

Last updated Jul 31, 2022

What am I allowed to build without planning?

Outbuildings such as sheds, garages, greenhouses and some other structures like garden rooms are also considered to fall within permitted...

Last updated Sep 1, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

A standard concrete mix ratio of 1 part cement to 5 parts ballast (aggregate and sand) is usually perfectly adequate for shed bases but you can add reinforcing fibres if you are housing anything particularly heavy. if you are unsure ask for advice from your ready-mixed concrete supplier. It’s extremely important that you wear the correct safety clothing (long sleeves and trousers, gloves, rubber boots and safety goggles) as concrete is caustic and can cause serious injury if it comes in contact with skin or eyes. Learn more about safety precautions you should take here.

Laying a concrete shed base

Begin to pour the concrete into the furthest corner of the formwork and use a rake or shovel to spread it evenly, ensuring it is around 10mm higher than the formwork to allow for it to be compacted to remove any air pockets. This is a two-person job and requires the use of a straight piece of timber, longer than the width of your formwork. With one person at either end, the timber can be used to compact the concrete and then level it in line with the top of the formwork by performing a sawing motion. Ensure there are no low spots and the corners are filled before running a trowel along the sides of the formwork to smooth the edges and reduce the chances of it chipping. It is important that the concrete doesn’t dry out too quickly so, if the temperature is likely to reach 20°C or above, use plastic sheeting to cover the slab for at least 24 hours. The concrete can be walked on within 48-hours but ideally the formwork should remain in place for at least five days before removing and building the new shed.

hanson.co.uk - How to lay a shed base | Hanson UK

Which is better spray foam vs blown in insulation?

Between the two, closed cell spray foam is easily the better insulator, especially in attics where space is tight. Plus, its moisture-resistant...

Last updated Aug 17, 2019

Why am I getting Mould in my shed?

If the outside temperature drops, any moisture inside the shed will cause condensation on the inside of the shed panels, roof, floor and possibly...

Last updated Jul 6, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How long does it take to learn Blender?

It takes approximately 20 hours to learn an application like Blender to a level where the user can be confident in using the software for whatever...

Last updated Nov 29, 2020

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

How big is a mini mansion?

Mini mansions are exquisite houses at least 4,000 square feet and built looking luxurious but with less expensive materials and more like a cookie-...

Last updated Nov 5, 2019