How much does it cost to add a toilet to a shed?

Cost to Install Plumbing in a Shed or Garage by Fixture Costs are similar for bathroom sinks, kitchen sinks, and "wet bar" sinks. Toilet: Installing a new toilet will cost between $250 and $550, or about $400 on average.

angi.com - How Much Does It Cost to Add Plumbing to a Detached Garage?

What is the strongest concrete in the world?

PFC is an ultra-high-strength concrete whose properties can be further enhanced by incorporating steel fibers. The way in which PFC is prepared...

Last updated May 9, 2022

What size rough opening do I need for a 9x7 garage door?

As a general rule the rough opening should be the exact same size as the door you intend to install. A common single car door size of 9ft wide by...

Last updated Sep 24, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Highlights You’ll pay around $900 on average to add plumbing to an exterior building. The distance from your house to your shed or garage is the biggest cost factor when connecting plumbing. Your home’s location will determine how much piping you’ll need, but you get to choose the piping material you want.

Plumbers tend to charge per fixture when hooking up plumbing.

It may also be necessary to hire an electrician or carpenter to get your new plumbing plan set up. Get quotes from up to 3 pros ! Enter a zip below and get matched to top-rated pros near you. Find pros Adding plumbing to a detached garage or shed roughly 20 feet away from home will cost $1,100 for the average homeowner. Homeowners pay between $900 and $1,300 just to run the lines when adding plumbing to detached garages and sheds. Costs are generally the same whether you're renovating or building a new garage or shed. Adding special plumbing features like hot tubs, saunas, or wet bars will increase the price to get this project done. Cost to Install Plumbing to a Detached Garage or Shed 20 Feet From Your Home:

High Average Low $1,300 $900 $1,100

Piping is the largest material cost associated with adding plumbing to a detached garage or shed. Depending on the materials you choose, you’ll pay between $0.40 to $2 per linear foot for new plumbing. Your most popular options include CPVC and PEX.

Chlorinated Polyvinylchloride Piping (CPVC)

Priced at between $0.50 and $1 per linear foot, CPVC is an inexpensive, rigid option that won't corrode. While the lifespan of CPVC is between 50 and 75 years, this material has a slightly higher potential for leaks. Homeowners extending piping 20 feet can expect to pay an average of $15 per foot when using CPVC.

Polyethylene (PEX) Piping

Costing between PEX pipe $0.40 and $2 per linear foot, PEX is flexible piping that doesn't rust, leak, or burst. PEX piping can last up to 100 years. The average cost is $24 for 20 feet. There are multiple steps involved with preparation and installation when hooking up plumbing to a garage or shed.

Labor

A local plumber will typically charge between $45 and $200 per hour. An electrician near you will charge between $50 and $100 per hour.

Excavation

Paying for trenching to lay down new plumbing pipes costs $800 per 100 linear feet. Expect the cost for a 20-foot trench to fall between $200 and $300.

Connecting the Water Lines

You'll likely get an all-inclusive quote for the cost to hire a plumber to install new plumbing in a garage or shed. The average hourly cost for a plumber around the country is $330. While replumbing an entire home takes anywhere from two days to a full week of labor, plumbing a shed or garage might only take one to three days. Factors that will impact price include:

Should I put plastic under shed?

Do I need a vapor barrier in my shed? A shed without heat and air-conditioning does not need to have a moisture barrier as it will cause...

Last updated Mar 28, 2019

What kind of plywood should I use for a shed floor?

pressure-treated plywood Ordinary exterior-grade plywood is made with weather-resistant glue, but the wood itself is not particularly rot...

Last updated Oct 3, 2022

Promotion

Type of pipes

Number of fixtures

Piping type

Electrical Work

Even if your garage already has electricity, you may still need to budget in the cost to run electricity to a garage to attach plumbing fixtures and appliances (like installing a hot tub and sauna as part of your glamorous revamp). While electricians charge an average of $50 to $100 per hour, expect to pay anywhere from $300 to $800 for a full day of work based on the scope of your project.

Rough and Finish Work

It's likely that you'll need to cut some holes to get pipes installed in an existing garage or shed. It's sometimes necessary to demolish existing walls to add water lines. In this case, you'll need to pay for both wall demolishment and new wall installation. The average hourly rate for a carpenter is between $35 and $100 per hour.

Permits and Building Requirements

Expect to pay anywhere from $100 to $300 for every permit needed. The number of permits needed will vary based on local requirements. In some cases, you must add windows to any structures will toilets, sinks, showers, or other plumbing features. Adding a new window to an existing garage or shed can cost anywhere from $1,500 to $5,000 with labor and parts.

Cost to Install Plumbing in a Shed or Garage by Fixture

Running lines isn't the only cost associated with getting the water running in your backyard oasis with help from plumbers near you . You'll also pay for plumbing services for every fixture you install. Sink: Getting a sink with a drain installed in your newly renovated space will cost $300 to $1,100 , or an average of $700 . Costs are similar for bathroom sinks, kitchen sinks, and "wet bar" sinks. Toilet: Installing a new toilet will cost between $250 and $550 , or about $400 on average . Bathtub: Hooking up a new tub can cost $200 to $1,000 , or $600 on average without including the cost of the tub unit. This cost does include the typical $97 per drain that plumbers charge for drain installation. Shower: A shower installation will cost an average of $700 in addition to the cost of the unit, or a range of $400 to $1,000 . Showers with waterfall features, multiple showerheads, or other special touches that require additional plumbing cost more. Sauna: While sauna units can easily cost $10,000 on their own, you'll need to factor in at least another $1,000 in labor costs to have your sauna professionally installed by a plumber. Hot tub: Getting your new hot tub installed can cost $150 to $5,000. The big factor determining the cost of installing a hot tub is whether it’s an above-ground or in-ground unit. In-ground units cost more to install because of excavation.

How tall should my shed be?

The best shed wall height is 8'-1 1/8”. It is an easy construct using readily available precut dimension lumber and sheathing. Minimal cuts, cost,...

Last updated Jul 28, 2018

What happens if you do something without planning permission?

However, people who do not get the necessary planning permission for something they are doing risk the possibility of serious consequences from...

Last updated Dec 14, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

New Plumbing in Detached Garage or Shed Cost Factors

Costs for attaching plumbing to a detached shed or garage vary wildly because each property layout is dramatically different. The major factors influencing price are usually out of the homeowner's control.

Distance Between the Home and Detached Building

The distance that your new piping will need to travel is the single biggest factor in determining the cost of your project. You could easily pay ten times more if you want to hook up an outcropping on a far part of the yard.

Size of the Building

For example, a bigger shed or garage will warrant more outlets and water pressure you need.

Number of Fixtures Connected

You'll pay per fixture when it comes to installation and hookup costs.

Location of the Pipes

Underground pipes will cost more to install, as will pipes within the walls.

Cost of Materials

The price per square foot of piping that you choose influences total project costs. For instance, copper is more expensive than PEX. Unless you have a background in plumbing or construction, you should consider working with licensed pros when adding plumbing to detached garages or sheds. Laying piping from scratch isn't generally considered a DIY project.

FAQs

Can you put a toilet in a garage?

While adding a toilet to a garage is challenging, it is possible. If your garage has a concrete pad, it's necessary to break through the concrete to install pipes. Another option is to create raised platforms for the toilet, shower, and sink to allow waste pipes to run through your wall before routing underground.

How do you create drainage when adding a bathroom to a sunken garage?

Gravity can make it difficult to make plumbing work in a garage if your plumbing is lower than your drainage point. Plumbers will generally recommend using an upflush system that discharges into a pump from the back of the toilet.

Do you have to pay property taxes on a shed with plumbing?

While tax assessments vary around the country, a shed that connects to water or electrical services is likely to be assessed for property taxes.

angi.com - How Much Does It Cost to Add Plumbing to a Detached Garage?

Do I need vapor barrier in unheated garage?

The majority seem to agree that insulated, unheated garages, should be allowed to breathe. If the garage is heated, you will need a vapor barrier,...

Last updated Sep 19, 2018

How do I keep moisture out of my Barndominium?

Use a properly sized dehumidifier, to reduce humidity. Excessive indoor humidity and moisture are not a result of your windows. You should view the...

Last updated Oct 1, 2018