DIY Builds
Photo by Rengga Istiyanto Pexels Logo Photo: Rengga Istiyanto

How do you make gravel stay in place?

Tamp and Pack. One easy, DIY way to help prevent the spread of gravel is to tamp and pack it a bit. This simply means using a hoe or other tool to pack your gravel down tightly, and then spraying it down with water.

truegridpaver.com - How to Keep Gravel in Place on Driveways and Walkways
When did they stop making true 2x4?
When did they stop making true 2x4?

In 1964, size standards, maximum moisture content, and naming were agreed upon. The nominal 2x4 thus became the actual 1-½ x 3-½ inch board. People...

Read More »
Last updated Nov 8, 2018
Should you paint the floor of a shed?
Should you paint the floor of a shed?

Painting the shed floor helps protect and seal the wood, it reduces splinters, makes it easier to clean, and it looks so much better. Caulk any...

Read More »
Last updated Jan 6, 2020

Filed under Permeable Driveway • 10 minute read

Gravel driveways and walkways are commonly used by many homeowners and business owners alike. The affordability of gravel and relatively low maintenance requirements make it one of the simplest and most efficient materials for paving areas that need to accommodate foot and vehicle traffic. However, anybody with a gravel driveway or walkway knows that the number one downside to using unstabilized gravel as a paving material is the fact that it spreads and moves around. Gravel is made up of many small pieces of rock and when used as pavement, it tends to migrate and spread out when subjected to constant pressure and friction.

Tips to Keep Gravel in Place on Walkways and Driveways

Thankfully, there are plenty of ways to deal with unstabilized gravel. In case you’re looking to maintain gravel driveways and walkways as best as possible, let’s take a look at how to keep gravel in place on walkways and driveways:

1. Increase the Depth

For those wondering how to keep gravel in place on a driveway, this may be the easiest option. The main reason gravel spreads in driveways and walkways is because it’s not been laid thick enough. The top layer is always going to spread a little bit without borders or pavers but if you lay at least 3 inches of gravel, the weight will help compact it and sink it deeper into the ground. You can even lay more than 3 inches, just be careful not to go too deep or the gravel will inevitably become loose and start to spread.

2. Tamp and Pack

One easy, DIY way to help prevent the spread of gravel is to tamp and pack it a bit. This simply means using a hoe or other tool to pack your gravel down tightly, and then spraying it down with water. The water will help the gravel shift around and settle into place better, loosening the soil below and allowing it to better accept the rocks. Just remember not to go overboard with the watering, doing so will make your driveway run and lead to even more spreading.

You want it moist, not muddy.

3. Use Borders

Another way to stop gravel from spreading is to keep it in place with borders. Wooden planks or other durable material can be used to lay borders along the edges of your walkways and driveways. These borders will keep the gravel from spreading out, though they won’t prevent dips or ruts from potentially developing. Wood is the best material to use for straight pathways and driveways, but if you’ve got to deal with curves you may want something a bit more flexible, like stones.

4. Permeable Plastic Pavers

The most effective, durable, and low-maintenance way to stop gravel from spreading is by using plastic permeable pavers from TRUEGRID. Much like borders, they lock the gravel into place. However, the grid paver cells within each paver retain and keep the gravel from moving at all, even within the borders of the paver. This is the ultimate one and done solution. The installation of TRUEGRID pavers is simple and can be completed with basic equipment in less than a day. After the top layer of gravel has been compressed into the pavers, your parking areas, driveways and pathways will never shift or spread again. Once installed, your gravel driveways and pathways will require almost no maintenance at all. Stormwater and all liquids will drain directly through the pavers into the soil below. TRUEGRID’s PRO PLUS® permeable plastic pavers are an example of an affordable and eco-friendly way to eliminate the spread of gravel.

What type of fence is best?
What type of fence is best?

What's the Best Fencing Material for Your Backyard Fence? Cedar Fencing is Both Appealing and Durable. ... Modern Vinyl Fencing is a Great Option....

Read More »
Last updated Oct 21, 2019
Should you glue down plywood subfloor?
Should you glue down plywood subfloor?

The answer: Glue. Although using a subfloor adhesive (or subfloor glue) is not required by code, it is a standard practice that can help prevent...

Read More »
Last updated Sep 24, 2018

By stabilizing your gravel with pavers made from 100% recycled plastic, you won’t have to worry about adding more gravel, wetting down your pathways, or taking any other measures to ensure your pathways and driveways don’t spread out. TRUEGRID pavers can easily be saw-cut to accommodate curves, trees, and other obstacles. In terms of gravel stabilization, you can’t do much better than a cost-effective and permanent solution like the TRUEGRID PRO PLUS® paver system.

Stop the Spread of Gravel Once and For All

Gravel can be used as a stylish and professional-looking paving material, even for commercial applications. There are multiple ways to utilize gravel, from simply adding at least 3 inches of gravel, to using borders or tamping and packing. These methods are temporary fixes, though, and not as effective or efficient as using TRUEGRID PRO PLUS® pavers. If you want to stop gravel from spreading for good, locking it into place with permeable pavers from TRUEGRID is the best way to do it. Not only will you benefit from the clean-cut, professional look of these durable and eco-friendly pavers, but you won’t have to waste another minute tending to loose, unstabilized gravel in your driveways and pathways. option for the base layer of a gravel driveway is item #4. Item #4 is comprised of sand, dirt, and golf ball-sized stones. This type of gravel is available in a few different variations including recycled item # 4, which is made up of recycled stones, brick, blacktop, concrete, and rock. There is also quarry item # 4, or crushed limestone, gray item # 4 which appears dark grey in color, and crushed bluestone item #4. Crushed bluestone item #4 is usually found in municipal driveways, though. The middle layer of a gravel driveway features stones closer to golf ball size, with #57 stone being the prominent type of gravel. Otherwise known simply as crushed gravel, #57 stone also helps promote drainage.

5 Types of The Best Surface Gravel for Driveaway

There isn’t a lot of variety for the bottom layers of a gravel driveway, however, there are more options when it comes to finding the best gravel for driveway surfaces. Among the other options are crushed stone #411, quarry process, pea gravel, jersey shore gravel, marble chips, and river rock. These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

1. Crushed Stone #411

It is crushed up #57 stone combined with rock dust. This mixture is able to handle moderate traffic from heavy vehicles.

2. Quarry Process

It is also called “crusher run” and works well for the surface of both driveways and walkways. It’s made from stone dust fines and crushed stone. The stone dust will settle and become compact to create a semisolid surface that is smooth. It is important that you know that this type of surface gravel needs to be sloped towards the sides of your driveway for better drainage.

3. Pea Gravel

Are tiny houses losing popularity?
Are tiny houses losing popularity?

Some will say that tiny homes are a fad, but the trend is still going strong. In fact, the market is set to grow by $3.57 billion between 2022 and...

Read More »
Last updated Jul 28, 2018
What is the most common firewood?
What is the most common firewood?

Oak Is the Most Common In the United States, oak is probably the most common type of firewood. Regardless of where you live, you can probably find...

Read More »
Last updated Feb 1, 2018
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion

Pea gravel is popular gravel for driveway aesthetics. It’s made up of round, small stones that can come in many different colors. This type of gravel will easily migrate and spread under the weight of vehicles, though, and needs to be stabilized for long-term, maintenance-free usage.

4. Jersey Shore Gravel

It is made of yellow, tan, white, gold, and brownstones and looks quite a bit like sand. It’s similar to pea gravel since it needs borders or stabilizing pavers to prevent it from spreading.

5. Marble Chips

Marble chips are white and they sparkle in the sunlight. They typically cost more than other gravel types but are another favorite when it comes to being the best gravel for driveway aesthetic appeal. This type of gravel also needs a border or stabilization to prevent it from spreading, migrating, and washing away.

6. Blackstar or Blacktrap Rock

A very attractive dark gray gravel, this is an excellent choice as it is angular and locks together. When combined with stabilizing grid paving system, this provides a super durable and beautiful driveway.

A Better Alternative to Typical Gravel Driveways

Some of the aforementioned gravel types require stabilization, but the best way to construct any gravel driveway is by using TRUEGRID permeable pavers to lock in your gravel. TRUEGRID PRO LITE and PRO PLUS stabilizing pavers simply require fill gravel and surface gravel, although you can use the same type of gravel for both. The fill gravel is poured over the top of a piece of fabric at the bottom of the excavated area where you want your driveway that provides drainage for water and other liquids. It is then compacted and leveled before TRUEGRID permeable pavers are snapped in place over the surface. Next, your surface gravel of choice is poured over the pavers and locked into place using a heavy roller or vehicle. This weighs the pavers down and locks them securely into place. The main benefit of using TRUEGRID pavers to build a gravel driveway is that they will keep your gravel in place, eliminating the need for almost any maintenance during the course of your driveway’s lifetime. A properly installed and maintained TRUEGRID gravel driveway is durable enough to handle all types of vehicle traffic and will last up to 60 years without cracking or breaking down in the sun, rain, or other types of weather like asphalt does.. Choosing the best gravel for driveway usage is only part of the equation. If you want to build your gravel driveway the maintenance-free way, get in touch with the pavement professionals at TRUEGRID today for a quote.

Related Posts

truegridpaver.com - How to Keep Gravel in Place on Driveways and Walkways
Why is Styrofoam a good insulator?
Why is Styrofoam a good insulator?

Polystyrene and plastic foam are both used as insulators as they have small air bubbles trapped inside them. This makes them very good insulators...

Read More »
Last updated Sep 26, 2021
Do I need pressure treated plywood for shed?
Do I need pressure treated plywood for shed?

Ordinary exterior-grade plywood is made with weather-resistant glue, but the wood itself is not particularly rot resistant. This is why pressure-...

Read More »
Last updated Mar 13, 2019
Is it cheaper to buy or build garage shelves?
Is it cheaper to buy or build garage shelves?

The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab –...

Read More »
Last updated Aug 29, 2022
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion
What is Category 3 venting?
What is Category 3 venting?

Category III is defined as a gas heating appliance with a flue loss equal or greater than 17% (non-condensing) with a positive vent static...

Read More »
Last updated Sep 28, 2018