DIY Builds
Photo by SHVETS production Pexels Logo Photo: SHVETS production

Should I put a plastic sheet under my shed?

Plastic Shed Foundations Promote Air Circulation This will aid the air circulation and will help to keep the base of the shed dry and will prevent rotting.

What can you fit in a 10 by 20 storage unit?
What can you fit in a 10 by 20 storage unit?

Typically, a 10x20 storage unit can hold: 2 sets of bedroom furniture. Queen or King size beds. Large appliances. Couches, living room sets, end...

Read More »
What do you use to seal a shed floor?
What do you use to seal a shed floor?

The floor should also be made of a treated material, like treated plywood. This lessens the likelihood that moisture will penetrate into the...

Read More »

The switch to plastic means that now, products such as our plastic shed base tiles are much more accessible as they are much easier to handle, transport and install. This switch has saved people countless labour hours, huge sums of money and reduced both the amount of plastic going to landfill and in turn the amount of carbon dioxide produced as a by-product of the manufacturing process. “That’s all well and good but why would I use a plastic shed base instead of just putting the shed straight onto compacted hardcore?” Simply put, our plastic shed base panels have been designed and engineered to not only support the weight of your shed, but also to help prolong the life of any wooden structure placed on top. How does it do this? Let’s break it down into the benefits:

Plastic Shed Bases Don’t Absorb Water

It’s quite common knowledge that water is one of the most destructive forces that can come into contact with wood. Unfortunately for sheds, there’s plenty of the wet stuff knocking around in the UK! Our plastic shed bases are designed to be filled with gravel (but can be left unfilled while still achieving the same goal) which allows water to pass through the surface without absorbing any of it. As both the plastic shed base and the gravel-fill contained inside of it are not porous, they do not absorb any rainwater and simply allow the water to pass straight through the top, soaking into the floor below and dispersing away in the most natural way. This process actually helps to improve the quality of the water too as some of the pollutants in rainwater get captured by the gravel and soil below and naturally break down. Again, as the plastic is non-porous, the water will not be soaked upwards from the ground and brought into contact with the bottom of the shed. This helps to prevent the shed from rotting from the bottom up, unlike a shed placed directly on hardcore which will suffer from water being soaked up from the bottom of the shed as the wooden shed bearers are in direct contact with the ground. If a large amount of rain falls in a short period of time or the drainage of the soil is not particularly good, the rain can form puddles and these often gather around structures such as sheds. This puddling often gets absorbed by the shed bearers and poses a threat to the shed as more moisture soaks into the wood and over time causes rotting and the natural break down of the wooden fibres. As concrete slabs are not permeable (but are slightly porous) they will absorb an amount of water as well as doing nothing to combat puddling. So when the rain falls, concrete will not only trap water around the base of your shed, it’ll also continue to allow water to soak into the shed from within the slab itself.

Is steel guitar easy to learn?
Is steel guitar easy to learn?

The Pedal Steel Guitar is considered one of the most difficult instruments to master. It can take many years to be proficient, but some who have a...

Read More »
Can you put a shed on pavement?
Can you put a shed on pavement?

Most homeowners, however, can build a shed base with paving slabs. It takes a little time and elbow grease, but a foundation will prolong the life...

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Settlement/Sinking is Prevented by a Plastic Shed Base

As the rain falls over the years, the ground goes through a continual wetting and drying process. If a shed is placed directly on grass or soil, this can mean that the ground becomes saturated and starts to be moulded or indented by any heavy items placed on it. This results in a sinking effect that doesn’t always occur evenly across the whole area of the shed, often with one corner or side slipping into the soft ground below. The shed then becomes uneven and puts intense strain on the construction of the beams and slats and can cause the shed to start to break up and puts it at risk of damage from wind. If placed on compacted hardcore, the problem is still present but will take longer as the sandier material washes out of the hardcore and into the soil surrounding it. This then causes unevenness and can only be rectified by lifting the shed and building the washed out areas back up to ensure its strength and stability. Plastic shed base panels interlock together to create one continuous surface, supported by a compacted hardcore base. So even if there’s localised wash-out of the sandier material in the hardcore (which can be vastly reduced by using a membrane in the build-up) the grid will help to bridge the gap while still offering strength. Of course, plastic does not become weathered or soggy in wet weather, giving you a solid base all year round. Placing a shed directly onto hardcore or concrete slab bases effectively traps a pocket of air between the base of your shed and the ground. This air pocket can become quite moist and the moisture then condenses on the wooden base of the shed, posing a risk of rotting from the bottom up. Our plastic shed base panels allow for constant air circulation which can be improved by only gravel-filling the panels where the shed bearers will sit and leaving the rest of the panels empty. This will aid the air circulation and will help to keep the base of the shed dry and will prevent rotting.

What's the average cost for barn doors?
What's the average cost for barn doors?

Wood barn doors cost an average of $1,850, or between $650 and $3,050. Wooden barn doors have a highly prized rustic style, making them the most...

Read More »
What is a farmers porch?
What is a farmers porch?

Farmers Porch: A farmer's porch (sometimes referred to as an open porch) is a style that is traditional to old New England homes. These open-air...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Do I need rebar for shed base?
Do I need rebar for shed base?

Step 8: Install Rebar Net. Concrete makes a permanent slab on which to build or place your shed, but it is brittle. It needs reinforcement to give...

Read More »
Do it yourself projects at home?
Do it yourself projects at home?

30 DIY Home Projects Absolutely Anyone Can Do Wallpaper a Wall. Make Compost. Tile a Backsplash. Install Vinyl Flooring. Build a Raised Garden Bed....

Read More »