Photo: Anna Shvets

What is a lightweight anchor called?

The most popular type of anchor is the fluke anchor, also called the Lightweight or Danforth, which includes the West Marine Traditional and Performance2 anchors and is often the only anchor on many smaller boats. Light and easy to weigh, it stows flat and holds well in mud or sand.

westmarine.com - How to Select the Right Type of Anchor | West Marine

Do you need a base for a shed?

Typically, any shed larger than 6×8 or 8×8 is going to require a foundation. However, a foundation is a good idea even for small sheds, because the...

Last updated Feb 27, 2021

What can you put on rebar to keep it from rusting?

Put the rebar on top of a raised non-metallic platform, such as wooden pallets. Both the ground and concrete areas absorb moisture and can lead to...

Last updated Jan 25, 2019

Promotion

By Tom Burden, Last updated: 5/20/2022

How to Choose the Right Anchor For Your Boat

Boaters frequently ask us what the best type of anchor is for their boat and the answer is often “more than one anchor, of different types.” The type of bottom—mud, grass, sand or rock—will dictate different choices of anchors, as will the size and windage of the boat, the wind conditions and the sea state. We'll walk you through common questions and help you make the right choice. Rocna Anchors stand out for their holding power, setting ability and ease of use.

Which Style or Category of Anchor?

Choose between the two most common anchor styles, the fluke and the plow, or if you are boating in a small boat, on protected inland waters, the inland type. The most popular type of anchor is the fluke anchor, also called the Lightweight or Danforth, which includes the West Marine Traditional and Performance2 anchors and is often the only anchor on many smaller boats. Light and easy to weigh, it stows flat and holds well in mud or sand. Its excellent holding power-to-weight ratio means you can use a lighter anchor compared to other types, but it doesn’t hold well in grassy or rocky surfaces. Its flukes and stock (the wide crossbar at the top) are more prone to foul on rocks or the anchor rode. Plow and Scoop anchors—the “single point” style represented by the Manson Supreme, Rocna, CQR, Delta and Claw—have the best all-around holding ability in varying bottom conditions. They generally reset themselves easily if the wind or current changes direction. The newest “scoop” designs, like the Manson and Rocna anchors, include round “roll bars” that self-right the anchor, automatically turning it right side up. Plow/scoop anchors hold more effectively in grass, mud and sand. They do not have projecting flukes that foul easily, but their shape makes stowing them more awkward (a bow-roller or bowsprit is the best solution). Heavier powerboats and cruising sailboats often use plows as primary anchors. Claw anchors are also a great choice as they set easily and perform well in most conditions. They set easily in most bottom types but struggle with hard bottoms like clay or in heavy grass. Mushroom anchors are also a popular choice for smaller boats and personal water crafts like Jet Skis, Wave Runners or Sea-Doos. Their small size makes them easy to stow and many are PVC coated making them easy to clean as well. West Marine Traditional Anchor and Rode Package combines a Danforth-style fluke anchor, spliced three-strand line with galvanized Proof Coil chain, thimble and shackles. Excellent small boat rode at a value price. Delta is a modern plow-style anchor that’s popular in boats with bow rollers.

Use Two Anchors of Different Styles

Most boating experts agree that, for greatest anchoring security, you should carry two anchors of different styles, one each of the Danforth style and the plow/scoop variety. The type of bottom—mud, grass, sand or rock—will dictate different choices of anchors, as will the size and windage of the boat, the wind conditions and the sea state. Some anchoring situations also call for more than one anchor to be used simultaneously. You sometimes need to set two anchors in a crowded anchorage, with anchors at the bow and stern of the boat to limit its ability to swing. Two anchors set from the bow at a 60° angle are another good way to improve security against swinging and dragging, and they allow you to shorten the rodes and use less scope. In heavy weather conditions, where one anchor may not have enough holding power, setting a second anchor may be critical to staying put. Remember that as the wind speed doubles the force on the boat (and the ground tackle system) increases by four times.

How much does it cost to get a shed wired?

Usually, it is anywhere between $100-$600. The overall cost will also depend on the specifics of your situation (e.g: length of wiring, how much...

Last updated Dec 3, 2019

Does a dropped KERB add value?

Yes, building one will require planning and working with a contractor, but the investment is worth it. But does a dropped kerb add more value? It...

Last updated Jun 23, 2021

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What Weight Range Fits My Boat?

Choose an anchor that’s the right size for your boat and the locations and weather where you anchor. Take the anchor manufacturer’s suggested sizes into account and consider your boating style. Do you typically anchor for two hours or for two weeks, in a lake or in the Atlantic Ocean? The recommended anchor sizes from our website will work well for most boaters, under most conditions. Sizing an anchor for your boat reinforces, with some limits, the “bigger is better” idea. If your engine fails and you are drifting toward a lee shore, having a properly sized anchor ready could save your boat. But raising the anchor by hand, with no electric powered windlass, calls for light and efficient ground tackle (and a strong back).

Holding Power

Weight is important, but what you’re looking for when buying an anchor is holding power, which may have little relation to the anchor’s size and weight. When an anchor penetrates the surface of the seabed, suction created by the bottom material, plus the weight of the material above the anchor, creates resistance. In rocky bottoms anchors can’t dig in, but rather snag on protrusions and hold precariously. The holding power of modern anchors is remarkable, varying between 10 and 200 times the anchor’s weight. This means that some anchors that weigh only 5lb. can hold in excess of 1,000 pounds! For a detailed look at holding power, see the West Advisor article titled Anchor Testing, where you can download Bill Springer’s write-up on our tests from the October 2006 issue of Sail Magazine. Although the data is now a few years old, the technology is virtually unchanged.

What Are the Typical Bottom Conditions?

Anchors need to develop enough resistance in the seabed to withstand the environmental forces on the boat—the wind and the waves. An anchor’s ability to develop resistance is entirely dependent on its ability to engage and penetrate the seabed. In all of our anchor tests, there always seems to be one undeniable conclusion: the selection of a suitable bottom for anchoring is a much more critical factor than the design of the anchor. So how do you choose the right anchor design? You must take expected bottom conditions into account. Here are some potential options, based on the seabed: Sand: Fine-grained sand is relatively easy for anchors to penetrate and offers consistently high holding power and repeatable results. Most anchors will hold the greatest tension in hard sand. Pivoting-fluke anchors and non-hinged scoop anchors are the best types in sand. The Rocna performed excellently in our anchor tests in sand. The Fortress, an aluminum-magnesium Danforth-style anchor, has shown incredible holding power in our still relevant 2006 anchor tests, with the 21lb. FX37 sustaining over 5,000lb. of load.

What flooring is best for a shed?

Pressure-treated plywood is one of the best options for shed flooring. Pressure-treated plywood is resistant to wood rot, insects, and water. It is...

Last updated Oct 9, 2019

How fast can a pole barn house be built?

On average and pending size, barns take no more than three weeks to build. Post framed buildings go up quickly. They fulfill their function...

Last updated Apr 10, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Mud: Mud has low shear strength, and requires anchor designs with a broader shank/fluke angle and greater fluke area. This allows the anchor to penetrate deeply to where the mud has greater sheer strength. Mud is frequently only a thin layer over some other material, so anchors that can penetrate through the mud to the underlying material will hold more. Fortress anchors have greater holding power in mud because they can be adjusted from their standard 32° to a broad 45° fluke angle. Rocky bottoms: Holding power is most dependent on where you happen to drop the hook, rather than the type of anchor. Plow-shaped or grapnel-type anchors, with high structural strength to sustain the high point-loads, generally work the best. These anchors include the Claw, CQR, Delta, Rocna and Supreme. Shale, clay and grassy bottoms: Bottom types like these can pose a challenge to any type of anchor. For these types of bottoms, the weight of the anchor, more than its design is often the most important factor in penetration and holding power. CQR, Delta, Rocna and Supreme anchors are thought to be good due to their ability to penetrate vegetation. However, these conditions have a high probability of false setting, due to the anchor catching on roots and protrusions, rather than something solid.

Materials to Choose From

You have three options: galvanized steel, Grade 316 stainless steel or lightweight aluminum/magnesium. Most boaters choose a galvanized anchor for cost reasons, with the added advantage of having the highest tensile strength. Stainless anchors resemble works of sculpture to dress up the bow of your vessel. Boaters who care greatly about weight in the bow (owners of ultralight sailboats, sailboat racers) can choose the highly respected aluminum-magnesium Fortress anchor, the inexpensive Guardian or the Manson Racer.

Stowage in Roller and Lockers

Plow and scoop anchors have curved shanks that self-launch much more easily on your bow roller, and are the most common choice if you’re using a windlass and want remote-control operation. Scope: The ratio of the rode length to the height (distance from the bow chock to the bottom) is critical for safe anchoring. More scope is generally better. This example shows about a 4:1 scope.