How far apart are king studs?

mtcopeland.com - What are Jack and King Studs in Framing? - MT Copeland

Do you need to lay anything under gravel?

A good landscape fabric beneath a layer of pebbles or gravel goes a long way in preventing weed seed germination. Even the best landscape fabric...

Last updated Jul 19, 2018

How do you season firewood quickly?

6 Tips to Season Firewood Quickly Know the What Type of Wood You're Using. The type of wood you use matters. ... Prepare During the Right Time of...

Last updated Sep 9, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Framing

Email

All building construction relies on framing to support the dead load of the materials including windows, doors, roofing, and finishing components—as well as the live load of the building’s future occupants. That’s why its essential for carpenters to understand the role of each framing member. Some walls are load bearing, while others are not, but every common stud, plate, and header plays an important role in holding up a structure.

What are studs?

Close your eyes and envision a wall of your home without drywall. What you’re seeing is your house’s frame. Each vertical member running from floor-to-ceiling is called a wall stud. Studs are assembled during construction to be 16-inches or 24-inches apart, depending on local building code, and they’re assembled with a top plate along the ceiling, and a bottom plate that sits atop the floor joists and subfloor. Assembled flat and raised to stand upright, a wall with no windows or door openings would look like a simple rectangle with evenly spaced studs sandwiched between the upper and lower plate. When you frame a window or door into a wall and create an opening in the studs, a header and a framing stud on each side reinforce the opening. Headers and sill boards are used horizontally above and below a window or door to support its weight, but to the left and right of each opening, a jack stud and king stud are installed to support the top header and the ceiling plate.

What are jack studs?

When a wall needs to accommodate an opening, such as for a window opening or a doorway, the framing members need to be adapted to account for the loss of wall studs. That’s where jack studs come in. At the top of the opening, a horizontal board is installed as a header. Both ends of that header need to rest on a weight-bearing, vertical jack stud. A well-supported header transfers the load to the jack stud and guarantees that the framework can properly support the weight of the door or window. Local building codes require two-or-more jack studs when building an opening larger than five-feet wide. The number of jack studs used in framing is always directly related to the width of the opening, which then correlates to the dimensions and weight of the header. If a header is too small or lightweight, it risks bowing and compromising the window or door opening.

How do I keep weeds out of my gravel driveway?

How to Keep Weeds Away from Your Gravel Weed the area thoroughly yourself. Use garden fabric to keep weeds away. Use salt for your weed control....

Last updated May 25, 2022

How expensive to insulate a shed?

You should expect to pay anywhere between $300-900 to insulate your shed properly. May 9, 2022

Last updated Sep 16, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What’s the difference between a jack stud and a cripple stud?

While a jack stud is used to support the weight of the header, a cripple stud is cut to add additional framing above the door or window opening, and below a window. Though cripple studs are not load-bearing, they’re important parts of a building’s framing because they serve as blocks for other building materials, such as plywood or drywall, to attach.

What are king studs?

King studs run floor-to-ceiling, adjacent to and beyond the length of the jack stud, rather than supporting the header like a jack stud. They act more like a traditional wall stud, but usually fall out of the 16- to 24-inch spacing of normal studs. The purpose of the king stud is to support the top plate along the ceiling in the absence of evenly spaced wall studs, and provide reinforcement to the opening defined by the header, sill, and jack stud. Surprisingly, not all building codes require king studs around windows and doors, but contractors with several years experience under their belts understand the role that king studs play in construction. Even if they’re not required, most professionals know that their presence will make openings sturdier, and increase overall structural stability. MT Copeland offers video-based online classes that give you a foundation in construction fundamentals with real-world applications, like how house framing works. Classes include professionally produced videos taught by practicing craftspeople, and supplementary downloads like quizzes, blueprints, and other materials to help you master the skills.

mtcopeland.com - What are Jack and King Studs in Framing? - MT Copeland