How thick should a slab be for a Barndominium?

Slab Thickness Your floor should be a minimum of 4″ thick. The concrete's strength should be a minimum of 2500 psi, with fiber mesh reinforcement added at the batch plant OR #3 rebar on 24” centers.

absoluterv.com - Concrete & Foundation Requirements for Barndominiums and Kit Homes

How do you drive snakes away from your house?

Take as many steps to deprive snakes of cover in your home as possible. Cut the grass short, clear bushes around your house. ... Inspect your home,...

Last updated Nov 3, 2018

Is plywood good for a shed?

Shed floors are best done with plywood. The wood of normal exterior plywood is not particularly resistant to rot, as it is glued with weather-...

Last updated Mar 28, 2022

Promotion

Absolute Steel barndominiums and kit homes are designed to be anchored to a concrete footing or slab. While technically, our buildings can be installed on bare earth, because someone will be living in the barndominium or kit home local building codes will apply. Those building codes will require a concrete footing or slab. SPECIAL NOTE FOR COLD WEATHER AREAS: The concrete applications described below do not account for frost line requirements. If you live in an area that has very cold winters and a frost line, your concrete footings will need to be deeper than what is illustrated here. Your local building authorities can provide information on frost line requirements in your area.

Concrete Slab Mounting

NOTE: ALWAYS check with your local building department for concrete requirements. We can supply engineered plans if you need. The information below is for general reference only and may not relate to your specific location.

Slab Sizing

Your slab is to be the same width as your building, and 2″ longer. For example, if you have purchased a 20′ wide by 40′ long building, your slab should be 20′ wide by 40′ 2″ long.

Slab Thickness

Your floor should be a minimum of 4″ thick. The concrete’s strength should be a minimum of 2500 psi, with fiber mesh reinforcement added at the batch plant OR #3 rebar on 24” centers. If you are planning to park large, heavy vehicles inside (such as trucks or larger RVs), you should consider making the slab 6″ thick, and using 4000-psi concrete. You may not need this for a kit home, but often times a barndominium may be used to store vehicles and heavy equipment. Be sure to saw-cut expansion joints in the slab, within an appropriate time after the pour, or troweled-in expansion joints done during the concrete finishing steps. For the sake of estimation, we can tell you that in our local area (Phoenix, AZ), the cost for a 4″ slab runs about $4.50 per square foot. Prices in your area may be different.

Footing Requirements

At the same time as your slab is poured, you will also need to pour perimeter footings, as illustrated below. This is called a monolithic pour or monolithic slab. Perimeter footings should be 12″ wide, and 12″ deep. (Deeper in the event you are contending with a frost line) You can include the 4″ slab thickness in the 12″ total depth; in other words, the footing would extend 8″ below the slab. As shown in the detail drawings, your footings will also need continuous runs of #4 rebar along the top and bottom. In our local area, footings of this type would cost approximately $16.50 per lineal (running) foot.

Please call us toll-free at 1-877-833-3237

with any questions or quote needs! We are here to help.

Customer service and pricing available from 8:00 am to 5:00 pm Arizona time Monday – Friday.

Will mothballs keep mice out?

Mothballs are meant to kill moths, eggs and larvae, but are also used to keep rats, mice and squirrels away. Those containing paradichlorobenzene...

Last updated Aug 10, 2020

How thick should plywood be for a shed wall?

You'll find one-half in. thick plywood works well for wall and roof sheathing, but use at least five-eighths in. plywood for your shed floor....

Last updated Jul 21, 2019

Promotion

What is a skilled carpenter called?

Carpenters and Joiners. Carpenters and Joiners are an integral part of the construction industry. They are highly skilled and committed to...

Last updated Feb 12, 2019

How many people should be in a workshop?

Most workshops have several features in common: They're generally small, usually from 6 to 15 participants, allowing everyone some personal...

Last updated Oct 1, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How much is a 15x15 concrete slab?

Concrete Slab Prices By Size Slab Size Square Feet Average Cost Installed 12x12 144 $888 15x15 225 $1,388 20x20 400 $2,468 24x24 576 $3,554 6 more...

Last updated Jun 21, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Will prices ever come back down?

“Projected inflation levels over the next five years range from 2.3%-2.9%, so prices shouldn't stay elevated as they are indefinitely,” Rosen said....

Last updated Mar 14, 2018