DIY Builds
DIY Builds
Photo: Pixabay
The first tip for working with pressure-treated lumber is to let it dry before using it. Other woods such as redwood and cedar are dry when you buy them. But lumber that has been treated has been injected with massive amounts of chemicals and water.
A mother-in-law suite, as the name implies, is an additional living space within your property or home designed for use by your in-laws. Put...
Read More »
Although the amount will vary depending on the size of your car's battery, around 10 solar panels should generate enough electricity to charge the...
Read More »
These are! They guide you every step of the way to complete your dream shed.
Learn More »QUESTION: I am building several outdoor projects with pressure-treated wood. I’ve been told that the wood should be stained. I was under the impression that pressure-treated wood would last in its natural state for years--just the way it comes from the lumber dealer. ANSWER: Outdoor or pressure-treated lumber is treated with chemicals to resist decay and insect attack. This procedure permits the consumer and forest industry to make use of inferior grades of lumber, rather than increasing the demand for redwood, cedar or cypress. But unlike species of timber that are naturally decay- and insect-resistant, these lesser species have more pronounced grain and are more prone to splinter and crack than redwood or cedar. So, even though the wood is treated, it is best to apply a stain--or at least a water repellent--as soon as your project is dry enough. The first tip for working with pressure-treated lumber is to let it dry before using it. Other woods such as redwood and cedar are dry when you buy them. But lumber that has been treated has been injected with massive amounts of chemicals and water. For wood that will be in ground contact, these liquids penetrate the wood completely. If possible, handpick your own wood at the lumber dealer. Select lumber that looks straight and true and is lighter and drier to the touch. These pieces have less water content and will be ready to use sooner. For very heavy lumber, understand that the extra weight you feel is fluid weight and will evaporate in time. Stack wet lumber on a flat surface such as a driveway or patio, use spacers between boards to let air circulate and check the wood for weight and by touch for moisture. We have let pressure-treated lumber sit for four or more weeks in 90-degree weather until it was dry enough to use without shrinking. When the wood is dry, it may be too hard to nail. Pre-drill holes for nails to avoid splitting the lumber. Use construction adhesives and metal connectors to reduce the number of nails or screws needed. Use only galvanized nails or coated screws for assembly. Apply stain or water repellent to the “down” side of the lumber before you nail it in place. Joists, braces and the underside of deck boards will be hard to reach and finish when you have nailed them in place.
Different applications will require a different amount of material. For example, driveways require at least three layers of material three to four...
Read More »
the shamrock Although arguably not exactly a flower, the shamrock is a small clover which is now the national flower of Ireland. It came to be so...
Read More »
Can you put a working toilet in a summer house, garden room or shed? YES! A toilet can be installed in a garden room, as it does not need to meet...
Read More »
While you could try fitting the door yourself, remember, the experts have had a great deal of practice and a lot more experience than you! It often...
Read More »
Other items in high demand for online buyers are mobile phones, consumer electronics, footwear, convenience food, health supplements, beauty...
Read More »
How to Waterproof Your Shed Choose an Appropriate Location. ... Raise the Shed Off the Ground. ... Choose the Right Foundation. ... Build a...
Read More »
Promotion