Photo: Kelly

How wide do ramps need to be?

36 inches wide ADA Ramp Specifications Ramps must be a minimum of 36 inches wide. Some areas require wider ramps. All edges must be protected to keep anyone from slipping off. All ramps shall have top and bottom landings as wide as the ramp itself and at least 60 inches long.

thebalancesmb.com - ADA Wheelchair Ramp Requirements - The Balance Small Business

What is the cheapest fuel to heat with?

Natural Gas Yes or No to Natural Gas Natural gas tends to be the most affordable of these options, with the federal Energy Information...

Last updated Sep 2, 2018

How long does a pole barn last?

40-60 years In fact, it is possible that with the proper care, pole barns could last upwards of 100 years. Many builders and experts cite 40-60...

Last updated Mar 31, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Many new building projects must have a handicap ramp, or wheelchair ramp, that meets the minimum requirements of the Americans with Disabilities Act (ADA). These ramps provide safe access to users with wheelchairs or walkers and are also helpful for people with strollers. The primary ADA guidelines for ramps involve the ramp slope and length, landing size and placement, and handrail construction. In addition to ADA requirements, the local building code may impose additional or substitute requirements that must be followed in the given jurisdiction.

Ramps may have a maximum slope of 1:12.

Ramps must be a minimum of 36 inches wide. Some areas require wider ramps.

All edges must be protected to keep anyone from slipping off.

All ramps shall have top and bottom landings as wide as the ramp itself and at least 60 inches long.

Landing size must be at least five feet square.

Ramps must have handrails on both sides if their rise is greater than 6 inches or their length is greater than 72 inches. Cross slopes (areas where a ramp slopes sideways, perpendicular to the ramp's length) must be less than 1:50, and surfaces must be slip-resistant and stable. A level landing is required at the bottom and top of the ramp. Maximum threshold height (at building entry) is 3/4 inch (19 mm) for exterior sliding doors and 1/2 inch (13 mm) for other types of doors without modification. When a handicap ramp has a rise greater than six inches or a horizontal projection greater than 72 inches, the ramp must have handrails on both sides. However, handrails are not required on curb ramps. Specific guidelines for ADA-compliant ramps include: The ramp must have handrails on both sides of all ramp segments. The inside handrail on switchbacks shall always be continuous. When a handrail is not continuous, handrails shall extend at least 12 inches beyond the top and bottom segment and must be parallel with the floor and/or ground surface. A clear space of 1 1/2 inches must be provided between the handrail and the wall where the handrail is installed. When the handrail is located in a recess, it must be at least three inches deep and shall extend at least 18 inches above the top of the rail.

Surfaces of the handrail shall be continuous without interruption or obstructions.

The top of the handrail surface shall be placed between 34 and 38 inches above the ramp's finished floor surface. The diameter of the gripping surface of the handrail shall be 1 1/4 to 1 1/2 inches, or the shape shall provide an equivalent surface. The handrail shall be free of any sharp or abrasive elements. Edges shall have a minimum radius of 1/8 inch.

Recommended Ramp Slope

While the maximum slope allowed by ADA guidelines is 1:12, the ADA recommends a more gradual slope of 1:16 to 1:20, whenever possible. A 1:12 ratio is too steep for some people to navigate, and a lower slope may be required for some public buildings. Depending on the slope and the material used to build the ramp, the surface may need some extra anti-slip texture to help prevent slipping.

Is there a difference between concrete block and cinder block?

Consequently, cinder blocks are much lighter in weight than concrete blocks. Cinder blocks are hollow rectangle-shaped structures usually made of...

Last updated Jan 28, 2020

How much firewood do I need for 4 nights?

In general, you'll find that you need between 2 and 5 bundles of firewood per day for your campfire. However, you may need more wood if you plan to...

Last updated Sep 18, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How do you calculate inclined length?

The slope length is calculated using the Pythagorean Theorem, where the vertical distance is the rise and the horizontal distance is the run: rise2 + run2 = slope length2.

campbellsci.com - How is slope length calculated? - Campbell Scientific

How is slope length calculated?

The slope length is calculated using the Pythagorean Theorem, where the vertical distance is the rise and the horizontal distance is the run: rise2 + run2 = slope length2. Example: If a water sampler was placed at a vertical distance of 10 feet and a horizontal distance of 20 feet from a water source, the equation would be solved like this:

102 + 202 = slope length2

100 + 400 = slope length2

500 = slope length2

√500 = slope length

≈22.36 feet = slope length

In this example, the facility would need more than 22 feet of tubing to cover the distance from the water sampler to the water source. Note: A minimum tubing length of 25 feet is recommended for a vacuum pump sampler.

Is OSB OK in the rain?

Can OSB Board Get Wet? Oriented strand board is water-resistant and will withstand 3 to 4 weeks of moisture during normal construction delays. Some...

Last updated Feb 28, 2021