DIY Builds
Photo by Javon Swaby Pexels Logo Photo: Javon Swaby

How wide should a mini ramp be?

A nice size would be 3-4 feet high, 20 feet in length, and 8 feet wide.

pacificboarder.com - How Not To Build A Miniramp | Pacific Boarder - Snow, Skate, Surf
Where do mice hide during the day?
Where do mice hide during the day?

During the day, mice sleep hidden away in their nests typically made of soft materials. Nesting materials could include shredded paper, cardboard...

Read More »
Last updated Jul 10, 2019
What time of year is best to replace roof?
What time of year is best to replace roof?

Fall Fall is the universal go-to season for roof replacement. With spring's mild temperatures and early summer's weather consistency, fall is...

Read More »
Last updated Jul 25, 2021
Are shed plans easy to follow?
Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »
Promotion

This spring, my roommates and I set out to build our first mini ramp. We spent some time researching different DIY plans, watching youtube videos, and talking about what we wanted for a ramp. We built it over the course of a week, working on it for a couple hours every couple of days and spent roughly $500. The consensus among the build crew is we did it cheaply and ended up with a solid product! I will be the first to admit though that some corners were definitely cut. Here’s what we did, how we did it, and some recommendations for building your very own front-yard mini!

STEP 1 – PRE-BUILD:

First, you’ll have to decide where you want to build it and how big you want it to be. Some factors to consider are: THE SIZE OF THE AREA YOU HAVE TO WORK WITH HOW MUCH WOOD YOU HAVE AT YOUR DISPOSAL HOW MUCH YOU WANT TO SPEND ON MATERIALS YOUR ABILITY LEVEL (IS THIS A DIY FOR YOUR KIDS?)

FINAL MINI RAMP SPECS

Slightly under two feet (1’10”) high, 16 feet long, 8 feet wide. Which is small. This allowed us to use one sheet of ¾” plywood for all 4 sides of the ramp, with 4 pieces of 3/8” ply topped with 4 pieces of 1/8” ply for the surface. This also made for a nice fit in our front yard.

RECOMMENDED

Find a spot that’s as flat as possible and the rest is up to you. A nice size would be 3-4 feet high, 20 feet in length, and 8 feet wide. This would end up costing you a bit more, but would likely be worth it if you’ve got the space.

STEP 2 – SUPPLIES

We got to know the guys at the hardware store by our place pretty well. We weren’t sure exactly how much material we needed, so we had to go back a couple times to grab the stuff we were missing.

OUR SUPPLIES

1 X 3/4" THICK PLYWOOD

4’X8’ 4 X 3/8” THICK PLYWOOD

4’X8’ 4 X 1/8” THICK PLYWOOD

4’X8’ 25 X 8’ LONG

2”X4” 2 X 8’ LONG 2” DIAMETER PVC

4 X 3/4" PLYWOOD

2’X4’ A LOT OF SCREWS – 1 ½” IS A GOOD LENGTH

1 DRILL

1 JIG SAW

1 TAPE MEASURE

1 PENCIL

1 IPHONE LEVEL

1 HAMMER

RECOMMENDED

This is pretty much the bare minimum supplies you’re going to need. We pulled it off using this stuff and didn't waste a whole lot of material. It’d be nice to have an actual sawhorse, a square, and a real level, but this is pretty much all you'll need! We'll get to the different options for materials later.

STEP 3 – THE BUILD: MAKING THE TRANSITION

Super important for the way the ramp feels and what type of plywood sheeting you use to cover it. Like I said, we used 1 sheet of ¾ plywood for our transition templates because we went for a smaller, more compact mini and well, we’re cheap.

WHAT WE DID

START BY MEASURING AND DRAWING YOUR TRANSITION. THIS IS ONE OF THE MORE DIFFICULT PARTS OF THE PROCESS. TO DO IT OUR WAY DRAW A LINE DOWN THE CENTER OF THE PLYWOOD SHEET AND MAKE THE CUT. THIS WILL MAKE IT EASIER TO CUT THE REST. WE GAVE OURSELVES A PLATFORM OF TWO FEET. YOU’LL WANT TO MARK THAT SPOT. NEXT, DRAW A LINE ACROSS THE BOTTOM TO REPRESENT THE BASE, OR FLAT PART, OF THE RAMP. THIS WILL NEED TO BE AS TALL AS A 2X4 SO THAT THE FRAME CAN PROP THE BOTTOM. WE OPTED TO LAY OUR 2X4’S FLAT, SO WE DREW THIS LINE 2” FROM THE EDGE. THIRDLY, DRAW THE CURVED LINE THAT YOU’LL CUT TO MAKE THE TRANSITION. TO DO THIS, USE SOMETHING LONG AND STRAIGHT TO CREATE A RADIUS. WE USED OUR TAPE MEASURE. MORE OR LESS BY TRIAL AND ERROR, WE FOUND A CENTER POINT FOR A RADIUS THAT WHEN PIVOTED, CREATED A CURVE THAT JOINED THE PLATFORM LEDGE WITH A SMOOTH TRANSITION TO FLAT. USING THIS APPARATUS, WE WERE ABLE TO DRAW OUR TRANSITION. USING OUR JIG SAW AND SOME 2X4’S AS MAKESHIFT SAWHORSES, IT WAS FAIRLY EASY TO CUT THE 4 PIECES. THINGS ARE STARTING TO LOOK LIKE A MINIRAMP.

YES, THIS IS JUST AS UNPROFESSIONAL AS IT LOOKS

How do you know if your breathing in mold?
How do you know if your breathing in mold?

Signs and symptoms of allergic rhinitis caused by a mold allergy can include: Sneezing. Runny or stuffy nose. Cough and postnasal drip. Itchy eyes,...

Read More »
Last updated Sep 2, 2019
Do you pay council tax on woodland?
Do you pay council tax on woodland?

Generally the answer is no, there are no annual charges: woodlands do not attract council tax or business rates or any other similar charge.

Read More »
Last updated Oct 3, 2019
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion

RECOMMENDED

IF WE WERE TO DO IT AGAIN, WE ALL AGREED THAT WE WOULD MAKE IT BIGGER. 3 FEET IN HEIGHT WOULD BE A SWEET SIZE, EVEN FOR OUR YARD. WE FEEL LIKE OURS IS PRETTY QUICK. IT ALSO MAKES IT A LOT HARDER TO BEND THE PLYWOOD INTO PLACE, ESPECIALLY IF YOU'RE USING 3/8" PLYWOOD.

STEP 4 - THE BUILD: FRAMING

This is an exciting part of the process. This is when you start to see the structure coming together!

WHAT WE DID

STARTING WITH THE THREE CORNERS OF THE TRANSITION (SO WE COULD GET THE STRUCTURE IN PLACE), WE LAID THE 2X4’S FLAT AT THE BOTTOM TO GIVE THE RAMP A BIT OF THE EXTRA HEIGHT. WE ATTACHED ONE EVERY FOOT UNTIL WE GOT TO THE CURVE OF THE TRANSITION, WHERE WE PUT ONE ABOUT EVERY 8 INCHES. THIS WAS EYEBALLED SO THAT WE COULD KEEP IT MORE OR LESS CONSISTENT. SINCE WE WERE STILL PRETTY PERPLEXED ABOUT HOW WE WERE GOING TO PUT THE COPING ON, WE LEFT OUT THE LAST 2X4 – THE ONE WE WOULD EVENTUALLY FASTEN THE COPING TO – SO THAT WE COULD ADJUST THE POSITION OF THE COPING AS NEEDED.

THE PATTERN TO FOLLOW WHEN FRAMING YOUR MINIRAMP - COURTESY OF DIYSKATE.COM

RECOMMENDED

WHEN FRAMING THE TRANSITION, MAKE SURE YOUR 2X4 SPACING IS NO MORE THAN 8 INCHES. THE LESS SPACE THE BETTER AS MORE SUPPORT WILL PUT LESS STRESS ON THE BENT PLYWOOD AND GENERALLY FEEL STURDIER UNDER YOUR SKATE.

PUT AT LEAST TWO SCREWS IN EACH SIDE.

NO MATTER WHAT SIZE YOU CHOOSE, ON THE TRANSITION YOU'LL WANT YOUR 2X4'S VERTICAL AS OPPOSED TO FLAT. IF YOU'RE MAKING A BIGGER RAMP, PUT THE BASE 2X4'S VERTICAL AS WELL. THIS WILL GIVE IT MORE STRUCTURAL SUPPORT SO THE RAMP WONT FLEX AS MUCH UNDERNEATH YOU. DON’T ATTACH THE 2X4 THAT YOU’RE GOING TO FASTEN THE COPING TO UNTIL AFTER THE PLYWOOD IS LAID. WE GOT THAT PART RIGHT.

STEP 5 – THE BUILD: COVER THE RAMP

This will require a few sets of hands. For us, it was a three man job.

WHAT WE DID

STARTING FROM THE TOP, WE PUT OUR FIRST 3/8” SHEET OF PLYWOOD FLUSH WITH OUR TOP 2X4” SO THAT OUR COPING COULD SIT FLAT ON TOP. WE BENT THE PLYWOOD LENGTH WAY AND HAD TWO SIDE BY SIDE ACROSS THE RAMP. WITH SOME DIFFICULTY, YOU’LL HAVE TO BEND THE PLYWOOD SHEET INTO PLACE WHILE ONE PERSON SCREWS IT IN FROM TOP TO BOTTOM. MARK THE 2X4’S WITH A PENCIL TO MAKE IT EASIER TO SCREW IN. A SCREW EVERY FOOT SHOULD SUFFICE, SO ABOUT 4 EVERY ROW. MAKE SURE THEY’RE IN TIGHT! THEN, TOP IT WITH A LAYER OF 1/8” PLYWOOD THE SAME WAY AS BEFORE. THIS STUFF IS WAY EASIER TO BEND AND HAVING PUT THE 3/8” DOWN, YOU’LL BE A MASTER. THIS METHOD GAVE US AN EXCESS FOOT OR SO OF PLYWOOD IN THE FLAT SECTION OF THE RAMP ON EITHER SIDE. WE DECIDED WE'D LAY DOWN A 2X4 BENEATH THE SEAM WHERE THE TWO SIDES OF THE FLAT SECTION CAME TOGETHER AND DRILL THEM BOTH INTO IT. SINCE WE DID IT LIKE THIS, WE'D EASILY BE ABLE TO UNSCREW ONE SIDE AND MOVE OR STORE EACH SIDE OF THE RAMP IF WE NEEDED TO.

FULLY COVERED MINI

RECOMMENDED

IF POSSIBLE, SOAK, STEAM, OR TREAT THE WOOD BEFOREHAND SO IT’S EASIER TO BEND. WE HAD A REAL TOUGH TIME BENDING IT AND EVEN HAD SOME OF THE 3X8’S CRACK ON US. IF YOU’RE WILLING TO SPEND A COUPLE EXTRA BUCKS, I’D RECOMMEND DOING TWO TO THREE LAYERS OF 1/8” PLYWOOD. IT’S EASIER TO DEAL WITH AND WOULD STILL MAKE FOR A STRONG STRUCTURE. A LOT OF DIY PLANS ACROSS THE WEB ALSO RECOMMEND USING MASONITE OR TEMPERED HARDBOARD AS A FINAL LAYER. THIS PLUS A COUPLE SHEETS OF 1/8" PLY COULD BE IDEAL.

Can you use cardboard instead of landscape fabric?
Can you use cardboard instead of landscape fabric?

After removing all the tape, stickers, and nonbiodegradable materials off the cardboard, you can use it as a biodegradable landscape fabric...

Read More »
Last updated Jan 7, 2020
Why are there worms in my compost?
Why are there worms in my compost?

EUGENE – Most people shudder when they see maggots in their bin composter or compost pile. Don't be grossed out – they won't hurt you. In fact,...

Read More »
Last updated Dec 2, 2022

OUR 1/8" PLYWOOD IS STARTING TO BREAK DOWN A BIT, SO SOMETHING TO TOP IT OFF WOULD BE NICE. WE MAY END UP PUTTING A SHEET OF MASONITE OVER TOP. We used PVC (plastic) pipe even though most plans we read advised against it. We figured it would do the trick and it does, unless you want to be able to easily slide on it. Your coping should stick out just enough that it makes tricks easier, but not so much that it impedes your flow. The best method we found to fasten the coping was to drill it into a parallel running 2x4 support directly behind it. This 2x4 is also used to support the platform (or deck) of the mini.

WHAT WE DID

TO FIND A SPOT THAT WORKED, WE PLACED THE LAST 2X4 JUST BEHIND THE COPING, UNDERNEATH WHERE YOU’LL BE PLACING THE DECK. YOU CAN ADJUST THE POSITION OF THE COPING BY MOVING THIS 2X4 BACKWARD AND FORWARDS. JUST MAKE SURE IT’S PROPPED ON TOP OF THE TRANSITION. WHEN YOU’VE DECIDED ON A SPOT YOU LIKE, YOU’RE READY TO FIX IT IN PLACE. TO FASTEN THE COPING, DRILL A HOLE IN YOUR PIPE THAT’S WIDE ENOUGH FOR THE DRILL BIT AND SCREW HEAD TO PENETRATE. THIS HOLE SHOULD ALLOW YOU TO REACH A SCREW ALL THE WAY THROUGH TO THE OTHER SIDE. IF DONE CORRECTLY, YOU’LL BE ABLE TO SCREW THE PIPE INTO THE 2X4 BEHIND, TIGHTLY FASTENING THE COPING INTO PLACE. SCREWS WITH A HEAD DIAMETER TWICE THE SIZE OF THE SCREW DIAMETER ARE IDEAL.

RECOMMENDED

OUR METHOD WORKS PRETTY WELL. BUT LIKE EVERYONE ELSE, I'D RECOMMEND METAL COPING IF YOU CAN FIND IT. IT'S JUST GENERALLY WAY BETTER FOR SKATING. IF YOU CAN, MAKE SURE THE COPING IS PRESSED TO A 2X4 BENEATH AND BEHIND IT. THIS WILL MAKE IT FEEL A LOT STRONGER.

STEP 7 – THE BUILD: THE DECK

You’re almost there. At this point you may have already dropped in like we did. We spent a couple days skating without a deck before we decided to actually finalize it and put the deck on.

WHAT WE DID

WE FOUND SOME SCRAP ¾ PLYWOOD IN OUR BACK ALLEY THAT WE CUT INTO 4 2’X4’ PIECES. WITH THREE 2X4S RUNNING LATERALLY BENEATH THEM, WE SCREWED THEM IN AND WERE BACK TO SKATING.

RECOMMENDED

SOMETHING VERY SIMILAR TO WHAT WE DID. YOU'LL FIGURE IT OUT.

STEP 8 – SKATE IT!

If it’s in your front yard like ours is, get ready for the passerby’s to comment and get stoked. You’ll make some new friends for sure. Have fun, be safe, and make sure to reluctantly give your neighbours a break from the noise every once in a while.

pacificboarder.com - How Not To Build A Miniramp | Pacific Boarder - Snow, Skate, Surf
Are Rubbermaid sheds waterproof?
Are Rubbermaid sheds waterproof?

According to Rubbermaid, the units are water-proof, leak-proof, rot-proof, rust-proof and weather-proof.

Read More »
Last updated Mar 27, 2022
What is a good size storage shed?
What is a good size storage shed?

Generally speaking, a 12-foot-by-12-foot shed will suit a large yard, while an 8-foot-by-10-foot one is better for a medium-size yard. In selecting...

Read More »
Last updated Jan 21, 2020
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion
Why throw an aspirin into the washing machine?
Why throw an aspirin into the washing machine?

Aspirin is known for removing stains and keeping whites bright and sparkly even if you've worn the same shirt over and over. Aug 22, 2019

Read More »
Last updated Oct 23, 2021
Can I build a shed next to my fence?
Can I build a shed next to my fence?

In order to avoid potential buildup of mold, mildew, and rot growth, it is advised that you should leave space between a fence and a shed. This...

Read More »
Last updated Jul 15, 2018