DIY Builds
Photo by Antoni Shkraba Pexels Logo Photo: Antoni Shkraba

Is it cheaper to drywall or shiplap?

Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option.

How do I stop condensation in my garden shed?
How do I stop condensation in my garden shed?

How To Keep Your Garden Shed Moisture-Free Seal Any Leaks. Your primary line of defence against moisture is to prevent water from getting into your...

Read More »
Can you use pallets as firewood?
Can you use pallets as firewood?

As firewood You can burn heat treated pallets safely since they have not been chemically treated. Apr 3, 2019

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Despite the crowd of admirers shiplap has gained in recent decades, drywall is still holding its own as one of the most popular wall materials. Both are well suited to a variety of decor styles, but beyond this, each has distinct strengths and weaknesses.

Know What You’re Getting

iStock.com / stockfour

To decide what suits your walls and budget best, it helps to know exactly what goes into shiplap and drywall. Drywall is made from calcium sulfate dihydrate (gypsum) formed into panels. It’s most often sold in 4-by-8-foot sections of 1/2-inch thick, although it’s produced in a range of sizes and thicknesses. In addition to the standard white drywall, moisture-resistant green drywall (greenboard) is also available. Shiplap is a little more complicated. The term specifically refers to thin wood boards with two opposing rabbet joints, or notches cut on the edges, designed to overlap and form a tight seal when the boards are installed in an alternating formation. Square-edged wood boards, tongue-and-groove boards, and overlapping clinker (lapstrake) planks aren’t shiplap, although they’re often mislabeled as such. Shiplap might have gotten its name from the clinker planks used on ships, but the two have different shapes. In many older homes, walls were lined with wood boards for weatherproofing. These might look like shiplap from the outside, but you can’t be sure without removing a board and looking at the edge. Because true shiplap can be expensive, some homeowners opt for faux shiplap using other types of boards to get the same look.

Appearance and Style

Shiplap has been trendy since the 1990s, but it’s not new. Its ability to stand up to inclement weather has made it popular since the 1800s, first for exterior cladding, then for interior use. Historically, shiplap was used for weatherproofing, not aesthetics. Builders lined walls with shiplap, then covered the boards with muslin or cheesecloth, then added wallpaper to hide the seams. Today, those seams are a big part of shiplap’s appeal. The artisanal look of handcrafted wood shiplap evokes a warmth reminiscent of cozy seaside cabins and rustic farmhouses. At the same time, the clean, uniform lines have a modern feel that can freshen up an older home. This ability to complement both historical and contemporary homes equally well is a major reason shiplap remains so popular. It’s unlikely to look dated anytime soon. Installed horizontally, shiplap creates a sense of space, making the room feel larger. Installed vertically, shiplap draws the eye upward and makes the room seem higher. Shiplap on the ceiling enhances this effect. Board width also affects the feel of the room. Narrow 4-inch Cape Cod shiplap is a classic, but it can also look busy and constricting, which is why 6- and 8-inch shiplap styles are gaining popularity.

What's cheaper OSB or plywood?
What's cheaper OSB or plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be...

Read More »
Is thyme toxic to cats?
Is thyme toxic to cats?

True Thyme (Thymus serpyllum) is not at native plant and it is not on the ASPCA plants toxic to cats list. Apr 15, 2015

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Shiplap makes decorating easier because it’s strong enough to hold nails or screws for items of up to 20 pounds anywhere on the wall. You won’t need to search for studs as you would with drywall. Drywall came on the scene in 1916 as an affordable alternative to plaster. The texturing technique of skim coating can give drywall the visual interest of traditional plaster, a look valued for its simplicity and restraint. This is a good choice if you want to give the room the sophisticated character of an Old World urban interior. If you’re more interested in expression than restraint, drywall lets you or your contractor use layering and joint compound to create raised patterns or elaborate bas-relief sculptures for a completely unique wall. Without additional texturing, drywall provides a smooth surface for paint or wallpaper.

Cost and Installation

Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option. The average price for drywall is $15 per 4-by-8 foot panel or around $2.15 per sq. ft., but you’ll also need joint tape, joint compound (drywall mud), and a sander to install it. Once the installation is done, you’ll be left with a layer of fine sanding dust that’s a chore to clean up. Because installation is messy and laborious, many homeowners hire a professional for the job. Expect that to cost you somewhere between $1.50 to $1.80 per sq. ft. In contrast, solid wood shiplap costs between $2.50 and $7.00 per sq. ft., although you might find it at your local sawmill for less. Plywood and medium-density fiberboard (MDF) shiplap boards are cheaper, but less durable. The big advantage shiplap has over drywall is how easy it is for a DIYer to install with nothing more than a saw, level, stud finder, and hammer and nails. You can start from the top or the bottom, but if you’re not sure whether your boards will fit evenly, start from the top. This ensures you’ll have a full board where it’s most visible. Then fit the next board in place, level, and nail. Fill the nail holes with spackle or leave them exposed for a homespun look. If you spackle, you’ll need to do a little sanding, but cleanup is a breeze compared to drywall installation. If you use pre-painted board, the job is done at this point. Painting after installation works, too, but take care not to fill in the visible gaps that lend shiplap its distinctive look.

Can you eat vegetables grown in Miracle-Gro?
Can you eat vegetables grown in Miracle-Gro?

It is safe to eat vegetables grown with Miracle Gro but you need to wait at least two weeks after application of the chemical fertilizer so it's...

Read More »
Is a double top plate necessary for shed?
Is a double top plate necessary for shed?

A double top plate is a requirement when building larger garages or houses, but since most sheds don't exceed 16 feet in any direction, you can...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Maintenance and Durability

iStock.com / Artist’s Member Name

For both ease of maintenance and long lifespan, shiplap is the clear winner. It’s easy to clean with a damp sponge, although you’ll need to pay extra attention to the gaps, which tend to collect dust. Genuine shiplap made of 3/4-inch thick solid wood can stand up to years of wear and tear. Major damage is unlikely, and little scrapes and nicks only add character. If solid wood shiplap gets wet from a leaky pipe or broken appliance, it can be dried and saved. Plywood shiplap can tolerate some water, although MDF can’t. Drywall is delicate in comparison. It’s prone to scratches and dents, which make it look shabby rather than charmingly aged. A door blown open, furniture moved carelessly, or a pet scratching can leave a hole that’s a hassle to repair. Drywall wicks up water quickly and breaks down when wet, so any water is likely to destroy it. This vulnerability to water damage makes drywall tricky to clean. Because shiplap and drywall both have advantages, the choice between them depends on your priorities. If creating an atmosphere of cozy rustic warmth is your goal or you want a wall that’s durable, low maintenance, and easy to install by yourself, shiplap will meet your needs beautifully. For a more formal ambiance or greater flexibility in design, drywall is often a better choice.

Can you put a foundation under an existing shed?
Can you put a foundation under an existing shed?

The good news is that it is possible to put a foundation under an existing shed. Depending on its size, it could be easy to do too. Also, a great...

Read More »
What is better for a driveway crushed concrete or asphalt?
What is better for a driveway crushed concrete or asphalt?

Though both are incredible materials for driveways and other construction projects. As to which one will be better, this will depend on what you...

Read More »
Are shed plans easy to follow?
Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »
How much is it to build a 12x24 shed?
How much is it to build a 12x24 shed?

Average Cost to Build a Simple Shed (Shell) Average Cost to Build a Simple Shed (Shell) 20x20 Shed Price $1,500 $4,000 Cost to Build a 10x10 Shed...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Can you put a shed next to a fence?
Can you put a shed next to a fence?

In order to avoid potential buildup of mold, mildew, and rot growth, it is advised that you should leave space between a fence and a shed. This...

Read More »