Photo: Zaksheuskaya

Is it better to stain or paint pressure treated wood?

backyardscape.com - Which is Better: Staining or Painting Pressure Treated Wood?

What time of year do most houses sell?

Spring and summer are the best seasons to sell Typically, sellers list their homes in the spring and summer because the weather is good, especially...

Last updated Oct 12, 2019

What wire can be direct buried?

Common types of cables with a copper conductor suitable for direct burial are USE-2, UF-B Underground Feeder Cable, and Tracer Wire. Aluminum URD...

Last updated Sep 15, 2022

Promotion

Pressure-treated lumber has been a godsend for exterior projects by extending the life of wood beyond its natural lifespan in harsh outdoor conditions. But that same process that gives wood its preserving properties can wreak havoc on stain or paint jobs when done improperly. This raises the question of which material is better to use on pressure-treated wood: paint or stain? And how can you apply it without having to watch your hard work come undone in short order?

Experts recommended that you stain pressure treated wood rather than paint it. The primary reason for this is that paint rarely adheres to pressure-treated wood very well because of the process used for the pressure treatment. Best Water Based Stain #1 Deck Wood Deck Paint and Sealer - Advanced... Best Oil Based Stain Penofin For Pressure-Treated Wood - F3pttga 1G... Check Price Check Price Best Water Based Stain #1 Deck Wood Deck Paint and Sealer - Advanced... Check Price Best Oil Based Stain Penofin For Pressure-Treated Wood - F3pttga 1G... Check Price However, as we will explain later, it is possible to paint pressure-treated wood if you take the proper steps. The key is understanding what makes pressure-treated wood unique as a category of lumber and how to work with it effectively.

Can You Paint or Stain Pressure Treated Wood?

Pressure-treated wood is wood that has undergone a process in which an enormous amount of pressure is applied to inject a solution of water and preservative chemicals deep into the wood grain. This solution is designed to protect the wood from rot and extend its lifetime. This makes pressure-treated lumber useful for outdoor settings like decks and fencing, where it will be exposed to weather and moisture regularly and would otherwise decay quickly. However, this pressure-treatment is why a stain or paint job can fail much of the time. Wood that has been pressure-treated is always wet immediately after the process, and it remains wet for weeks in most environments. The wood needs to absorb a stain to be effective, so it needs to be dry before staining. In this article we talk in more detail about how long to wait before staining a pressure treated wood fence. For similar reasons, wet lumber can hinder how well paint adheres to the wood, but the added problem of the preservatives in pressure-treated wood makes it difficult for the paint to bond; this is why it’s advisable to stain pressure-treated wood instead of paint, as painting requires additional preparation.

What Types of Pressure-Treated Wood Are There?

Pressure-treated wood falls into one of two basic categories, above-ground and ground-contact. The picture below shows the two different types of pressure treated wood and the color difference between the two. These different types of pressure-treated wood are distinguished by how and where they are used, but the steps to prepare them for staining or painting are the same.

Ground contact posts with above ground fence slats.

Above-Ground Pressure Treated Wood

Above-ground wood is intended to be used in areas where the wood is easily accessible and can be replaced or maintained with little trouble. Builders use this type of wood where it will be at least 6 inches above ground level. Also, the wood should be well-ventilated and allowed to drain when it gets wet. Above-ground wood can be used as deck rails or deck boards if they are easy to reach or replace when needed. In the picture, all fence slats, as well as the top beams, rafter and arch of the pergola gate, are above ground.

What is Ireland's flower?

the shamrock Although arguably not exactly a flower, the shamrock is a small clover which is now the national flower of Ireland. It came to be so...

Last updated Nov 20, 2018

Which is better concrete block or poured foundation?

Poured concrete wall foundations are arguably stronger than cinder blocks. Poured walls have a better lateral strength, which means they can resist...

Last updated Feb 22, 2018

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

Ground-contact wood has been treated to keep a more generous amount of preservative than above-ground wood. It is therefore suited for above-ground applications or situations where it will be in contact with the ground. Some ground-contact wood uses would be fencing where the fence posts are in-ground, as is the posts in the pergola gate above. When your project involves wood being less than 6 inches from the ground, or where it may be poorly ventilated and challenging to maintain or replace, you need to use ground-contact wood. Home Depot is starting to carry more ground contact 2x material as well as ground contact wood decking.

How to Stain Pressure-Treated Wood

Pressure-treated wood can be stained rather easily. However, you need to be mindful of when you stain the wood since doing so too early can cause your stain to be “rejected,” causing your work (and money) to go to waste. Here are our recommendations for the best stains for pressure treated wood. Whether you want to use a water based or oil based stain, use the following steps to ensure your efforts are successful.

Test the wood to see if it is ready.

Pressure-treated lumber is often wet when you first buy it, and if it is, you won’t have any success in trying to stain it immediately. Wet wood cannot absorb the stain properly. However, you may stain immediately if you have kiln-dried pressure treated wood. Check if the board has a stamp or a tag that reads “ADAT” (air-dried after treatment) or “KDAT” (kiln-dried after treatment). This type of lumber can be stained immediately (provided it hasn’t gotten wet since you purchased it, such as being out in the rain). To test if the wood is ready to be stained, use the “sprinkle” method. Sprinkle some water onto the wood, and then time how long it takes for it to be absorbed. If the water is absorbed completely, you are ready to stain. Wood that is not ready will pool or bead the water on the surface, signaling it still retains too much moisture.

Wash the wood to clear dirt and debris.

If the wood is brand new, then you don’t need to worry about this step, although a wash won’t hurt your efforts. If you are staining wood that has been installed for a while, then it is essential to clean the wood before staining to get rid of dirt and other debris that can interfere with the stain. It’s a good idea to apply a cleaning solution to the wood to loosen up the material you want to wash away. You should let this solution soak in for at least 10 minutes, but follow the directions on the container. We showcased how to clean a wood fence without pressure washing using different methods. Afterward, rinse the solution off with a garden hose or a pressure washer (especially if there are tough stains). Then, wait at least 24 hours for the wood to dry (and since the last rainfall) before treating it with the stain.

Prepare the wood one last time.

How much would it cost to convert a garage into a granny flat?

Whether you choose to design yourself or hire a professional, you can expect to pay anywhere between $2,000 to $11,000, depending on the type of...

Last updated Aug 9, 2020

How do you hang something heavy without anchors?

The best way to hang things without a wall anchor is by securing the item to a stud. This can be as simple as driving a screw straight into the...

Last updated Sep 2, 2018

Promotion

Prepare the area by sealing off with painter’s tape or a tarp so you can avoid getting stain where you don’t want it (such as patios, furniture, or house siding). Sweep the wood with a broom to clear off any leaves or dirt that may have collected while the wood was drying.

Apply the Stain to the Wood

After opening the container of stain, stir it well to ensure the color is even throughout, and pour some into a paint tray. Start by applying a small amount of stain to a patch of wood and confirm that you are comfortable with its appearance. This is your last chance to change your mind, so don’t rush this. Once you’re ready to commit, start staining the wood. After you are done, let the stain dry for at least 24 hours before walking on it. The recommended tool for applying stain is a paint pad applicator. You can attach it to a pole for easy application without having to bend over. You can also use a roller to stain a deck, which will be a lot faster. You could use a brush, but on a deck this will be slow and uncomfortable since you will be on your knees much of the time. Instead, use the brush for staining between cracks or deck boards and any other challenging areas to reach.

How to Paint Pressure-Treated Wood

As we mentioned earlier, it’s recommended that you stain rather than paint pressure-treated wood. However, if you follow a couple of steps, you can get an excellent result from painting as well: First, make sure the wood is completely dry before you paint, and then prepare the wood as described in the steps above on how to prepare for staining. Then, use a bristle brush to apply a coating of primer to the wood. This primer should be engineered for use on pressure-treated wood. After the primer has dried, apply two coats of latex paint to the wood. You may need an additional coat of paint or more to get the best results. If you’re wondering if you can use indoor paint outdoors, check out our article to explain why it isn’t a good idea.

Final Thoughts

Pressure-treated wood requires some consideration when planning a new project or restoration of existing wood, but thankfully, it doesn’t need to be a frustrating experience to stain or paint. As long as you follow the steps given on preparing and applying stain or paint, you should have a great-looking result that can last for years.

backyardscape.com - Which is Better: Staining or Painting Pressure Treated Wood?

Do plastic sheds leak?

Similar to their wood & metal counterparts, plastic sheds are designed weatherproof, not waterproof. Resin delivers an impervious composition,...

Last updated Jun 15, 2022

How much weight can a 1/2 wedge anchor hold?

Technical Specifications for Wedge Anchors Size Minimum Embedment Pull-Out (lbs.) 5/16” 1-1/8” 892 3/8” 1-1/2” 1223 1/2” 2-1/4” 2999 5/8” 2-3/4”...

Last updated Aug 10, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How much does a finished shed add to home value?

A shed can even help to increase your asking price when you decide it's time to sell. In fact, some professionals estimate that a new shed could...

Last updated Jul 11, 2018

Promotion

How do I keep my shed warm in the winter?

If you want to heat your shed, you can add insulation, bring in different types of heaters, and/or bring in different kinds of stoves. The best way...

Last updated Jul 19, 2019