Photo: Thirdman

Should there be gaps in a shed?

An air gap is important for shed insulation as it helps to keep the temperature inside stable and prevents moisture damage. There are a few different ways you can create an air gap, such as by using baffles or installing a soffit vent.

gardenbuildingsdirect.co.uk - Do You Need An Air Gap For Shed Insulation? (2022) | Blog

How big should a foundation be for a shed?

If your shed has a built-in floor, you want the gravel foundation to be 2ft longer and 2ft wider than your shed wall dimensions. If your shed does...

Last updated Mar 18, 2020

Can you put a shed directly on grass?

Using dirt, lawn or gravel for the base: Never attempt to erect your garden shed directly on bare ground, gravel, or lawn. This could damage the...

Last updated Jul 24, 2019

Promotion

Do you need an air gap for shed insulation?

Yes – if you want to keep the temperature in your shed under control and allow the exterior wall to breathe, you need an air gap! Moisture build-up is a big issue when it comes to sheds, and can damage both the contents of your shed and the shed itself. An air gap will help to prevent moisture build-up whilst also retaining heat in winter. An air gap creates a barrier between the insulation (or membrane) and the exterior of your building, which helps to keep moisture out. This is perfect if you’re storing any valuable items or perishables in your shed, as it will help to protect them from damage. Note: The following shed insulation tips will also apply for summerhouses, garden workshops, garden storage units and log cabins.

What Are The Benefits Of Insulating Your Shed?

The majority of points outlined will be linked to moisture and its prevention, as well as temperature regulation.

Insulation:

Keeps the heat in

Keeps the shed dry

Prevents moisture damage

Allows the your shed to “breathe”

Will help extend your shed’s usage life

Keeps the heat in

One benefit of keeping the heat in is that it will make the shed more comfortable to use in winter. This can be important if you’re using it as a workspace, as you’ll be able to stay warm while you work. It can also help to protect any items that are stored in the shed from the cold. This is particularly useful as common items like tools and electrics can be damaged by the cold weather. Otherwise, when winter’s gone and you start taking out your tools again, they may not work as well as they should (or may even have stopped working completely!). By insulating your shed, you can help to prevent this from happening, and ensure that your tools remain in good working order when you need them.

Keeps the shed dry

Keeping your shed dry is important for a number of reasons. Firstly, it will help to protect any items that are stored in the shed from moisture damage. This is especially important if you’re storing anything made of wood, as excessive moisture can cause it to warp and become damaged. Secondly, it will ensure water droplets and condensation doesn’t form on the inside of your shed. This can eventually lead to mould and mildew growth if left untreated. Not only can this damage your shed, but it also poses a health risk, as mould spores can be harmful to breathe in.

Prevents moisture damage to insulation

As well as keeping the shed dry, an air gap will also help to prevent moisture damage. This is because it creates a barrier between the insulation and the exterior of your shed. This will stop any moisture that does get in from reaching the insulation, which could cause it to become damaged.

Allows the exterior of your shed to breathe

Another benefit of an air gap is that it allows the exterior of your shed to breathe. This is important as it will help to prevent moisture build-up, which can damage both the shed and its contents.

Will help extend the life

By adding insulation to your shed, you’ll be helping to extend its life. This is because it will protect the shed from moisture and the elements, which can both cause damage over time. Those who don’t insulate their sheds will likely find that they need to replace them more frequently. This not only costs money, but it’s also both time-consuming and inconvenient.

The Benefits of Having an Air Gap

How can I get free electricity for my home?

Generating Electricity at Home Residential Solar Panels. Every ray of sunshine that lands on your roof is free electricity for the taking. ... Wind...

Last updated Jun 9, 2022

What brings up property value?

Making your house more efficient, adding square footage, upgrading the kitchen or bath and installing smart-home technology can help increase its...

Last updated Mar 6, 2019

Promotion

The main benefit of having an air gap is that it helps to keep the temperature inside your shed stable. This is especially useful in summer, as it’ll stop the heat from building up and making your shed unbearable to be in. It also helps to protect your belongings from moisture damage, as it stops damp air from reaching them. This is perfect for anyone who stores valuable or delicate items in their shed, as it will help to keep them in good condition. Finally, it can also help to reduce noise pollution from outside your shed. This is perfect if you use your shed as a workspace, as it will create a peaceful environment for you to concentrate in.

How to Prepare to Insulate Your Shed

Like most things, preparation is key when it comes to insulation. You need to make sure you have the right materials and that your shed is clean and dry before you start.

Step 1 – Have a good clear out

This sounds obvious, but you need to make sure you have enough space to insulate your shed effectively. This means having a good clear out and getting rid of any unnecessary items that are taking up space. Not only will this give you more room to work in, but it will also help to keep the shed tidy and organised. Once the insulation is in place, it’s going to be more difficult to move things around, so it’s best to do it now.

Step 2 – Give the shed a good clean

Yeah, we know… Who really wants to clean their shed? However, before you start insulating, you need to give the shed a good clean. Any dirt or dust left on surfaces could end up trapped between the insulation and the cladding, which will make it more difficult to clean in the future.

Step 3 – Check for any damp or mould

This is an important step, as you need to make sure there’s no damp or mould present before you start your insulation. If there is, it needs to be dealt with before you do anything else. Otherwise, you run the risk of trapping it between the insulation and the shed and making it worse. To do this, you can either use a damp-proof course or a mould inhibitor. These can be applied to the affected areas before you begin insulation, which will help to prevent any further problems.

Step 4 – Get your materials ready

Once you’ve prepared the shed, it’s time to get your materials ready. You’ll need insulation, of course, but you also need something to fill the gaps with. This is where an air gap comes in handy, as it will help to create a barrier between the insulation and the exterior of the shed. You can buy air gaps from most DIY stores, or you can make your own using a piece of cardboard – just make sure it’s sturdy enough to withstand the weight of the insulation.

Step 5 – Start insulating

Now it’s time to start insulating…

Begin by applying insulation to the floor, making sure to fill any gaps with the air gap. Then move onto the walls, again filling any gaps as you go. Once you’ve done this, you can start on the ceiling. It’s important to make sure that the insulation is evenly distributed, as otherwise, it won’t be as effective.

Step 6 – Check for any gaps

Once the insulation has been completed, it’s time to check for any gaps – these can be tricky to spot, but they’re important to fill, as otherwise, you’re going to lose heat through them.

How do you disinfect a wooden shed?

But for unpainted sheds, a stronger solution can be used, mixing 1 cup of bleach with every 3 cups of water. Whichever route you go down, you...

Last updated Apr 25, 2022

What permanently kills mold?

Bleach kills virtually every species of indoor mold that it comes into contact with including mold spores which leaves a sanitized surface making...

Last updated Jan 22, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

The best way to do this is to use a piece of cardboard or something similar. Slide it along the surface of the insulation, and if there’s a gap, you’ll feel it. Once you’ve found one, just fill it in with more insulation. And that’s it! You’ve now successfully insulated your shed. Just sit back and enjoy the warmer temperatures inside.

How to Create an Air Gap?

There are a few different ways you can create an air gap in your shed.

Install baffles

One of the most popular methods is to use baffles. These are sheets of material that you install on the inside of your shed, and they create an empty space between the insulation and the exterior of your shed. They ensure that there is proper airflow, and they also prevent any vents or openings from being blocked.

Material needed:

Baffles

Saw

Screws or nails to affix

Installation instructions:

Measure the inside of your shed so you know how many baffles (and of what size) you need. Cut the baffles to size, using a saw if necessary. Install the baffles on the inside of your shed, making sure they’re evenly spaced out. (You can use screws or nails to do this). Make sure there are no gaps between the baffles so that the air can flow freely.

Install a soffit vent

Another option is to install a soffit vent – this is a small opening that you create in the shed, and it allows air to flow in and out. It’s important to make sure that the soffit vent is properly sealed, as otherwise, it could let moisture in.

Materials needed:

Soffit vent

Caulking

Screws

Installation instructions:

Measure the opening for the soffit vent and cut it to size. Install the soffit vent in the opening, using caulking to seal it (and any gaps) in place.

Rigid foam insulation

This type of insulation comes in sheets that you can cut it to size and fit it in your shed. It’s important to make sure that the foam is properly sealed so that air can’t get through. You can use caulking or tape to do this.

Materials needed:

Rigid foam insulation

Caulking or tape

Installation instructions:

Cut the foam insulation to size so that it fits snugly in your shed. Install the foam, using caulking or tape to seal any gaps. Double-check that there are no gaps or openings that air can get through.

Key Takeaways:

Moisture is the main enemy of sheds, so it’s important to take steps to prevent it from causing damage. An air gap is important for shed insulation as it helps to keep the temperature inside stable and prevents moisture damage. There are a few different ways you can create an air gap, such as by using baffles or installing a soffit vent. Rigid foam insulation is another option, but it’s important to make sure that there are no gaps or openings that air can get through.

Bio

Des Dreckett is the head of content and co-founder of Outdoor Rumors, A website dedicated to helping households transition to sustainable energy by providing helpful information and resources.