Photo: Erik Mclean

Is it OK to pressure wash a bicycle?

Simply put, it is safe to pressure wash your bike, but like pro mechanics, you should follow some basic guidelines so as not to do any damage.

bikeradar.com - How to pressure wash a bike safely - BikeRadar

What is the cheapest gravel for landscaping?

Pea gravel Pea gravel is inexpensive- as we've mentioned, it's the cheapest landscaping stone you can buy! It's easy to find- Pea gravel is very...

Last updated Jan 26, 2018

At what temperature does Styrofoam ignite?

680°F Under certain fire conditions, EPS will ignite when exposed to an open flame. The transfer ignition temperature is typically 680°F (360°C).

Last updated Jan 3, 2023

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

A dirty bike is not a happy bike – riding about with your beloved bicycle entombed in filth will end up costing you precious watts on the road, as well as hard-earned cash through increased maintenance costs. Cleaning your bike with a pressure washer can save you a great deal of time and effort over the traditional bucket and sponge, provided you do it safely. In this step-by-step guide, we talk you through how to jet wash your road or mountain bike, and dispel some myths about pressure washing safety. Is it safe to use a pressure washer on my bike? At every professional bike race up and down the land, there will be mechanics frantically cleaning the bikes of exhausted racers. Despite having pro budgets, these mechanics aren’t going to be doing anything that would damage expensive components, jeopardising their riders’ chances on race day. Simply put, it is safe to pressure wash your bike, but like pro mechanics, you should follow some basic guidelines so as not to do any damage. Pressure washing dos and don’ts Unless you’re using a lower-power pressure washer, avoid spraying directly at any components that contain grease (headset, bottom bracket, hubs, etc)

Spray from a safe distance and slowly get closer

Remove any delicate componentry

Protect leather or other absorbent saddles from getting soaked

Thoroughly wash off any degreaser before applying lubricant

Protect braking surfaces, particularly disc brake rotors, from contamination

How to jet wash your bike – a step-by-step guide

Step 1: Remove and protect

Will Jones / Immediate Media

Before you even turn the pressure washer on, remove anything you consider to be vulnerable from your bike. This could include your GPS cycle computer, any luggage you don’t want getting soggy, and bike lights. If you have a permanently wired dynamo lighting system fitted to your bike, you may want to protect the headlight with a plastic bag.

Will Jones / Immediate Media

If you have a leather saddle, a protective cover or plastic bag will prevent it from absorbing any water.

Step 2: First pass

Will Jones / Immediate Media

Turn your pressure washer on and soak the bike all over, starting from a safe distance. Gradually get closer until you can safely remove the majority of the muck and no further.

Will Jones / Immediate Media

Unless you are using a lower-power pressure washer, avoid directing the jet of water into any areas that contain grease; stick to the main tubes and the tyres and rims. Your bike’s headset, bottom bracket, hubs and rear derailleur are all particularly vulnerable, as are pedal axles and any electronic componentry. Likewise, avoid seals on suspension components. If you’ve ridden through any animal excrement, be particularly careful when spraying this off your bike and seriously consider wearing eye protection because some can carry parasites that can cause blindness.

How many inches of gravel do I need for plants?

Typically, gravel gardening involves putting in some upfront work. It means creating a garden bed 4-5 inches deep with gravel laid directly on top...

Last updated Mar 30, 2022

Can outdoor wire run without conduit?

Does Exterior Wiring Need to Be in Conduit? In most cases, local codes require exterior wiring to be placed in a conduit when the wiring is...

Last updated Apr 2, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Step 3: Degrease

Will Jones / Immediate Media

Now you have the lion’s share of the grime removed, apply degreaser to the crankset, chain, derailleurs and cassette.

Will Jones / Immediate Media

Use a stiff brush to release stubborn grease and a chain cleaner to get those rollers running smoothly again. If you’re using a spray degreaser, be mindful not to get any on your disc rotors or braking surface.

Step 4: Cleaning products

If there is any degreaser left on your drivetrain, it will degrade and remove any chain lube you add on afterwards.

Liberally apply cleaning products to the whole bike, especially the drivetrain.

Use a dirty sponge for the drivetrain and a clean one for the frame, seatpost, saddle and bar. Again, be careful to avoid flicking any greasy suds onto the disc rotors.

Step 5: Second pass

Will Jones / Immediate Media

Use the pressure washer again to remove any soapy residue from the whole bike, this time at a slightly greater distance than before. Any dirt should be loose and flow off easily by this point, so there’s no need to be close.

Step 6: Dry

Will Jones / Immediate Media

Using a clean rag, give the chain a quick dry before leaving the bike to dry fully. If you’re in a rush, an old towel will do the trick, but laying the bike driveside up in a sunny spot is just as effective if it’s not too cold.

Step 7: Lubricate and protect

Simon von Bromley / Immediate Media

Nobody likes the sound of a dry chain (and it’s less efficient), so don’t forget to apply your favourite lubricant and wipe off any residue following the manufacturer’s instructions. It’s important you wipe off excess lube because it helps to stop your chain from getting contaminated with road grime or mud, which will put you straight back to square one. If you want to have the most efficient (and cleanest) chain possible, you may want to consider waxing your chain.

Will Jones / Immediate Media

As for the frame, prevention is better than cure. Applying a coat of protective compound before your next ride can save you precious washing time afterwards. It can also help keep your paint looking fresh. Some protective compounds are aerosol-based (others are applied as a liquid with a microfibre cloth), which can contaminate your brake pads, so keep it away from your discs,

bikeradar.com - How to pressure wash a bike safely - BikeRadar

How do you reenforce a shed roof?

Repairing Your Shed Roof The first step is to remove your shed finials and fascia boards. ... Next untack and remove the damaged felt. ... Measure...

Last updated Aug 31, 2022

Can Neighbours complain about solar panels?

Can My Neighbours Object to My Solar Panels? If your installation is permitted development, or you have received the necessary planning permission...

Last updated Oct 2, 2018

Promotion

Is office shed worth it?

Multi-purpose: an office shed is a great place to be 100% dedicated to your work, due to it being quiet, warm/cool (whichever you prefer) and...

Last updated Jan 7, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How do I permanently get rid of weeds in my gravel driveway?

The only permanent way to get rid of grass that grows in a gravel driveway is to pave over the gravel with concrete. Since that's not an option for...

Last updated Aug 17, 2021