DIY Builds
Photo by Laura Tancredi Pexels Logo Photo: Laura Tancredi

Is block and beam better than slab?

One of the advantages of beam and block versus a traditional floor slab is that very little excavation is needed. All that's required is a minimum gap of 150mm between the soil and the underside of the beams to allow for ventilation. This can be easily taken care of with a bit of site levelling.

How much does it cost to build a 10x8 shed?
How much does it cost to build a 10x8 shed?

Shed Cost by Size Size Average Cost (Labor Included) 8' x 8' (64 sq.ft.) $3,200 8' x 10' (80 sq.ft.) $4,000 8' x 12' (96 sq.ft.) $4,800 10' x 8'...

Read More »
What is the easiest skilled trade to learn?
What is the easiest skilled trade to learn?

Welding is one of the occupations that are easy to learn in the skilled trades. You can learn how to weld within less than six months of practical...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

One of the best decisions I made when self-building my own house was to specify beam and block intermediate flooring. In this article I thought I’d expand on the subject and explain in detail why this system is such a good choice, not just at ground floor level but also for upper storeys – at least where it’s practical for your scheme.

Oversite options

Once the footings are in, you’ve got a choice in terms of what you use as the platform (the oversite) on which your home will be built. Years ago, the simplest solution was to fit timber joists covered in floorboards. But suspended timber structures can be draughty and noisy, so they won’t suit modern self-builds, where decent levels of insulation and airtightness are required. The most straightforward option today would be a concrete slab laid on top of compacted hardcore. The latter would be covered with a layer of sand (known as blinding) to protect against sharp edges, plus rigid foam insulation on a damp proof membrane. While this is a common choice, the labour requirement is reasonably high – plus you’ll need to wait for the concrete to cure before work can continue. New systems appear all the time. Fully-integrated insulated slabs are now a popular choice on high-spec eco homes, for example. Even more common, however, is the use of beam and block for the oversite – and potentially intermediate floors, too.

What is beam and block?

The system comprises a series of inverted T-beams made of pre-stressed concrete, which look remarkably similar to train rails in profile. These beams are cut to a specified length – determined by the construction drawings. On site, they are laid perpendicular to the supporting blockwork walls that make up the inner leaf of the footings (at ground floor level). The rails rest on a damp proof course and have a 100mm bearing; in other words, they cover the whole width of that inner leaf of blockwork. The beams are laid at suitable centres to allow them to be filled with standard-sized lightweight aircrete or dense aggregate blocks, until the whole slab area is covered. The floor structure is then brushed over with a 4:1 dry mix of sharp sand and cement to fill the gaps. Because this is an entirely dry process, in that no mortar or adhesive is required, as soon as the slab is laid, it forms a instant working platform, ready for your follow-on trades.

How much does a 12x12 room addition cost?
How much does a 12x12 room addition cost?

The cost to add a bedroom is $100 to $155 per square foot, or about $10,300 to $24,900 on average. A small 12x12 bedroom (144-square-feet) with a...

Read More »
Why do homes in England not have closets?
Why do homes in England not have closets?

At the time historical homes were built, most individuals didn't own more than a few articles of clothing, greatly reducing the need for closet...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Do metal sheds need ventilation?
Do metal sheds need ventilation?

Your shed must have a good venting system to maintain temperature control, even in the winter months. No one wants excess heat building up in their...

Read More »
What is the best material to put under pavers?
What is the best material to put under pavers?

Sand-set base A sand-set paver base is the traditional way to install pavers. This method uses a layer of sand as a bed between the base and...

Read More »
What is better particle board or MDF?
What is better particle board or MDF?

MDF is fairly stronger than particle-board. Particle-board is not very strong. MDF is quite durable. Particle-boards are relatively less durable....

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
What is the most common firewood?
What is the most common firewood?

Oak Is the Most Common In the United States, oak is probably the most common type of firewood. Regardless of where you live, you can probably find...

Read More »