DIY Builds
Photo by Ron Lach Pexels Logo Photo: Ron Lach

What is the hardest wood in America?

What is the hardest wood in North America? Of locally available woods, Black Ironwood is typically the strongest type of wood you can find in America. It's found in Florida and has a 3,660 lbf (16,280 N) Janka rating. Other strong North American woods include species of hickory, maples, oaks, walnuts, and beeches.

Does a shed door need a header?
Does a shed door need a header?

When framing for shed doors and window openings, it is very important that you frame in headers above the openings. All door and window openings...

Read More »
What can I put on my metal roof to stop sweating?
What can I put on my metal roof to stop sweating?

Traditionally, condensation is managed by insulating the metal roof so that the panel temperature never reaches the dew point. This is often...

Read More »
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »

What is the Janka wood hardness scale?

The Janka hardness scale measures the force that’s required to embed a steel ball halfway through a sample of wood. The ball is 0.444 inches in diameter and fired with increasing force. The pounds of force (or newtons if you’re using the metric system) needed to push the ball to the center is the Janka value you end up with. It’s a great way to measure how resistant a piece of wood is to denting and wear. Our Janka wood hardness chart shows how durable certain wood types are.

What is the hardest wood in the world?

The strongest wood in the world in terms of the Janka scale is Australian Buloke, which can withstand more than 5,000 pounds of force.

Here’s a list of the top ten hardest woods:

Australian Buloke: 5,060 lb f (22,500 N)

Baraúna: 4,800 lbf(21,000 N) Quebracho: 4,570 lbf(20,340 N) Guayacan: 4,500 lbf(20,000 N) Gidgee: 4,270 lbf(18,990 N) Snakewood: 3,800 lbf(17,000 N) Verawood: 3,710 lbf (16,520 N) Camelthorn: 3,680 lbf(16,370 N) African Blackwood: 3,670 lbf (16,320 N) Grey Ironbark: 3,664 lbf(16,300 N)

What is the softest wood?

Balsa, used in soft surfboards and musical instruments, is the world’s softest wood. In our wood chart, here’s the top ten that rank lowest on the wood hardness scale:

Balsa: 67 lbf (300 N)

What is the hardest wood in North America?

Of locally available woods, Black Ironwood is typically the strongest type of wood you can find in America. It’s found in Florida and has a 3,660 lbf (16,280 N) Janka rating. Other strong North American woods include species of hickory, maples, oaks, walnuts, and beeches. Pines and poplars, which are mass-produced in America, are fairly low on the Janka scale, but they’re quite versatile and useful.

How do you choose the right wood for the job?

If you’re trying to decide between maple vs. oak, poplar vs. pine, or an expensive hardwood versus a local wood species, the Janka scale can be helpful. Ask yourself, for instance, “Is pine hard or soft wood, and will it be useful for my project?” Since there are many types of pine, it could have a higher Janka hardness or a lower one, depending on the species. Note that our wood strength chart lists their uses as well, from flooring to instruments. There are so many types of wood out there; use our hardwood hardness scale to figure out what’s right for your next carpentry project! Here is a Printable PDF of 75 Types of Wood Ranked by Janka Hardness and How They Are Used This infographic was made by the carport and garage builders at Alan’s Factory Outlet.

Want to display this infographic on your website?

You can copy the below code and paste it into your website.

”75
By AlansFactoryOutlet.com

By Alan Bernau Jr

If you want to know how much it costs to build a detached garage, use our simple cost to build a garage calculator.

Do you need to duct armoured cable?
Do you need to duct armoured cable?

There is no need for ducting when installing Steel Wire Armoured (SWA) Cable. It can be buried directly in the ground with no further protection at...

Read More »
Do pallets get termites?
Do pallets get termites?

However, there are a number of factors that are affecting used pallets, which is why they need to be heat treated. One of the prime examples of why...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

What does a bag of cement cost?
What does a bag of cement cost?

Pre-mixed concrete bags PRE-MIXED BAGS AVERAGE COST PER BAG Mortar Mix (60 lb.) $6.04 High Early Strength Cement (80 lb.) $6.65 Portland Cement I...

Read More »
Can you camp on your own agricultural land?
Can you camp on your own agricultural land?

Any change of use from agriculture needs planning permission, although some small scale camping is allowed under permitted development rules. For...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
How long will a tiny house last?
How long will a tiny house last?

Tiny homes can last between 7-10 years depending on materials and regular maintenance. However, Park Model units last longer and are aesthetically...

Read More »
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Does a shed need rebar?
Does a shed need rebar?

Although rebar needs thicker concrete to work properly so we don't use it in slabs that are under 5 inches thick. If your using a 4 thick shed slab...

Read More »