Photo: Mihai Bența

How long should my ramp be for my shed?

For use by the general public many building codes recommend a maximum slope of 1:8 (that is one inch rise for every eight inches horizontally.) With a 1:8 slope, if the floor is nine inches above the ground, the ramp will be 72 inches long (1.83m long).

secrets-of-shed-building.com - How To Build A Storage Shed Ramp

Can you heat an uninsulated shed?

An uninsulated shed, whether it's a studio, workshop or potting station, can be an unpleasant place in which to work when it's chilly outside....

Last updated Jun 4, 2019

Which shed is best plastic wood or metal?

Plastic shed kits are less expensive than their wooden counterparts, but can be more expensive than basic metal shed kits. While plastic sheds are...

Last updated Apr 18, 2022

Promotion

How To Build A Shed Ramp

A shed ramp is essential when you need to get heavy garden machinery in and out of the shed. A typical shed floor can be 9"-12" above the surrounding ground level, so some people even use a ramp for getting bicycles in and out. This article gives a few ramp design hints as well as tips on how to build a timber ramp for a shed.

Choosing the ramp slope

As part of your shed planning you should make sure that there is sufficient space in front of the shed for the access ramp. The length of the ramp will be governed by the height from the external ground level to the shed floor and the slope that you choose. A little bit of thought needs to go into the slope, for two reasons - safety and ease of use.

Safety

The steeper the slope, the easier it is to slip or trip. It most likely won't be you (as you built it and know its pitfalls) but one of your loved ones will. So 'listen up'. The steepest slope for a public ramp is one in twelve (1:12) which is governed by ease of use for wheelchair users. For use by the general public many building codes recommend a maximum slope of 1:8 (that is one inch rise for every eight inches horizontally.) With a 1:8 slope, if the floor is nine inches above the ground, the ramp will be 72 inches long (1.83m long). It is possible to go steeper, up to about 1:4 for fit able-bodied people if you want to, however do remember the increased risk of slipping. My recommendation is to make the slope as shallow as possible, this will avoid many safety and practical and access problems.

Ease of use

The other factor to remember is the geometry of the machinery you are to use. If you are using a ride-on lawnmower or garden tractor they will have plenty of power to get up the ramp but you need to consider if the machine will ground in the middle as the undercarriage of the mower goes over the door threshold. If you are using a snow plough, the blade may run into the ramp before the wheels if the slope is too steep! To determine the critical slope check in the machinery manual or do some site experiments. Make the garden shed ramp at least six inches wider than your door opening on both sides. This gives a bit of tolerance in going in and out, use this space to fix a kerb to the ramp (stops the mower sliding off).

Are there any Etsy millionaires?

A WOMAN has revealed the life changing moment she became a millionaire overnight after starting an Etsy company with just £80 to her name. Sep 24,...

Last updated Feb 5, 2019

Is it cheaper to build a barn or buy a kit?

The Perks of Building A Shed If you've been wondering is it cheaper to build your own shed, you'll discover that yes, it is less expensive to build...

Last updated Aug 10, 2021

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Ramp surface

A wooden shed ramp will become slippery over time as it gets wet and algae grows. The slip or skid resistance of the ramp surface can be improved in a number of ways: One option is anti-slip paint (see your local DIY store). The specialist paints are formulated with grit sizes and paint that work. The homegrown version of this is to use exterior grade paint and sprinkle on some coarse sand. The other option is to use a roll of galvanised chicken wire or expanded metal sheet and staple this down to the ramp surface using galvanised staples.

Make a concrete ramp with a tamped finish

Build a ramp for a shed

When it comes to the construction, the choice is a wooden ramp or concrete.The ramp should be founded on crushed stone as described here Shed Foundations

Concrete

A concrete ramp may be considered a bit of overkill (but as always the most durable solution). Use a tamped finish in a herringbone type fashion, so that water can drain from the surface and the ridges give slip resistance for the tyres.