Photo: Pressmaster

How do I get rid of green mold in my shed?

Opinions vary on the makeup of the cleaning solution, but a rough guide is 1 cup of bleach to every gallon of water – that, or you can use a mould cleaner. Use either a handheld spray bottle or a garden sprayer to apply this. Scrub with a sponge, and then hose or scrub down afterwards with clean water.

barnardfencing.co.uk - Garden Shed Care: Preventing damp and removing mould

What is the maximum size you can build without planning permission?

You can build a garage or outbuilding on your property without planning permission as long as it's of a reasonable size – no higher than 4 metres....

Last updated Aug 25, 2018

What is the biggest sq ft tiny house?

The Denali XL The Denali XL is the largest tiny house from the Timbercraft Tiny Homes brand. The 400-square foot house feels like a mansion amidst...

Last updated Jul 11, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

A timber shed is a charming addition to an outdoor space, and a common feature of gardens up and down the country. However, damp and mould can be the downfall of these attractive outhouses, which can leave homeowners searching for answers to combat this problem. To help you rid yourself of these issues, we’ve put together this quick guide to how to remove mould and prevent damp in your garden shed.

What causes damp?

As the name suggests, damp is caused by damp conditions and is most prevalent during seasons where moisture is more common in the air – such as in winter and spring. Wood is the most susceptible material to damage by moist conditions, and damp can cause premature rot, mould and cause the timber structure to become misshapen or sag. These problems can also be exacerbated by wet weather and lack of airflow through a shed.

How can I prevent damp in my garden shed?

Sheds can sometimes be abandoned for months on end, especially in the colder seasons, meaning that no fresh air flow is entering the building. This stagnant air can hold a lot of moisture which then condenses and causes mildew and mould. To prevent this, try and get some air circulating by leaving windows open, blowing a fan in the shed, or even drilling some holes in the upper walls (covering them with mesh to keep pests out). A common problem in timber sheds is rising damp, when water from the ground is absorbed through the floor bearers and up into the floor. To deter this, there are some things you can do during shed construction. Try and get some kind of barrier built between the shed floor and the ground, or try and get a gravel base installed to allow water to permeate freely through it to prevent pooling. Ensure any paving or concrete slabs are set as levelly as possible to allow rainwater to flow away easily. There are also some simple tool-care tasks that can help; keep them dry and disinfected to avoid mould formation.

Do clothes get moldy in storage?

Clothing and upholstery that get put in storage while damp can attract mold, and metals and woodwork can rust or rot. Moisture can easily migrate...

Last updated Mar 5, 2021

How much does it cost to build an outhouse with plumbing?

The cost to build an outhouse is $1,500 to $5,000. Options with a composting toilet system run the most.

Last updated Jun 30, 2019

Promotion

How do I remove mould from my garden shed?

It is imperative that mould is removed from wooden structures as soon as it’s detected; if left for too long, then it may become more entrenched and permanently damage the timber. First, you need to make sure you are protected from inhaling the mould spores, so try and wear a surgical or ski mask during the operation. Also wear gloves if possible. Secondly, try and protect your plants. If you are removing mould from the outside of your shed, then the cleaning solution you decide to use may settle on surrounding vegetation and damage it. Before you begin, hose down your plants to discourage the chemicals from sticking to them and causing problems. Opinions vary on the makeup of the cleaning solution, but a rough guide is 1 cup of bleach to every gallon of water – that, or you can use a mould cleaner. Use either a handheld spray bottle or a garden sprayer to apply this. Scrub with a sponge, and then hose or scrub down afterwards with clean water. Experts in supplying and installing high quality garden sheds and timber fencing, the team at Barnard Fencing pride ourselves on our excellent customer service and wealth of industry experience. Our family run firm have been installing, maintaining and repairing sheds and fencing for over 30 years, so we’ve got your needs covered. If you’re in the Nottingham area and are looking for a trusted contractor, give our team a call – we are happy to give you a free quote.

barnardfencing.co.uk - Garden Shed Care: Preventing damp and removing mould