DIY Builds
Photo: Karolina Grabowska
When using closed-cell foam in walls, it is generally considered sufficient when 2 to 3 inches are sprayed. Open-cell foam in walls would not be sufficient with just 2 inches, requiring at least 3.
Inhaling or touching mold or mold spores can cause a person to become allergic to mold. Molds can trigger asthma symptoms including shortness of...
Read More »
7 Ways To Get Rid of Mice Naturally And Humanely Remove all food sources. Mice only need small amounts of food each day. ... Get rid of nesting...
Read More »
Permits are required for finishing a basement in Georgia when the finishing involves structural work, plumbing work, electrical work, egress point...
Read More »
So, Can You Build a House Without a Foundation? The simple answer is that of course, you can — as long as you don't need it to stand for long....
Read More »
From an energy-saving perspective, there is little doubt that spray foam insulation is a big money saver. Closed-cell insulation is dense, so when applied to walls and ceiling it can serve a variety of purposes ranging from temperature retention to waterproofing, and even structure stabilization and reinforcement. Open-cell spray foam is a more affordable option, and it expands quickly, filling up the cracks and crevices quickly, though it is not vapor or water-resistant, so it is highly effective only when there is no chance of moisture seeping in. Its sealing ability also serves as a powerful barrier against insects and pests coming into the home. Spray foam is commonly used in residences and industrial structures, and especially effective as a retrofit product in aging homes. Because spray foam is spray applied almost all substrates are suitable to receive spray foam. Caution should be taken to avoid over filling areas causing damage through the force of the expansion.
Cons: May not prevent pine needles, seeds and other small debris from slipping through. May exaggerate roof ice dam issues.* ... Gutter Guards are...
Read More »
three legs Did you know that the traditional milking stool was designed specifically with three legs instead of four? This is because 3 legs are...
Read More »
One of the primary advantages of spray foam insulation is its moisture resistance. Mold stems from high moisture levels as it needs the moisture to thrive. One of the many useful reasons for using spray foam is to mitigate mold growth. Therefore, mold will not grow on spray foam insulation. Because it reduces the effects of moisture in the areas it covers, even the covered areas experience less potential for mold growth due to decreased moisture.
Of Roman/French origins, carpenter comes from the Latin word 'carpentum' (meaning a chariot or carriage) and later the Old French word 'carpentier'...
Read More »
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the...
Read More »
Two layers of foil are pressed together and milled at the same time, because otherwise, it would break. “Where the foil is in contact with another...
Read More »
A bed of sand and gravel is a great foundation for you to use for your paving slabs. As we touched on above, it's far easier to lay than mortar,...
Read More »