DIY Builds
Photo: Erik Mclean
Small sheds can go on concrete slabs or blocks. Larger sheds can also use slabs or blocks as a foundation to raise them off the ground. Concrete pads and foundation walls are usually used for larger sheds.
The Netherlands is the largest flower producing country in the world with about 68% contribution of the annual flower production. The reason for...
Read More »
If you want to regularly service your car by yourself, then a 2-post lift is the right choice for you. You can also use a 2-post lift to store one...
Read More »
You'll find one-half in. thick plywood works well for wall and roof sheathing, but use at least five-eighths in. plywood for your shed floor....
Read More »
You might prefer a detached garage if your lot size is long and narrow, as this structure can be built behind the home to take advantage of the...
Read More »
The first thing you need to do when putting a foundation under a shed is to lift or move the shed. The smaller the shed, the easier this could be.
Whether you plan on using the entire space for your living quarters or want to include a large workshop, barndominium kits under the $100k frame...
Read More »
Peppermint Peppermint is a natural insect repellent that may effectively deter ants and other bugs, such as mosquitoes. To use peppermint essential...
Read More »
You’ve raised and secured your shed, now what? You need to excavate for a floating slab, a footing and foundation wall, or a small pad to rest deck blocks or piers on. For most sheds with attached floors, a foundation wall or deck blocks are adequate. A shed with no floor is more likely to need a slab to act as a floor. I helped another buddy with a floorless shed a couple of years ago. We were able to raise and level his 12’x24’ shed using bottle jacks. We set the jacks on concrete blocks lifting against 4“x4”s bolted to the walls. The 4”x4”s extended about a foot beyond the shed’s corners. Once raised, we put blocks under the 4”x4”s so we could release the bottle jacks and stabilize the structure. With the shed lifted, we were able to dig out under the walls, and then use a bobcat to excavate the rest. We formed up the perimeter, tamped gravel in, put plastic down as a barrier, then put in a rebar grid. With that done, we had ready mix concrete delivered and poured the floor. We smoothed the concrete, left his daughter’s footprints in the corner, and waited 48 hours for it to cure. Once cured, we rolled out sill gasket, put the bottle jacks in place, and lowered the shed onto its new foundation. Almost as easy as it sounds…and we had the permits. Here are two pro tips to assist you with planning your slab foundation: If you’re building a foundation wall for your shed, the process is similar to the slab. You have to raise the shed to create a level base. Here are a couple more pro tip videos to assist you: I’ve helped do this several times, most recently a 20’x30’ century-old cabin built on stone pillars. We used hydraulic jacks to lift and stabilize the structure. Using spades and picks, we dug out for the footing and block foundation walls. It took us a couple of months, but we were successful! And no, it wasn’t easy!
If the base is uneven, this can create small gaps around the edge of the shed where moisture can get through, causing damp issues. To waterproof...
Read More »
You will probably need a house that is around 400-500 sq. Feet, as this has enough room for you to live in, and forget you're in a small house....
Read More »
But, before you call the ghostbusters, know that there's usually a simple explanation for why your walls are making a knocking sound. Most often,...
Read More »
If you want the shed to be used for lawn care, it is best to place it in an easily accessible location that will open up to the rest of the yard....
Read More »