Photo: Erik Mclean

Is it worth painting an old fence?

If your fence is starting to look a little worn, now is a good time to paint or stain it. Whether you have a wood or chain-link fence, a well-applied stain or paint job every few years will help your fence last longer and keep it looking great.

truevalue.com - How to Paint or Stain Your Fence - True Value

How can I make my shed door more secure?

Fit shed security hinges correctly If you're worried about how secure your hinges are, you could replace any screws with through bolts and secure...

Last updated Feb 24, 2021

Should I remove bottom leaves from tomato plants?

If you are planning to plant the tomato plants deeply (tomatoes can form roots along the stem if it is buried), then you should remove the leaves....

Last updated Sep 6, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

A good-looking fence is part of your home’s curb appeal. If your fence is starting to look a little worn, now is a good time to paint or stain it. Whether you have a wood or chain-link fence, a well-applied stain or paint job every few years will help your fence last longer and keep it looking great. Everything you need for the job is available at your local True Value® hardware store.

Paint or Stain a Wood Fence

Step 1: Prepare the Ground

Remove leaves, grass or weeds along the base of the fence by mowing, raking, weeding by hand or spraying a weed killer. Place a drop cloth below or next to the fence to catch debris, dripping paint or overspray.

Step 2: Prepare the Fence

Clean, scrape and sand your fence with medium-grit or fine-grit sandpaper before you paint. You may want to use a pressure washer to clean the fence and blast off loose paint. You can also use a garden hose with a power nozzle, a scrub brush and a solution of detergent and water. Finish removing loose paint using a paint scraper. Use a power sander to blend any raised paint edges into the surrounding areas. Sponge any mold or mildew spots with a 50/50 solution of bleach and water to keep mold or mildew from growing back. Check your fence for termite or insect damage. If you find insect activity, replace the damaged wood.

Step 3: Paint or Stain Your Wood Fence

To make sure your finish stands up to the elements, you'll want to use a high-quality stain or exterior paint with UV inhibitors, such as True Value Woodsman® stain or True Value EasyCare® Ultra Premium Exterior Paint. Use a roller, pad or sprayer to paint large, flat surfaces. If you choose a sprayer, use an airless model or rent a high-volume/low-pressure (HVLP) sprayer for greater control with less overspray. Use a paintbrush to catch drips and work paint into hard-to-reach areas. For watery stains, use a stain brush, which holds more finish with less dripping.

HELPFUL TIP

It’s a good idea to do a yearly cleaning and touch-up of any peeling areas on your fence. If your wood fence is unfinished, consider staining it. While stain must be reapplied more often than paint, it involves less preparation.

SAFETY ALERT!

Wear safety glasses and a dust mask or respirator when using a paint sprayer.

Step 4: Clean Your Equipment

Is it cheaper to turn a shed into a house?

2) It can be cheaper. This means you should be able to pick up a higher-quality product for less money than it would cost you to make a lower-...

Last updated Aug 4, 2019

How long can a car idle in a garage?

Idling your car for 30 seconds to a minute is acceptable, and it will not cause any harm to your vehicle. With advanced technology, even if you let...

Last updated Jun 12, 2019

Promotion

Clean or discard the used roller sleeve and clean the roller frame and pan with the appropriate solvent (water or paint thinner, depending on the type of covering used). Follow the manufacturer’s instructions for a thorough cleaning of spray applicators.

Paint a Chain Link Fence

Step 1: Prepare the Ground

Clear a space to work before you get started. Discard leaves, grass or weeds along the base of the fence by mowing, raking, weeding by hand or spraying a weed killer. Protect the area by putting down a drop cloth to catch debris, paint drips or overspray.

Step 2: Prepare the Fence

Brush off dirt, spider webs and debris. If there are rusty spots or the fence is generally rusty, scrape off loose rust with a wire brush before applying a rust-inhibiting metal primer with a roller or sprayer.

HELPFUL TIP

Don't attempt to paint a vinyl-coated chain-link fence. This type of specialized work should be done by a qualified fencing professional.

Step 3: Paint It

Apply paint liberally with a 1-1/2" nap roller. Roll slowly at a 45-degree angle to work the paint into the chain weave. Have a helper follow up with an almost-dry roller. Use a brush to paint the posts, horizontal supports, gates and other hardware. To eliminate the dripping of rollers and brushes, apply two light coats of paint with a sprayer and follow up as needed with a brush. However, you'll be wasting paint since much of it will spray right through the fence. If you do choose a sprayer, be sure to paint on a day that's not windy—you could end up with paint mist everywhere.

HELPFUL TIPS

Thin paint will give better coverage on wire fencing. Thin your paint with up to one pint of solvent per gallon of paint. For slow-drying paints, string up caution ribbons or "wet paint" signs to warn people.

SAFETY ALERT!

Wear safety glasses and a dust mask or respirator when using a paint sprayer.

Step 4: Clean Up

Discard disposable materials, clean the roller frame and paintbrushes with water and pick up and store your drop cloths. Well done! Now step back and admire your fence staining or painting handiwork.

Project Shopping List

Here’s what you’ll need to complete this project successfully.

truevalue.com - How to Paint or Stain Your Fence - True Value

How do you know if your breathing in mold?

Signs and symptoms of allergic rhinitis caused by a mold allergy can include: Sneezing. Runny or stuffy nose. Cough and postnasal drip. Itchy eyes,...

Last updated Sep 2, 2019

Is a drip edge necessary on a roof?

Without a drip edge, water may end up beneath the shingles and may cause damage to various parts of the home. Though your home may not have...

Last updated Aug 11, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What are the disadvantages of SketchUp?

""Cons; moving objects can be a little difficult to toggle. It's hard to easily connect different points."" ""Occasionally lacking tools for...

Last updated Apr 21, 2022

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

How shallow can a metal roof be?

Roofing with exposed fasteners and lapped seams with sealant can go lower – ½:12. Standing seam metal roofs, which are either mechanically fastened...

Last updated Dec 31, 2021