Photo: KoolShooters

What are the key causes of anchor failures?

In most cases, anchor installation failure is due to the installer not knowing which setting tool to use and how to correctly set the anchor.

blog.midfix.co.uk - What is the main cause of anchor failure - BS 8539:2012 guidance

How much would it cost to build a bathroom in a shed?

At $50 to $100 an hour, that brings the cost to $500 or more. And if you're looking to trick out your shed with a wet bar or convenient bathroom?...

Last updated Jun 2, 2019

How many solar panels can I have?

No, there is no limit to the number of solar panels you can have. However, there may be a limit on how much power your system is allowed to...

Last updated Nov 8, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Anchors are a small component to which little consideration is frequently given but are vital to preventing the collapse of the structure or installation that depends on them. A true anchor failure is very rare, however, that isn’t to say that they do not fail. In our latest sound-out episode Stevan examines the two causes of anchor failure. As the M&E industry becomes ever more regulated, specifically with the introduction of 'the golden thread', there is now a need to provide evidence when an anchor/fixing is specified. Anchor/fixing compliance doesn't have to be complicated, the guidance is clear within BS 8539. Simply click on the relevant link to find what you are looking for.

What is the main cause of anchor failure?

What are the main anchor installation errors that cause anchor failure?

How do you correctly install a drop-in anchor?

What is the correct method to set a drop-in anchor using automatic setting tools?

What is the correct method to set a drop-in anchor using manual setting tools?

How can anchor selection cause suspension failure?

How common are anchor installation errors?

What is the main cause of anchor failure?

Incorrect anchor installation is the most prolific cause of failure.

The anchor has not been selected correctly in the first place (the specifier has not followed the correct due diligence around selection as outlined in BS 8539:2012 code of practice)

What are the main anchor installation errors that cause anchor failure?

For the M&E industry the drop-in anchor, (otherwise known as wedge anchors / hammer sets / ceiling anchors /over-head anchors) are often the anchors that are installed incorrectly. In most cases, anchor installation failure is due to the installer not knowing which setting tool to use and how to correctly set the anchor. Drop-in anchors are quite tricky to manually set, you must use the correct setting tool and have got to hit them quite hard for several blows with a suitable sized hammer to set them. You have got to drive the plug-in to the correct depth. Often the drop-in anchor is underset, when they are loaded incorrectly, they will only take a partial load, resulting in bracket collapse.

How do you correctly install a drop-in anchor?

How do I insulate a shed to my house?

Be sure to do your own research and make the best decision based on how you plan to use the shed. STEP 1: Measure the Space Between the Studs. ......

Last updated Apr 1, 2022

What is the average credit score by age?

In 2019, when the national average credit score was 703, those in their twenties averaged 662, while those 60 and up had an average credit score of...

Last updated Dec 6, 2018

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

For this you will need:

Drilling machine (ensure you have one that gives you the correct depth for the specified anchor) The correct drill bit – where possible use a drill bit with a PGM logo

A method for clearing the h ole (blow-out pump)

The correct weighted hammer

A manual or automatic setting tool

PPE equipment

To install a drop-in anchor the first task is to drill the hole to the correct depth suitable to the specified anchor, you then clean the hole using a blow-out pump, finally, you can either use a manual or automatic setting tool to complete the installation. Please note: It is critical when installing an anchor that holes are drilled to the correct diameter and depth. Using a worn drill bit results in undersized holes, making installation difficult and increasing stresses in the anchor material and potentially leading to a failure – inspect drill bits frequently and replace when worn. Removing dust from holes is also important to prevent the anchor bottoming (anchor failing) on the compacted dust.

What is the correct method to set a drop-in anchor using automatic setting tools?

One way to set a drop-in anchor is through an automatic setting tool, simply slip the setting tool housing over the stop drill bit, insert this into the SDS drill ‘turn on to hammer only’ and you can then automatically insert the wedge anchor.

It is important to note that according to BS 8539:2012;

‘To ensure wedge anchors are correctly set use only the setting tools supplied by the manufacturer. Using an SDS setting tool generally achieves better results than can be achieved by hand especially in overhead situations’.

What is the correct method to set a drop-in anchor using a manual setting tool?

The second way to set an anchor is by using manual setting tools. Using the correctly weighted hammer blow the anchor several times ensuring you can drive the plug-in to the correct depth. Please note, if you are using a setting tool equipped with a witness mark ensure that this is left in the lip of the anchor for correct installation.

How can anchor selection cause suspension failure

What is the best insulation for sheds?

The best insulation for a shed is on that uses a reflective insulation with a rigid insulation. This insulation will not sag, is easily cut to...

Last updated Apr 28, 2018

What do woodworkers charge hourly?

As a point of reference, the shop rate for woodworking in the U.S. and Canada is between $35 and $85 per hour according to FDMC's Pricing Survey....

Last updated Sep 11, 2021

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Numerous factors influence anchor selection. If the correct due diligence is not followed by the specifier then it can also be a reason that contributes to anchor/site failure. As BS 8539:2012 code of practice outlines, there are six main areas that the specifier must examine before an anchor can be selected. Substrate – the manufacturer should advise what substrate is suitable for that anchor, cracked , or non-cracked concrete. Loadings – what load can the fixing take and can the fixing perform to the load requirement? Once again, this would be outlined by the ETA.

Environment – is it a corrosive environment?

Type of install – is it going to be a through fix or a flush fix?

Type of anchorage – torque-controlled, deformation-controlled, undercut/key or resin.

Approvals – ETA documentation

After selection, it is then the responsibility of the specifier to ensure that the originally specified anchor is supplied on-site.

How common are anchor installation errors?

The CFA (Construction Fixings Association) highlights two case studies showing the damaging effects of anchor installation failure -

CFA Case Study 1

CFA Case Study 2

Overall, they are the two reasons why anchor failures occur, due to incorrect selection and installation errors.

What are the key causes of anchor failures?

How much would it cost to build a bathroom in a shed?

How many solar panels can I have?

Can I build my own shed?

What is the main cause of anchor failure?

What are the main anchor installation errors that cause anchor failure?

How do you correctly install a drop-in anchor?

What is the correct method to set a drop-in anchor using automatic setting tools?

What is the correct method to set a drop-in anchor using manual setting tools?

How can anchor selection cause suspension failure?

How common are anchor installation errors?

What is the main cause of anchor failure?

Incorrect anchor installation is the most prolific cause of failure.

What are the main anchor installation errors that cause anchor failure?

How do you correctly install a drop-in anchor?

How do I insulate a shed to my house?

What is the average credit score by age?

Are shed plans easy to follow?

For this you will need:

A method for clearing the h ole (blow-out pump)

The correct weighted hammer

A manual or automatic setting tool

PPE equipment

What is the correct method to set a drop-in anchor using automatic setting tools?

It is important to note that according to BS 8539:2012;

What is the correct method to set a drop-in anchor using a manual setting tool?

How can anchor selection cause suspension failure

What is the best insulation for sheds?

What do woodworkers charge hourly?

Are shed plans easy to follow?

Environment – is it a corrosive environment?

Type of install – is it going to be a through fix or a flush fix?

Type of anchorage – torque-controlled, deformation-controlled, undercut/key or resin.

Approvals – ETA documentation

How common are anchor installation errors?

CFA Case Study 1

CFA Case Study 2

Further reading

How do you keep a shed cool without electricity?

What materials do I need to build a 12x10 shed?

What is our National Flower?

What should I lay under gravel?