Photo: esrageziyor

How do I store my bike with limited space?

By far the most affordable option, a screw-in storage hook for your wall or ceiling is a simple yet effective way to hang your bike off the ground and out of the way. Use just one hook to hang your bike vertically or two to hang it horizontally. For the ultimate floor—and wall—space saver, hang your bike up.

bicycling.com - How to Store Your Bike In Every Kind of Space - Bicycling

How powerful of a table saw do I need?

How much power do you need? For hobbyist DIY projects: a table saw with a 2-HP motor pushing 15 Amps should be more than enough. You will be able...

Last updated Oct 25, 2021

Will a swollen door go back to normal?

Yes, a swollen door will go back to normal. The swelling is caused by humidity and temperature changes, which cause the wood to expand and...

Last updated Apr 19, 2020

Promotion

One you’ve picked out your bike storage method, there are still some things you should keep in mind. The conditions in which you’re storing your bike are important to consider, as well as some maintenance measures to keep your bike in working order. Below, we’ve rounded up bike storage tips from our on-staff mechanic, Joël Nankman, who’s been wrenching bikes professionally for 13 years. Avoid Moisture // Many bikes and bike components are made out of metal, and where there’s metal, there’s the potential for rust. If you can, store your bike out of the elements and somewhere dry. “Wet or damp places should be avoided at all costs,” Nankman says. Consider Cardboard // But if you do have to store your bike somewhere damp—like in a garage—place pieces of cardboard under the tires to prolong their life. Just one catch, though—you’ll need to replace the cardboard periodically, “or it becomes an insect breeding hotbed,” Nankman warns. Set the PSI // Next, you should keep the tires inflated so they keep a round shape—it’ll help prevent dry rot. Even if you aren’t riding your bike often, you should still check the tires periodically and adjust the psi accordingly to help prolong tire life. Nankman recommends 5 to 10 psi for a mountain bike and 20 to 30 psi for a road bike when not in use. “Keeping tires fully inflated through a wide range of temperatures is just as detrimental as keeping them completely deflated,” he says. Avoid Extreme Temps // Avoid storing your bike for an extended time in extreme temperatures, such as below freezing or above 110 degrees Fahrenheit. But Nankman acknowledges that’s tough to do if you keep your bike in an unconditioned garage or shed. Set the Dropper Up // If your bike has a dropper post, keep it extended when tucking it away between rides. That will help keep the dropper post functioning properly and extend required servicing. Nankman also notes, “don't hang a bike from the saddle if it has a dropper post.” Don’t Stress About Storage // You may have heard that mountain bikes should be stored upright so that the suspension oil can keep seals lubricated. For some bikes, that is the best way to go. “But honestly, that is not a very steadfast rule,” Nankman says. “And many bikes would actually benefit from being hung upside down.” Keep It Clean // “Always rinse your bike after winter rides, and/or if your bike was on a bike rack on your car in areas where salt and brine are used during the winter,” Nankman says. It’s best to keep your bike clean, anyway. It’ll prolong the life of your components. Mind the Derailleur // Don’t lean the bike on the derailleur side as that could damage it. “But sometimes if there is a chance the bike might fall over, leaning it on the drivetrain side is the safer bet, so it would fall on the non-drive side if it falls over,” Nankman says.

How much does labor cost to install a roof vent?

The average ridge vent price is about $2 to $3 per linear foot. This doesn't include installation, which will run you an additional $45 to $75 per...

Last updated Jun 15, 2020

Can I use a garden shed as an office?

Converting your garden shed into an office could be the ideal solution. Transforming a little-used outdoor structure into a convenient work space...

Last updated Mar 23, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Can you build a shed on top of grass?

Lawn, gravel or dirt are not suitable bases - It is not recommended that you build your new shed directly onto a lawn, bare ground or gravel. Not only can this result in subsidence and warping, but can also lead to damage from damp.

shedstore.co.uk - Guide: How to prepare your garden for a shed - Shedstore

So you've bought your new shed, you're now waiting for it to be delivered and you've considered where you would like to build it in your garden. Below you will find example of what to do and what not to do, when preparing your garden.

Have you prepared the ground ready to install your new shed onto?

When installing a timber shed you must ensure that you have a even and level surface onto which you can build it. This can be made using either concrete, garden slabs or even timber decking. Failing to prepare a level surface will lead to your shed warping, which can result in damaged timber or even broken windows. If you're using one of our shed bases you will still need to clear the area for rubble. It's also a good idea to lay a weed proof membranes, to prevent growth and eventual damage to your shed.

But I've paid for a shed installation service, do I still need to prepare my garden?

Yes.

Our installation teams will not clear your garden or lay a concrete surface for you. You will need to make sure that you have prepared the area in time for your delivery and installation.