Photo: Pixabay

What happens to plastic in extreme cold?

At cold temperatures, plastics tend to be harder, stiffer and more brittle. At elevated temperatures, plastics tend to be softer and more ductile.

curbellplastics.com - Plastics for Extreme Temperature Applications

Why put fabric under gravel?

Driveway fabric works by providing a separation layer between the driveway gravel and the earth below. Due to its high tensile strength, the fabric...

Last updated Aug 23, 2020

Can I charge my Neighbour to cut his trees?

What legal position do I have? You cannot force your neighbour to remove overhanging branches or fallen leaves on your property. However if these...

Last updated Dec 9, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Solve application challenges, find answers to material questions, and get valuable technical advice. We’re here to help. Advances in polymer technology have extended the operating temperature range of plastic materials so that they can now perform in conditions that are colder and hotter than ever before. At Curbell, we offer a variety of high-performance plastics for extreme temperatures, including Ultem®, Radel® R, PEEK (poletheretherketone) and DuPont™ Vespel®. High performance polymers can be engineered to have any of the following characteristics, which enhance their performance in extreme temperature environments:

Low or high thermal conductivity

Low rates of thermal expansion

Excellent wear properties

Good sealing characteristics

Long-term thermal stability

Creep resistance

Ability to maintain their mechanical properties at very low and very high temperatures

Resistance to hot water and steam

Applications for plastics in high temperature and low temperature environments include:

For more information about plastics designed for extreme temperatures—and to get suggestions from our technical experts—please contact us today. Cryogenic biotechnology machinery, spaceflight hardware, and low temperature physics equipment are sometimes required to operate at extremely cold temperatures. When designing plastic components for use in cryogenic conditions, it is generally beneficial to select plastic materials that exhibit ductile behavior at low temperatures and have low rates of thermal expansion. For cold temperature applications where heat transfer is a concern, it is also important to select a plastic material with the right thermal conductivity. At Curbell, we can talk with you about the variability in the thermal conductivities of plastics at cryogenic temperatures, with some materials functioning as thermal insulators and others having relatively high thermal conductivity. Plastics wear at different rates (and via different mechanisms) at low temperatures—so if an application requires a plastic part to function as a bearing in cryogenic conditions, it is important to select a material that has been engineered to have low friction and good wear properties at cold temperatures.

Plastics for High Temperature Applications

Selecting a plastic material for use in a high temperature environment requires careful review of material properties data. The following are some of the specific factors to consider: Strength and modulus – Plastics will soften (lose strength and modulus) at elevated temperatures. It is important to evaluate the mechanical properties of the materials being considered at the low end and high end of operating temperature range. – Plastics will soften (lose strength and modulus) at elevated temperatures. It is important to evaluate the mechanical properties of the materials being considered at the low end and high end of operating temperature range. Thermal expansion – Plastics tend to have much higher rates of thermal expansion compared with metals. The coefficient of thermal expansion should be carefully reviewed to insure that CTE mismatch between plastic parts and mating metal parts does not cause the device to malfunction due to dimensional changes. – Plastics tend to have much higher rates of thermal expansion compared with metals. The coefficient of thermal expansion should be carefully reviewed to insure that CTE mismatch between plastic parts and mating metal parts does not cause the device to malfunction due to dimensional changes. Creep strain and stress relaxation – Plastics exhibit increased creep strain and stress relaxation at elevated temperatures. These factors should be considered carefully during the design process.

How do you frame a shed floor?

Here's the process: Measure and cut rim joist and floor joist boards from 2×6 treated lumber. Set rim joists on shed foundation. Nail outer floor...

Last updated Apr 8, 2018

How long does MDF emit formaldehyde?

I called the manufacturer and an expert said eye-stinging symptoms were probably due to formaldehyde, which would dissipate after about three...

Last updated Jul 22, 2019

These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

Promotion

– Plastics exhibit increased creep strain and stress relaxation at elevated temperatures. These factors should be considered carefully during the design process. Degradation– Plastics may degrade over long periods of time in high temperature environments, especially if oxygen is present. Thermal degradation curves should be reviewed when selecting polymers for use in elevated temperature environments.

Plastics for Wide Operating Temperature Ranges

Aircraft, spacecraft, and other devices must function throughout a broad operating temperature range, from very low to very high temperatures. When plastics are to be used in these conditions, designers must be careful to select materials that will function reliably throughout the required temperature range. For example, the rate of thermal expansion for some plastics such as PTFE will vary considerably depending on the temperatures involved. This complicates design when a plastic part must function in direct contact with mating metal components. Some plastics including DuPont™ Vespel® tend to have very consistent rates of thermal expansion throughout a wide temperature range, simplifying part design. Vespel® formulations with additives and fillers such as Vespel® SCP-5050 are engineered to have extremely low CTEs, close to those of industrial metals. In addition to thermal expansion rates, our technical experts can help you review various considerations for using plastics in wide temperature ranges. For example:

At cold temperatures, plastics tend to be harder, stiffer and more brittle.

At elevated temperatures, plastics tend to be softer and more ductile. Read an article to learn more.

Plastics tend to have reduced chemical resistance at elevated temperatures.

Plastic bearings can be particularly sensitive to wide operating temperature ranges, since plastic components will undergo changes in their dimensions, mechanical properties, and friction and wear behavior when they are heated or cooled.

Extreme temperature application? We’re ready to help.

Our technical experts have proven experience with low temperature and high temperature applications, and can suggest appropriate materials based on your requirements. Whether you’re just starting the design phase, or you need to address an immediate need, we can help. Please contact us today to learn more.

Call 1-800-553-0335 | Ask an expert | Explore our materials

curbellplastics.com - Plastics for Extreme Temperature Applications

What wood is used for houses?

The main types of wood used in home construction are hardwood, softwood, or engineered wood. Examples of softwood include spruce, pine, fir, cedar,...

Last updated Aug 21, 2019

What color front door adds the most value?

SEATTLE, June 23, 2022 /PRNewswire/ -- A statement-making front door can boost a home's curb appeal and its value. Research from Zillow® finds that...

Last updated Nov 30, 2021