Photo: Pixabay

How do you store long pieces of wood?

Here are a few ways to ensure that you store your wood properly: Put wood piles onto flat foundations. Place wood boards and the stickers in uniform stacks with boards of the same thickness. Align stickers vertically and lay them flat. Space the wood out to provide proper ventilation. More items... •

clp-inc.com - How To Store Lumber To Prevent Warping - Curtis Lumber & Plywood

Can you stop rust once it starts?

The good news is, corrosion of iron is preventable AND reversible. Using a rust converter paint on a rusting metal surface will stop the process of...

Last updated Jul 12, 2021

Why is epoxy coated rebar being banned?

A pinhole manufacturing defect or a scratch that may occur during handling or placement at a construction site will cause an epoxy coated rebar to...

Last updated Jul 18, 2020

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

As a construction worker, you work with wood all the time and have likely seen a bad piece or two. Although most wood will age well over a long period of time in the right conditions, lots of wood pieces could be ruined if they become warped due to poor storage conditions with excessive humidity or moisture. In order to wood waste, you must know how to store lumber to prevent warping. This could affect the project that you are working on, and if the wood is meant to be used for a building or structure, the warping could prove to be dangerous. However, if you know how to store lumber to prevent warping, then you can save time and money by keeping your wood safe to use and in great condition.

Definition of Warping

Wood that is warped is curved or bent in certain areas from the moisture content being different in specific areas of the wood. This causes some areas to dry faster than others and shrink in size, causing the wood to bend or curve. This will keep a board from laying flat.

Who it Affects

Although construction workers will see this with improperly kept wood, there are others who may be affected by warping. Manufacturers for Crown moldings, wood instruments, and furniture could all find warping in their wood. Also, homeowners who are building a structure or wooden shed for their homes could also be affected.

Causes and Types

The cause of warping in wood is from contact with moisture or humidity, which could be in the air due to weather conditions. This could also occur if the wood is kept in an area where it could get wet from rain dripping through cracks in the ceiling. There are different types of warping that could occur, and you should know each type and what it looks like.

The Five Types

Is an 8x8 shed big enough?

Categorized as a small shed, an 8'x8' storage shed is a size that will fit smaller yards, or if you have a larger property, you can place an 8×8...

Last updated May 15, 2021

Which is better blown in insulation or batting?

Generally, we don't recommend installing batts in the attic — blown insulation can fill the space better for more energy-efficient performance.

Last updated Feb 20, 2020

Promotion

Bow: The wood remains flat across the face but bends upward on both ends. The shape from the side resembles a bow. Twist or Wind: The wood turns at both ends inward creating a twisted shape. This often resembles a twisted ribbon. Kink: This occurs when the wood bends upward on one side creating a shape that looks like an arm that is bent at the elbow. Crook: This happens when only one edge of the wood is exposed to moisture. The shape looks like the letter C or a smile. Cup: This is when the edges of the wood both curve inward towards the middle of the piece of wood. The shape resembles a piece of paper in which the long edges have been curved towards the center.

Clean, Dry Storage

How you store your wood can have a big impact on the moisture content that it is exposed to, preventing warping from happening. Keeping a clean and dry storage area for your wood can prevent moisture from causing it to warp. Here are a few ways to ensure that you store your wood properly:

Put wood piles onto flat foundations

Place wood boards and the stickers in uniform stacks with boards of the same thickness

Align stickers vertically and lay them flat

Space the wood out to provide proper ventilation

Cover your wood with material that does not allow vapor into it to keep the wood dry in humid places

Put weights on wood piles to prevent cupping

Abiding by these rules and suggestions can keep your lumber from warping and ensure that your wood is all usable when it comes time to use it. It is important to remember to always check the moisture content before use.

Monitoring Moisture Content

Not only do you want to make sure that the area you are storing your wood in is free from moisture and humidity, but you also want to check the moisture content of the wood itself. Larger factories or manufacturers should have hygrometers in the storage area so you can keep track of the moisture in every area.

Measure Moisture Content of Wood

Is soundproofing worth the money?

Final Thoughts. With realistic expectations, soundproofing a home is without question worth the money. It helps with better sleep, fewer...

Last updated Jul 25, 2020

When should I plant my starter plants?

Get the timing right. The goal with seed starting is to have your seedlings ready to go outside when the weather is favorable. Start by looking at...

Last updated Aug 22, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

You should also have prong meters that will measure the moisture content of the wood itself from the surface to the interior. It’s important to have both readings because the moisture content can vary from the surface to the interior.

Proper Curing

Curing your wood can be another defense against warping, and if done right, it can increase the longevity of the wood. You want the wood to be completely dry before you store it. By following these simple instructions, you can prevent your wood from warping: Do not allow lumber that is drying to dry too slowly, which could allow moisture to stay long enough to cause warping

Keep drying lumber from being exposed to moisture or humidity

Do not cause cracks by over-drying wood

Optional, but Recommended

You could also choose to have the ends of the wood sealed to prevent them from warping, which happens faster than in other areas of the wood. This keeps the ends from warping by drying faster than the rest of the wood.

Work with Curtis Lumber to Ensure You’re Getting the Best

Do you need wholesale lumber for your next job, or do you want some advice from a professional about how to store lumber to prevent warping? Get in touch with Curtis Lumber and Plywood to ensure you will get the best wood possible and the best advice to prevent your wood from warping!

clp-inc.com - How To Store Lumber To Prevent Warping - Curtis Lumber & Plywood

How far can a wooden truss span?

A roof truss can span up to 80' without support, however in any home that distance would be impractical and incredibly costly. Trusses are designed...

Last updated May 19, 2020

How can I stop my shed getting damp?

How Do You Stop Dampness In A Shed? Insulate. Insulation not only makes your shed more energy efficient by reducing heat gain and loss, it also...

Last updated Jul 11, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Do plastic greenhouses work?

Well-designed, maximum-size mini plastic greenhouses work very well. They are considerably cheaper than traditional glass greenhouses. They provide...

Last updated Feb 13, 2021

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

How do you make a building friendly disabled?

Buildings should also have an accessible entrance. A common and easy solution is to install a ramp to the entrance to your building. Not only would...

Last updated Nov 23, 2021