Photo: Felicity Tai

What can I use instead of wall anchors?

The best way to hang things without a wall anchor is by securing the item to a stud. This can be as simple as driving a screw straight into the drywall and then into the stud, or a piece of wood can be mounted to span multiple studs.

abutterflyhouse.com - 4 Ways to Hang Things Without Wall Anchors - A Butterfly House

Do you leave a dehumidifier on all day?

How Long To Run Your Dehumidifier? So to recap, run your dehumidifier unit for at least 12 hours a day. This is a good rule of thumb. Again, it's...

Last updated May 10, 2018

How big of a solar system do I need to go off-grid?

If your energy needs are around 1,000 to 5,000 watts, go for a 24 volt system. If your energy needs are over 3,000 watts, go for a 48 volt system....

Last updated Jul 25, 2018

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

So you’ve got something heavy, but you don’t have any wall anchors. No problem! The best way to hang things without a wall anchor is by securing the item to a stud. This can be as simple as driving a screw straight into the drywall and then into the stud, or a piece of wood can be mounted to span multiple studs.

There are a variety of ways to do this, so keep reading!

Note: This blog contains affiliate links. If you click and make a purchase, I may receive compensation (at no additional cost to you.)

Worthwhile Background Information

Behind the drywall, are a bunch of vertical pieces of wood. Those are called studs. They hold the drywall up (as well as support the weight of your house.) I once cut a giant hole in my wall, and found this. The weird window shape is abnormal, but this picture should still give you an idea of what’s back there. Look at the bottom half for what’s in a normal wall: (If you have plaster walls, it looks a bit different and you’ll want to use a different procedure, so go check out this post on hanging things from plaster walls.) In modern homes studs are located 16″ apart, while in older homes studs are 24″ apart. If you can secure your items to these studs, it will be secure. Those studs aren’t coming down! Everything except for option 1 (which is for super-light items only,) will require you find the location of the studs before starting. If you have stud finder, awesome, use that! If not, go check out this post on how to find a stud without a stud finder before you start.

Option 1: Nail in Drywall

If you just need to hang something that only weights a pound or two, then a nail in the drywall might be enough. Your item really does need to be light, though. Anything heavier than 1.5 pounds, and I’d start looking for another option. But many, if not most things I want to hang on the wall hit this weight requirement. This scarf organizer, for example, is hung with two small finishing nails:

And small picture frames usually just need a nail.

Larger, heavier frames usually requirement something stronger, though!

Option 2: Screw in Stud

The easiest way to hang something heavy without a wall anchor is simply to hit a stud when you put in a screw. I managed to do this when hanging a painting, although ironically, I didn’t realize I’d hit a stud until I was trying to stick a drywall anchor in and failing, hence the giant hole behind it.

What happens to your skin when you stop wearing foundation?

A brighter, healthier complexion, as well as fewer clogged pores and potentially even less blackheads, pimples, and breakouts. The longer your skin...

Last updated Jul 23, 2021

How do I get electricity to my outside shed?

You should always hire an experienced and qualified electrician to make sure the job is done safely and properly. They will install an SWA cable...

Last updated Sep 3, 2020

Promotion

In order to make this work, you’ll need a screw that’s at least 1 1/4″ long. This will be enough to get through 5/8″ of drywall, and then get 1/2″ of screw into the stud. 1″ screws will probably work if you’re in a pinch, but I always aim for 1 1/4″.

There’s one big problem with the “screw in stud” method, though: It requires your item to be centered on a stud. If that was where you were putting your item anyway, great. But how often does that happen?

This next option gives you a bit more flexibility.

Option 3: Make a Rail

If you’re able to hit two studs, you can make a rail with a piece of wood. Then you can secure your screw(s) anywhere along the rail, since the rail will hold the weight of the object, and that is secured to the studs. The above photo is actually of a bunch of rails. I was doing something different here, but even one rail screwed in along the studs would be enough to hang heavy things off of. To install the rail, cut a piece of scrap wood long enough to span two studs. Then secure it by driving a screw through the rail, into the drywall and then into the stud. You’ll need a fairly long screw for this, since in addition to the drywall and stud, it needs to go through the rail as well. The exact length will depend on the thickness of your rail piece, but if you’re using a 3/4″ piece, you should aim for a 2″ long screw. The downside of this method is that, unless you want your rail to be visible, the width of your item needs to span two studs. Alternatively, you can make the rail the entire width of the wall, and hang multiple things from it. This is actually how Ikea’s upper cabinet system works. The rail spans the entire width of the cabinet, hitting multiple studs, then the cabinets are hung from the rail. This was from my kitchen remodel a few years ago. Anywhere you can’t see a full circle is where there is a screw. Most of those go through studs, although there are a couple that go into wall anchors. Older style homes sometimes have a picture rail system for hanging things. It’s a bit fancier with specialty molding, but it serves the same purpose.

What do I put in a shed?

What You Can Store In A Shed Gasoline. Gasoline won't freeze like other liquids. ... Propane Tanks. Propane is another fuel that is not ill-...

Last updated Sep 18, 2021

Does all OSB have formaldehyde?

OSB and exterior plywood both contain a formaldehyde-based, waterproof resin called phenol-formaldehyde (PF). Compared to the widely used urea-...

Last updated Feb 15, 2022

Promotion

I personally don’t have pictures, but here’s an image on Houzz if you want to see what it looks like. The white trim 20″ from the ceiling? That’s the picture rail. Short of a visible rail, however, the rail system doesn’t really work if your item is less than 16″ wide (or it is 16″ wide, but the placement doesn’t work out to span two studs.) In this situation, you could make a rail with one stud and a wall anchor. However, this article is about what to do if you don’t have a wall anchor, so… I wouldn’t risk making a rail with just a stud and the drywall. If you’re not going to be able to span two studs, you’re better off going to the store and getting a wall anchor rather than take the risk.

Option 4: Make a Cleat System

This is a variation on Option 3. Instead of just making a wooden rail and sticking screws into it, you can bevel the rail: This allows you to make a corresponding piece that goes on the item you’re trying to hang:

The two pieces lock together, and create a rock-solid hanging system.

This is about as sturdy of a system as you can make, however it requires more specialized tools and more work than the Option 3 rail. I love it though, and think it looks great in my dining room: Here, I opted to make a whole wall of slat rails that have the bevel, so I can hang things from any of the rails. You don’t need a whole wall to make it work, though, the system works even if you’ve only got one rail.

Final Thoughts

Given you can get a screw into a stud (or studs,) hanging things without a drywall anchor is easy. I love hanging rails, and I’m always excited when I’m able to hang directly onto a stud. But if you can’t hit a stud, drywall anchors are still the way to go. I have a whole post on picking a wall anchor, so go check it out if that’s the route you decide to go!

abutterflyhouse.com - 4 Ways to Hang Things Without Wall Anchors - A Butterfly House

Can you build another bathroom anywhere in your house?

As long as you have a little available space, access to sufficient electrical outlets, ventilation and adequate sound insulation, you can sneak a...

Last updated Oct 11, 2020

Does layering plywood make it stronger?

The more layers it has, the stronger the plywood is. Usually, the weakest plywood will have fewer than four layers. This grade of plywood is often...

Last updated Nov 25, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What is the best pipe for water main?

Copper pipes remain popular among plumbers and homeowners alike because they are corrosion-resistant and best suited to protect the quality of the...

Last updated Mar 24, 2022

Promotion

Whats the best way to heat a shed?

If you want to heat your shed, you can add insulation, bring in different types of heaters, and/or bring in different kinds of stoves. The best way...

Last updated Jul 14, 2020