What is the longest lasting flat roof?

EPDM, or Ethylene Propylene Diene Monomer, is known as the longest-lasting flat roof material. It's designed to withstand the most extreme weather conditions that a flat roof can face, and this durability can help it last at least 30 to 50 years.

legacyusa.com - Best Material For a Flat Roof - Flat Roof Materials & Installation Costs

Can I use only compost as potting soil?

Growing directly in compost is not usually recommended. Water retention and support may be lacking in a 100% compost growing medium. Mixing compost...

Last updated Jan 8, 2021

Which side of tar paper goes down?

When laying sheets of tar paper, always lay the sticky, glossy side down. Tar paper's two sides are noticeably different. One side is somewhat...

Last updated Mar 17, 2018

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Get Estimates From Roofing Pros Get Estimates Now

There are two basic types of covering for roofs: pitched and flat horizontal. Flat coverings were initially spread mainly in the southern Mediterranean and Asian countries, and pitched ones were found in countries of northern Europe. The explanation for this is quite simple: The covering should provide reliable house waterproofing and withstand the accumulating loads. This problem is not so acute in sunny southern countries; there, people usually choose the cheapest option of covering the building. In the northern countries, a pitched roof is a necessary option, albeit more expensive when constructing.

Reasons to Choose Flat Roof

Until recently, flat roofs have been designed only for industrial facilities or multi-story residential houses, while traditional gable, mansard, or hip types have been constructed for low-rise buildings. But the technology and improvement of building components’ market have made it possible to use horizontal coverings in individual housing development. Looking for qualified roofers near you? Find out how much your project will cost Not a real zip code. With a private house or cottage, it’s not hard to build a second and even third floor instead of the attic, and place a sports room, resting place, or a small greenhouse in the additional area. All of this contributes to the growing flat construction popularity, while modern technologies and building materials make it possible to not only reduce residential house building costs but also provide it with significant reliability and durability. Pros for main flat coverings include their simplicity and cheapness. If the price of arranging a pitched roof is about 20–25%, and sometimes even 50%, of the total cost, then investments in flat roofing materials will be mainly determined by the costs of strengthening the upper floor.

Best Material for Flat Roof

The components used for horizontal coverings should provide high-quality waterproofing for the entire structure. Nowadays, materials used for flat roofs must have these requirements:

Durability

Lightweight

Chemical protection

Heat insulation

Resistance to solar radiation

Biostability

Fire-resistance

Acoustic isolation

Lasting quality

Cost-effectiveness

Flexibility in application

Flat coverings consist of a collection of materials that provide reliable house waterproofing and maintain an optimal microclimate. These include:

Primers and mastics for reliable installation, ensuring joints tightness and additional waterproofing

Bituminous covering system

Drainage system

PVC membrane to create a durable and reliable waterproofing layer

In such a way, traditional paper, cardboard, and bitumen roofing products are inferior to modern components in all respects.

Flat Roofs Types

There are three basic types:

Single-ply membrane roofing (for example, EPDM)

Modified bitumen covering

Built-up roof (BUR)

Single-ply membrane roofing (EPDM)

The polymer membrane has become more and more widespread in building coverings’ repair and decoration areas, and it’s in demand in the USA, Canada, and Europe. Membrane roofs’ popularity is explained by their high reliability, rich color palette, good adaptability to different temperatures (whether low or high) and durability (life span up to 40 years). EPDM is the latest technology (+/- 55 years), while BUR is the oldest one (+/- 120 years). EPDM rubber covering is made from environmentally-friendly recycled rubber materials. In addition to pure EPDMs with a rubber base, composite flat roof replacement materials are also available. Their upper layer is traditionally rubber, while the lower one is flexible bitumen-polymer. It differs from other membranes with increased elasticity (about 400%) and lower cost.

How do you make Pebble magnets?

Prep the pebbles by laying them in front of the circles in a line. Add a dot of glue to each circle, press the glass pebble, hold for a second and...

Last updated Jul 7, 2022

What surface can rats not climb?

Glass: rats can't grab onto glass surfaces, which is why you probably won't find rats dart across your windows.

Last updated Sep 12, 2020

Promotion

The coating is resistant to any weather conditions.

EPDM roofing is durable, life span is 30 to 50 years.

Disadvantages:

It tends to absorb rather than reflect heat, which makes it energy-inefficient.

It’s not very environmentally friendly.

EPDM rubber covering prices vary from $4 to $8 per square foot.

Find qualified roofers near you Not a real zip code.

PVC Membranes

PVC Membranes are innovative waterproofing flat roof materials. PVC roofs are a single-layer type based on elastic polyvinyl chloride (PVC-P). Hot air welding provides it with absolute imperviousness.

The main pros are:

PVC buildings’ coverings are sturdy and elastic.

Membrane coatings are an excellent option for rough and deformed surfaces, as they have high deformation ability.

PVC membranes meet all fire safety requirements.

High vapor permeability eliminates the possibility of condensate moisture stagnation.

Being lightweight can significantly reduce the main structure load.

A single-ply membrane simplifies the process of covering.

Ease of installation makes it possible to conduct the repair job in almost any weather condition.

Installing a PVC membrane costs about $7 to $11 per square foot.

Built-up roof (BUR)

Built-up roof (BUR) uses tar and gravel to create a waterproof layer over the covering. This is one of the most costly types of roofing materials for a residential building. Here are the pros and cons:

Pros:

Simple repair or dismantling

Life span is about 10 to 15 years with proper maintenance and repair Several types of built-up roofing for any demand: smooth and ballast asphalt, cold layer, etc.

Excellent protection against water, ultraviolet rays, and adverse weather conditions

Low operating and maintenance costs over the entire life span

Durability due to gravel use

Cons:

Installation takes a lot of time

Prone to damage from wind and rain

May need to dismantle the entire roof to determine the source of damage

The cost varies from $5 to $8 per square foot.

Modified Bitumen

For 60 years, BUR has been the only option. Then, in the early 1960s, a new technology called Modified Bitumen was introduced. This type of covering has reinforced the proven effectiveness of BUR, but also added layers for strength and durability.

Pros:

Applied in overlapping reels to create large seamless areas

Available in a variety of application methods

Requires low maintenance due to its durability

Provides better elasticity and flexibility at low temperatures

Easy to set up

Affordable

Provides better durability than BUR, with the same ease of installation as EPDM

Cons:

Some application methods require an open flame/burner, which requires special safety measures.

Overlapping seams must be properly glued to prevent possible water leakage.

The price can range from $3 to $6 per square foot.

Spray-On Roof (Silicon spray)

It may not seem the safest or the most effective coating, but it is one of the most expensive types of roofing. This method uses a coating to repel water and has one important advantage: there are no seams here.

Price varies from $3 to $6 per square foot.

TPO roofing membrane

It’s advised to use this type on the construction of complex buildings, in particular – buildings of industrial and social purpose including enterprise workshops, administrative buildings, sports facilities, hotels, recreation centers, cafes, and restaurants.

Pros:

Are doors that open outward harder to kick in?

Outward swinging doors are more weatherproof and easier to operate. They do require sufficient space on the outside to operate freely, which means...

Last updated Apr 18, 2019

What size lean can I build without planning permission?

You can add a lean-to conservatory without planning permission to your home, as long as it is within the boundaries of your property and doesn't...

Last updated Sep 22, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Elasticity, resistance to deformation at sub-zero temperatures

Life span is up to 50 years

Low water absorption, vapor barrier properties

Fire-fighting chemical components

Membrane production technology involving the antifungal components use

The cost ranges from approximately $5 to $8.50 per square foot.

The use of top-notch roofing materials and technologies will make it possible to get away from the standard design, as well as to diversify individual solutions and options.

FAQ

What materials are used to make a flat roof?

A variety of materials can be used to make a flat roof. The most common ones include EPDM rubber, single-ply (TPO, PVC), modified bitumen, built-up roofs (BUR), and spray polyurethane foam. Many homeowners choose either EPDM or TPO. EPDM roofs are affordable and can reach a lifespan of 30+ years. TPO roofs are easy to install and maintain, and their white color can help reflect heat from the sun and improve a building’s energy efficiency.

What is the best material to use for flat roofs?

EPDM is the most popular material to use for flat roofs—and for good reason! Not only is it one of the most affordable materials, but it also has a respectable lifespan. Since it uses polymer and synthetic rubber, it provides the roof with excellent flexibility and elasticity. TPO is another popular flat roof material. It’s affordable, easy-to-install, and its white color helps improve a building’s energy efficiency.

What is the longest-lasting flat roof material?

EPDM, or Ethylene Propylene Diene Monomer, is known as the longest-lasting flat roof material. It’s designed to withstand the most extreme weather conditions that a flat roof can face, and this durability can help it last at least 30 to 50 years. If you’re seeking a long-lasting flat roof that’s permanently flexible and highly resistant to UV and infrared light as well as acids from rainwater, then EPDM may be the roof for you.

Can you use zinc on a flat roof?

Yes, zinc roofs can be used on very low pitches. In some cases, the slope can be as low as 3° depending on the type of jointing seam used. Zinc roofs are laid in bays, much like lead, and usually with standing seam joints. These types of roofs can last up to 50 years or more.

Are rubber flat roofs better than felt?

In most cases, rubber roofs are considered superior to traditional felt roofs due to the broad range of benefits they offer. EPDM and TPO are two of the most popular types of rubber roofing. Not only are they easy to install, but they’re also among the highest quality materials available for flat roofs. Contact our team of professionals if you’re interested in installing or replacing your flat roof. Learn more about flat roof replacement services by calling Legacy Service at +1 267-961-7088

legacyusa.com - Best Material For a Flat Roof - Flat Roof Materials & Installation Costs

What can I put on my shed roof instead of felt?

EPDM membranes are fast-becoming the roofing industry's go-to alternative to felt and other outdated roofing materials. The composition of EPDM as...

Last updated Apr 8, 2020

Why do shed floors rot?

Some shed buyers quickly discover their shed's flooring may not be as durable as they thought when they made the purchase. They ask "Why is my shed...

Last updated Nov 16, 2020