DIY Builds
Photo by Rachel Claire Pexels Logo Photo: Rachel Claire

How do you make a concrete ramp form?

Instructions for Building a Concrete Ramp Prepare a subbase for the ramp with 4 inches of compacted gravel. ... Stake and brace the form securely, checking it for level. ... Mix the concrete so it's just wet enough to be workable. ... Round over the edges of the ramp using an edger.

What is a Jadu?
What is a Jadu?

Junior Accessory Dwelling Units (JADUs) are small living units (less than 500 square feet in size) like a studio apartment or efficiency, that...

Read More »
How high can I raise my garden without planning permission?
How high can I raise my garden without planning permission?

1] Raising the level of ground is subject to planning permission. 2] There are permitted development rights which enable a maximum patio or deck...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Guide to Concrete (Creative Publishing International, 2008) takes readers through some of the most popular home concrete and masonry projects. Endorsed by Quikrete, this book includes tips and expert advice that can help readers save hundreds or thousands of dollars in their DIY home projects. The following excerpt is from “Walkways, Patios and Steps” is a great resource on how to build a concrete ramp. Concrete is a great material for small ramps. It’s strong enough to support heavy equipment and can be made with non-slip surface for sure footing in wet weather.

Tools

• Form-building tools

• Concrete mixing tools

• Shovel

• Concrete float

• Concrete edger

• Fine-bristled broom or wood concrete float

Materials

• Compactible gravel

• 3/4 inch exterior-grade plywood

• 2 x 4 lumber

• Wood screws

• Stakes

• Isolation board (if required)

• Vegetable oil or form release agent

• Concrete mix

A simple concrete ramp can be the perfect solution for moving heavy equipment in and out of a backyard shed or for easing the transition between a walkway and a raised patio, driveway, or stoop. Constructing a ramp is much like building a poured concrete walkway or a small slab: you build a wood form over a compacted gravel base, then place the concrete, and finish the surface so it’s level with the top of the form. To create the slope of the ramp, build the sides of the form with pieces of plywood cut at an angle along the top. The key to shaping the concrete into a slope is to use a stiff mixture; if the concrete is too wet, it will slump down to the bottom of the ramp, seeking its own level. As you fill the form, flatten and smooth the concrete with a float, working from the bottom up. Determining the length of the ramp — and thus the slope — is up to you (the longer the ramp, the gentler the slope). However, if you’re building the ramp for wheelchair access, make sure its dimensions, slope, and nonslip finish meet the requirements of the local building code.

Instructions for Building a Concrete Ramp

1. Prepare a subbase for the ramp with 4 inches of compacted gravel. Build the ramp form using 3/4 inch plywood and 2 x 4 lumber. Make sure the side pieces are identical and will sit level with each other across the top. 2. Stake and brace the form securely, checking it for level. If either end of the ramp will meet a walkway, slab, or other permanent structure, attach a piece of isolation board at the juncture. 3. Mix the concrete so it’s just wet enough to be workable. Fill the form, and use a float to pat and smooth the concrete as you go, working from the bottom up. Use a shovel to settle the concrete as you place it, and rap the form sides to help create a smooth finish on the sides of the ramp. 4. Round over the edges of the ramp using an edger. Texture the ramp surface for slip resistance by brooming it or using a wood float for the final finishing. Moist cure the concrete for five to seven days. The form can be removed after three days.

More Concrete Projects:

• DIY Concrete Landscaping and Garden Borders

• How to Mix Concrete

• Setting Posts in Concrete

Reprinted with permission from Guide to Concrete: Masonry and Stucco Projects published by Creative Publishing International, 2008.

Which is better rhino or Revit?
Which is better rhino or Revit?

Rhinoceros and Revit are programs with different properties. While Rhinoceros is a good option for modelling complex surfaces and geometries with...

Read More »
What food is irresistible to rats?
What food is irresistible to rats?

What Foods Attract Mice and Rats? Fruit and berries — Out of all the foods rodents consume, their top two loves are generally fruits and berries....

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Does AARP cover stair lifts?

Unfortunately, no, insurance does not cover stair lifts in the majority of cases. Common Medicare Advantage providers that customers believe may cover stair lifts include AARP, Blue Cross Blue Shield, Aetna, United Healthcare, Cigna, and Humana.

You must be cautious when seeking information on whether or not your insurance company covers stair lifts. The customer service representatives of many providers are unaware of exactly what a stair lift is. They will tell you they cover stair lifts, due to this lack of understanding. Most insurance companies do cover “Seat Lifts” and/or “Lift Chairs.” While these terms may sound interchangeable with the term “Stair Lift,” they are not the same. A seat lift or lift chair is designed to make getting out of a chair or recliner easier. One way to be certain of what type of equipment they cover is to ask for the HCPCS code (also known as billing code) that covers stair lifts. Medicare and Medicare Advantage providers use this system of codes to determine which products and services they cover and which they do not. Ask your provider what code they provide stair lift coverage through, more than likely, they will state one of the codes listed below. These codes do not cover stair lifts.

Can you live in a shed without planning permission?
Can you live in a shed without planning permission?

Fortunately it is unlikely you will need planning permission, however there are a few exceptions. Sheds and summerhouses fall under the category of...

Read More »
Do goats need to be shut in at night?
Do goats need to be shut in at night?

Goats should be locked up at night if they can't otherwise be kept safe from inclement weather, predators, thieves, or other dangerous factors....

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »
How many square feet 12x20 shed?
How many square feet 12x20 shed?

240 sq. ft Square footage: 240 sq. ft.

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
How much slope does a lean to roof need?
How much slope does a lean to roof need?

To guarantee water drainage, a roof should have a slope of at least 1/8 inch per foot of horizontal run, but that's a bare minimum. A slope of 1/4...

Read More »