DIY Builds
Photo by Charlotte May Pexels Logo Photo: Charlotte May

How do I stop my metal building from sweating?

5 Ways To Prevent Condensation In Metal Buildings Use Proper Insulation. Insulation that regulates the temperature inside of a metal building helps reduce condensation. ... Install Vapor Barriers. ... Ventilate The Interior. ... Look Up For Condensation Troubles. ... Prevent Water From Seeping Below.

cdmg.com - Do Metal Buildings Sweat? 5 Tips To Prevent Condensation - CDMG
What is the cheapest material to build a shed out of?
What is the cheapest material to build a shed out of?

Using pallets to build a shed is the most affordable of shed building methods. There are nearly infinite ways to make a pallet shed, but most use...

Read More »
Last updated Dec 12, 2022
What happens if you cut too much off a door?
What happens if you cut too much off a door?

If you cut material away from the doorknob side, it will change the backset (the distance from the doorknob to the edge). If that happens, the...

Read More »
Last updated Aug 19, 2021
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »
Promotion

Eliminating Condensation Problems in Metal Buildings

While rot and termites don't pose a threat to metal buildings, metal buildings can still suffer damage from excessive moisture.

(Check out our article Are Metal Buildings Cheaper Than Wood?)

Damp insulation is less effective at regulating temperatures in a metal building and may promote mildew growth, making the building's interior smell musty and potentially contribute to allergy or asthma problems. Wet insulation that's in contact with metal surfaces can cause corrosion, even on surface-treated metals. The panels and fasteners may begin to rust, leading to premature failure of these materials.

So why do metal buildings sweat?

How can we prevent or stop our metal buildings from sweating?

In the article below, we examine those questions.

Table Of Contents

Why Do Metal Buildings Sweat?

Condensation occurs when there's more moisture than the air can hold.

Warm air can hold more moisture than cold air, but as the warm air cools, it reaches saturation and water droplets form. Ceiling drips and surface moisture are caused when warm moist air comes in contact with the cooler roof-line or walls of your metal building. High interior humidity is a common cause of condensation. It usually comes from your heating and air conditioning system, the way yo use your building, improper construction techniques, human respiration, or oil or gas-fired heaters. All of those things give off the moisture that can lead to condensation. Condensation tends to occur more often in climates where the temperature often falls below 35 degrees Fahrenheit for an extended period.

Types Of Condensation

There are two types of condensation; visible and concealed.

Visible condensation occurs on surfaces such as water, frost, and ice. You may see it on insulation vapor retarders, skylights, cold water pipes, and cooling ducts. Concealed condensation is more damaging and difficult to deal with. It occurs when moisture is passed into the interior of the building and condenses on a surface that has a temperature at or below the dew point.

There are many ways moisture can enter the buildings envelope, including:

Do sheds ever go on sale at Costco?
Do sheds ever go on sale at Costco?

Since winter is the off-season for shed buying, many shed retailers become strapped for cash. To improve cash flow, they often offer spring buying...

Read More »
Last updated Mar 28, 2019
Can you apply linseed oil directly to wood?
Can you apply linseed oil directly to wood?

It is important to apply this finishing oil only on bare or previously oiled wood, since any other finish such as paint, varnish or wax will...

Read More »
Last updated Jan 18, 2022
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion

Improper vapor retarder selection

Improper installation of the vapor retarder

Improper insulation installation

Leaks in the roof

Lack of a structural air barrier

An incorrect vapor pressure differential between the inside and outside of the building Concealed condensation can be seen as damp spots, stains, mold, and mildew on walls or ceilings. It may show up as delamination of laminated surfaces, bubbles or blisters in asphalt surfaces, peeling paint, or damp insulation.

5 Ways To Prevent Condensation In Metal Buildings

1. Use Proper Insulation

Insulation that regulates the temperature inside of a metal building helps reduce condensation. It keeps the interior temperature from fluctuating as much between day and night, limiting the amount of dew deposited on surfaces overnight. It also prevents warm, moisture-laden air from reaching the metal surfaces on the interior of the building. For insulation to work effectively, it needs to be continuous. Placing it only between metal studs will allow water vapor to accumulate between the panels and seep into the insulation.

2. Install Vapor Barriers

Vapor barriers will also help protect your metal building from condensation.

This barrier helps to keep moisture from the outside from penetrating into the building. Sealing the building envelope is what helps keep moisture to a minimum. That can't be stressed enough. Many vapor barriers are also designed to serve as radiant heat barriers, addressing the temperature differential and humidity at the same time. Windows, doors, foundation sills, and side/end laps need thorough sealing to keep moisture out.

3. Ventilate The Interior

There are countless reasons moisture can occur inside of your metal building, increasing the humidity. In agricultural buildings, for example, livestock gives off a lot of moisture as they breathe, sweat, and eliminate.

Gas and oil-based heaters also raise the humidity.

That's why it's important to encourage air exchange between the interior and exterior to help keep things dry. Opening a window, running a fan or AC compressor, or installing screened vents or louvers on the walls and/or roof are great ways to encourage the exchange.

Heaters should always vent to the outside of the building.

Can I buy a house with an extension and no planning permission?
Can I buy a house with an extension and no planning permission?

If your house is part of a terrace, the permitted size is less than 10% of the original volume. However, if the extension takes up more than 50% of...

Read More »
Last updated Apr 4, 2018
How do I stop damp in my brick shed?
How do I stop damp in my brick shed?

Use a liquid damp-proof membrane or tanking slurry, which if applied correctly would prevent damp from reaching the internal side of the concrete...

Read More »
Last updated Nov 10, 2021

Dehumidifiers can help in certain situations, but they can be costly and require good drainage.

4. Look Up For Condensation Troubles

If the insulation on the underside of the roof is sagging and not in full contact with the metal, this is a great place for hidden condensation to accumulate and cause trouble. Roof leaks or moisture seeping in through penetrations can cause a lot of moisture to build up in the ceiling insulation over time. This type of problem can occur when flashing is missing, incorrectly installed, or damaged.

5. Prevent Water From Seeping Below

In regions where moisture can seep up from the ground, having gravel, crushed rock, or other drainage materials under the concrete slab can help limit condensation around the base of the structure. Roof runoff and other sources of water should be drained away and diverted from the foundation as well. You can also place a vapor retarder between a subfloor and the ground slab.

Condensation Is Harmful But Preventable

Although metal buildings have countless benefits compared to other construction options, nothing is perfect. Metal buildings are susceptible to sweating, which can lead to further problems like rust and erosion.

However, if you follow the steps listed above, condensation is extremely preventable.

Proper insulation, ventilation, and sealing your metal building properly is key in the fight against condensation. If you take care of those things, your metal building can last for generations. To see how CDMG can help you make the most out of your metal building, or design you a brand new metal building, click on the link below.

If you enjoyed this article, you should give these a read:

cdmg.com - Do Metal Buildings Sweat? 5 Tips To Prevent Condensation - CDMG
What size lumber can span 20 feet?
What size lumber can span 20 feet?

For a 20 foot span, you will need atleast 2×12 size of lumber/ floor joist when spaced at 16″ apart. Thus, a 2×12 size of lumber can allow to span...

Read More »
Last updated Aug 20, 2020
Should you put lightning rods on a metal building?
Should you put lightning rods on a metal building?

Anything in contact with the building itself like electrical appliances can get fried from the sudden surge of energy. Therefore, it's still...

Read More »
Last updated Nov 9, 2018
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion
Do doors have to be a certain height?
Do doors have to be a certain height?

Standard Interior Door Height Code generally requires interior standard door sizes to have a certain height. It needs to be a minimum of 80 inches...

Read More »
Last updated Oct 21, 2020
How many rafters do I need for a shed?
How many rafters do I need for a shed?

What is this? If you have a simple gable shed roof, then using 2×4 rafters makes more sense unless you have a very large shed. If you have a single...

Read More »
Last updated Oct 27, 2019