Photo: David Bartus

How much will a 5 ton gravel driveway cover?

Understanding Size and Coverage Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

albornsupply.com - Calculating Gravel Amounts for your Driveway - Alborn Supply

How can I heat a large room cheaply?

10 Cheap Ways To Heat A Room Use A Small Space Heater. GiveBest Portable Electric Space Heater. ... Try Insulated Curtains. ... Apply Heat Under...

Last updated May 5, 2019

Can you build a shed next to a fence?

In order to avoid potential buildup of mold, mildew, and rot growth, it is advised that you should leave space between a fence and a shed. This...

Last updated May 8, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Calculating Gravel Amounts for Your Driveway

Calculating Gravel

When estimating the amount of gravel you need to cover your driveway, your estimate will depend on the type of gravel you choose, like pea or crushed gravel. Different grades are found in particles from fine to course, ranging from 2-64 mm. The volume of gravel must also be calculated according to the size of the rocks. Choose the gravel you'd like to use before digging the depth of your driveway, and then figure out how much you will need by using these simple calculations tips.

Understanding Size and Coverage

Gravel should be a minimum of 4-inches deep. The smaller the gravel, the more even the coverage will be. If rocks are on the larger side, allow for an additional 1/2 inch. Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

Measuring the Driveway

To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

Working With Gravel

When working with gravel for a driveway, calculate the measurements for an underlay separately. A road base is good for a bottom layer, while decorative gravel is best overlaid the road base. Using 2 inches of road base overlaid with 2 inches of gravel will greatly reduce your costs. Now, you're ready to build your gravel driveway.

View Original Article

Click Here

How do I build a shed door that won't warp?

(1) Three horizontal planks or ledges hold the planks together and provide backing to hinges. (2) Adding a diagonal brace between the ledges from...

Last updated Dec 13, 2018

What is a Barndominium vs Shouse?

While barndominiums were originally barns converted into homes, shouses are often standard single-family homes with an attached workshop. However,...

Last updated Apr 19, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Is gravel easily eroded?

Sloped gravel driveways are particularly susceptible to erosion. Over time, draining rainwater or snowmelt can deteriorate gravel driveways.

checkers.justrite.com - Erosion Control for Sloped Gravel Driveways - Checkers-Safety - Justrite

GeoGrid Ground Cellular System. The GeoGrid Ground Cellular System from Checkers is designed to provide long-lasting ground reinforcement and stabilization in a variety of residential and recreational applications. This ground reinforcement system features a high-density polyethylene construction that is both flexible and durable. The modular interlocking design of this system also allows for fast and easy installation. Once the GeoGrid system is installed, the individual cells can be filled with a wide range of aggregate or decorative stones to create reliable ground reinforcement in areas prone to erosion. The GeoGrid system can also be seeded with grass in order to create an environmentally friendly ground stabilization system that promotes natural drainage in flood-prone areas. The load-bearing capacity of the standard GeoGrid system is roughly 350 tons, and the premium GeoGrid option can support up to 500 tons. Optional demarcation blocks that incorporate a high-visibility design also indicate specific zones, such as parking areas or the direction of traffic flow. For sloped gravel driveways prone to erosion, the GeoGrid system is an innovative solution that provides erosion control and sustainable drainage. In addition to gravel driveways and parking lots, this system is ideal for car parks, equestrian areas, fire and emergency routes, and golf cart paths.