How do you seal gaps in a shed?

Check for gaps and fill them with expanding foam, builder's caulk, or by applying wooden splines. Fill gaps around doors by fitting draft excluder tape. Ideally, your door should have a threshold to stop the rain from blowing in under the bottom. If not, you may be able to improve the seal by fitting a weather bar.

waltons.co.uk - How to waterproof your shed – Waltons

Does a larger garage increase home value?

Typically, the ROI of a garage addition is sixty-four to eighty-one percent, adding an estimated $20,000 to $35,000 to your home's value.

Last updated May 22, 2019

Can my Neighbour grow ivy on my fence?

ANSWER: The ivy will belong to the neighbour as its roots appear to come from the neighbouring property. If the end-terrace wall is structurally...

Last updated Mar 26, 2022

Promotion

Water leaks are the enemy of sheds and their contents. Good planning and regular maintenance extend the life of your shed, and help protect the tools and equipment you store inside.

At a glance:

1. Build the right base

A paving slab base is both an attractive & durable shed platform

If your shed is in contact with the ground, it will get damp. That’s why it’s so important to make sure that, before you construct your shed, you build a wooden base for it to sit on, or lay a patio or concrete slab. A wooden base keeps your shed watertight by raising it off the ground, allowing air to circulate underneath. It should be made of pressure-treated or tanalised timber to help it withstand rot. While this is fine for small sheds sited on lawns where drainage isn’t a problem, larger sheds will require a more robust base. Installing a patio slab or a concrete base is a great solution for those who’re comfortable with fairly heavy-duty DIY. Consider adding a damp-proof membrane and, to ensure good airflow, do consider sitting your shed on a wooden base or floor bearers, on top of the concrete or patio.

2. Treat with wood preservative

A yearly coating of wood preservative will protect your shed from weathering for years to come. Even if you’ve bought a shed with a ten-year guarantee against rot, you still need to treat it with wood stain every year. That’s because, while the initial pressure treatment is extremely effective against fungus and insects, its strength weakens over time. To keep your shed in optimum condition, you need to top it up. When you position your shed, be sure to leave plenty of access room so that it's easy to maintain and apply wood treatment. It also ensures there’s good airflow around the building which helps keep it dry and damp-free. Use a quality water or spirit-based stain. Water-based stains are quick drying and contain far fewer volatile organic compounds than spirit-based products, although some say they’re trickier to apply. It’s certainly true that solvents make for a thinner, more spreadable fluid but they are somewhat slower to dry and far more toxic.

3. Check your doors and windows

How thick should a concrete slab be for a pole barn?

In an “ideal perfect world” a 3-1/2” nominal thickness floor would allow 92.57 square feet of area to be covered by a yard of concrete.

Last updated Jul 8, 2022

Does a deck increase home value?

Building a deck is a practical, reliable, and cost-effective way to increase your home value. Research shows that a homeowner can recoup over 75%...

Last updated Aug 29, 2022

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

Fill gaps around windows with expanding foam to prevent water finding its way in. Wooden window and door frames need regular attention to keep them in good condition. Over time, wood shrinks causing cracks and chinks to open up – space through which water may penetrate. Check for gaps and fill them with expanding foam, builder’s caulk, or by applying wooden splines. Fill gaps around doors by fitting draft excluder tape. Ideally, your door should have a threshold to stop the rain from blowing in under the bottom. If not, you may be able to improve the seal by fitting a weather bar. Check your window sills, frames and external doors for rot by probing the wood with a screwdriver. Dig out any soft patches and fill with a quality wood filler before sanding and repainting.

4. Clear gutters and maximise drainage

Gutter filters prevent leaves and debris from blocking your guttering and down pipes. It’s always best to control and direct runoff from your shed roof. You don’t want water to build up in puddles in case they cause flooding. Get up on your stepladder and make sure leaves and other debris aren’t blocking your guttering; if you don’t have gutters, consider installing them. By collecting rainwater into a butt, you can save it for watering the garden during dry spells. If drainage is a problem, you need to do something about it. Soggy ground and standing water make it very difficult to stop your shed suffering from damp. An easy way to ease drainage issues is by installing a French drain. Find the lowest-lying side of your shed and, angling your spade away from the building, dig a trench along the outside of the wall. Fill the hole with graded hardcore and chippings. Now surface runoff will drain into the hole rather than building up, and because the water is contained in rubble, rather than soggy soil, it’s faster to drain away and evaporate.

5. Make sure your roof is sound

Guttering helps you control water run-off from your shed

Does rotten wood burn good?

Can You Burn Rotten Firewood? You can - but it's not recommended. Rotten wood is not only less dense than solid wood, meaning it won't produce as...

Last updated Aug 30, 2020

What do you do with potting soil in the winter?

Any storage containers that will keep the soil dry will work, including bins, small garbage cans, or heavy-duty plastic bags. Exposure to freezing...

Last updated Apr 19, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Because shed roofs are commonly covered with felt which deteriorates over time, it’s vital to check for damage and wear every year. Pay particular attention to the ridge line and the edges of the roof, as well as any places where the material is nailed down. Felt is easily patched – all you need is some spare felt and gutter sealant to use as glue. Lift damaged shingles and spray the area underneath with sealant before applying a patch and pressing down firmly. Torn shingles may be repaired by spraying sealant on the lower surface of the rip, and pressing together. You may want to replace your roofing felt. If this is the case, switching like-for-like is probably the cheapest option. Alternatively, you could go for EPDM rubber sheeting, a durable and long-lasting solution.

6. Ventilate, ventilate, ventilate

Installing a static air vent on opposite shed gables will provide a healthy air flow. It doesn’t matter how watertight your shed is, damp days mean damp air, which, unless your shed is well ventilated, means a damp shed. You must at least install a pair of static vents with bug-proof mesh backing, on either side of the building – adequate airflow prevents moisture buildup. Also consider insulating your shed. When the temperature falls below the dew point, humidity condenses from the air, damaging tools and equipment. By stopping heat leaching from your shed, you’ll make that less likely to happen. Making sure your shed is fully waterproof helps keep all your tools and equipment safe, and ensures that the fabric of the building lasts as long as possible. Don’t wait until the weather deteriorates to do your annual maintenance – attack the job as soon as you can.

Lead image: Roomanald/Shutterstock

waltons.co.uk - How to waterproof your shed – Waltons

How much pitch do I need for a lean to?

To guarantee water drainage, a roof should have a slope of at least 1/8 inch per foot of horizontal run, but that's a bare minimum. A slope of 1/4...

Last updated Apr 25, 2018

What is the most important thing to check before anchoring?

The most critical factor while approaching anchoring position is the speed of the vessel. Engines must be ready and tested well in advance and the...

Last updated Dec 15, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How much does it cost to build a Barndominium in South Carolina?

For example, a traditional home in South Carolina costs around $350 per square foot. This figure will also only include the structure and not any...

Last updated Feb 18, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Can you heat an uninsulated barn?

You can heat an uninsulated pole barn using cost-effective heating machines that run on gas, propane, or electricity. The best options include wood...

Last updated Feb 23, 2019