Photo: Disha Sheta

How much weight can plastic drywall anchors hold?

They typically support anywhere from 30 to 85 pounds per fastener. These self-drilling screw-in plastic drywall anchors are made from nylon. If you use them correctly, they work really well.

protoolreviews.com - Using Self-Drilling Plastic Drywall Anchors - Pro Tool Reviews

Can you turn a shed into a tiny house?

Q: Can You Build a Tiny House out of a Shed? The short answer to this first question is “yes.” Plenty of people have already built their tiny...

Last updated Aug 22, 2018

Does plastic stop cold air?

Keeping Cold Air Out The plastic film is also an insulating film. When correctly installed over the face of the window, it blocks cold air from...

Last updated Apr 2, 2021

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

There are many times you need to hang a picture or decorative piece on a wall, but can’t necessarily locate a stud. Instead of banging your head against the wall (this never works, only makes big holes), we’ll usually reach for self-drilling plastic drywall anchors. They hold a lot of weight, and they install easier than just about any other type of anchor.

The Many Names of Self-drilling Plastic Drywall Anchors

Self-drilling plastic drywall anchors go by a variety of brand names. You’ve got E-Z Ancor, Toggler, Hillman—even Hilti makes these. These drywall anchors are extremely versatile and come in many different configurations—from light duty to heavy duty. This makes them applicable for almost any use. They typically support anywhere from 30 to 85 pounds per fastener. These self-drilling screw-in plastic drywall anchors are made from nylon. If you use them correctly, they work really well.

Installation

Using a screwdriver—we do not recommend the use of a drill—you can screw these fasteners into drywall without pre-drilling. Watch out, though. If you have a heavily-painted wall, you want to “break” the surface first before screwing in the plastic anchor. Skip this step, and you might break off the tip. We recommend taking your Phillips screwdriver and simply gouging a small starter divot right where you want to screw in the anchor. This starts the tip of the plastic self-drilling drywall anchor in the drywall instead of allowing it to skip across the painted surface. Once the face of the drywall anchor is flush with the surface of the wall, add the included machine-threaded screw into the fastener. This parts the flanges, securing it within the wall so it can’t easily pull out. We’ve used plenty of the light- and medium-duty fasteners to secure pictures and even to hold up heavier items like loudspeakers and small shelves. In addition, they can be backed out by hand using a simple Philips head screwdriver.

Self-Drilling Plastic Drywall Anchors

The use of a self-drilling plastic drywall anchor can replace typical plastic plugs, which are not nearly as reliable and require pre-drilling. They also surpass the use of toggle bolts for low weight applications. Those leave a large hole and also require pre-drilling. The deep thread design provides a sufficiently strong attachment to gypsum/drywall of nearly any size, including 3/8″, 1/2″ and 5/8″. They will even work in most double drywall situations. Since the anchors are available in corrosion-resistant zinc and non-conductive white nylon, they can be used in almost any application. Plastic drywall anchors are typically sold in packs of 10, 25, or 50. If you’ve never used these products, you owe it to yourself to check them out. They will save time and energy and are worth every penny.

How heavy should my anchor be?

As a general rule, a holding power of 90 pounds is sufficient for safely anchoring a 20' boat in winds up to 20 mph. For the same wind speed a...

Last updated Apr 6, 2019

What can't you do with a table saw?

7 Cuts Not To Use a Table Saw For Don't cut PVC pipe. Don't make curved cuts. Don't make backwards cuts. Don't cut ferrous metals, like cast iron...

Last updated Mar 6, 2019

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Why do floating shelves sag?

These shelves are mostly hanged on drywall with screws anchored into the drywall which attaches to the holes in the shelves. When heavy things are placed on these shelves, it creates enormous stress on those tiny screws eventually making them move. The plugs become loose which causes the shelf to sag.

ifixit.com - How to Fix Sagging IKEA Lack Shelves - iFixit Repair Guide

In this guide, we look at how to fix a sagging Ikea floating shelf. The Ikea Lack shelf is prone to sagging for its floating design. These shelves are mostly hanged on drywall with screws anchored into the drywall which attaches to the holes in the shelves. When heavy things are placed on these shelves, it creates enormous stress on those tiny screws eventually making them move. The plugs become loose which causes the shelf to sag. This guide shows a simple procedure of replacing the screws and wall plugs and some techniques that will help secure the screws firmly in place. Following this guide should prevent sagging in the future.