DIY Builds
Photo by Karolina Grabowska Pexels Logo Photo: Karolina Grabowska

What is the problem with spray foam insulation?

The poor application of spray foam insulation by an untrained or unlicensed contractor can lead to several problems, according to Fine Home Building. Poor application includes off-ratio spraying of the material, bad odors, and a lack of adhesion. A permanent odor can also be created when this happens.

retrofoamofmichigan.com - Spray Foam Insulation Problems: Look Out for These 7 Issues
How much does a concrete wheelchair ramp cost?
How much does a concrete wheelchair ramp cost?

$130 Per Foot Installed The cost of installing a handicap ramp is between from $90 – $175 per linear foot. Prices are based on the length and...

Read More »
Last updated Mar 1, 2021
Can you install solar panels on your own?
Can you install solar panels on your own?

Again, the answer is yes. If you can drive lag bolts and assemble prefabricated parts, and if you're willing to spend a day or two on your roof (or...

Read More »
Last updated Sep 25, 2018
Are shed plans easy to follow?
Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »
Promotion

Are you considering spray foam insulation for your home, but you have concerns about what could go wrong?

Spray foam insulation has been the material of choice for many builders and homeowners for nearly 30 years. Just like with any other product, as something becomes more popular, there will be an increase in misuse leading to spray foam insulation headaches. RetroFoam of Michigan has more than 17 years of experience insulating homes across the lower peninsula and greater Toledo area. We know a lot about injection and spray foam insulation because that is all we do. We’ve seen what can happen when an inexperienced contractor attempts to install spray foam insulation, and it isn’t pretty. From poor application to chemicals not mixing correctly, we have seen and fixed it all. In our ongoing efforts to educate our customers, we have compiled a list of seven things that can cause real problems when installing spray foam insulation and how to fix them.

Find answers to foam insulation FAQ in our learning center.

Spray Foam Insulation Problems

Misrepresentation of the Spray Foam Insulation Products Used

Since there are dozens of brands of spray foam insulation available, it is important to make sure you are getting what you want and what you paid for to avoid spray foam insulation problems. For example, the name Icynene-Lapolla has become a synonym for the term “spray foam insulation” with builders, architects, and homeowners alike since the company developed modern open cell spray foam in the 1980s. The problem arises when an imitation product is falsely represented so you have lack of adhesion to the cavity the foam is sprayed in and moisture management issues that can create mold and mildew, according to Icynene. Solution: The best way to solve this problem is to make sure that you are working with a licensed contractor that is providing you with the spray foam insulation material you agreed upon. Not all spray foam is created equal, so you need to understand what you are getting and review the tech and information sheets for the products they are using.

Your Expectations Don't Match Up

This comes down to miscommunication between the insulation contractor and the homeowner.

Energy efficiency and comfort are the biggest reason a homeowner adds spray foam to their home. If your expectations for both of these topics don't match up with what the contractor thinks will happen, then there are going to inevitably be issues. Solution: It's crucial that you and your spray foam insulation contractor are on the same page as to what the results will be as far as your goals are concerned.

You Haven't Done Research on Spray Foam Insulation

If you don't do your research before hiring a spray foam insulation contractor you may not understand what you're getting and you may not know what to look for in a contractor. Let's talk about that contractor first. When you hire a contractor, you expect them to be the expert in the field, so it should send up red flags if they aren't able to answer your questions about the material they plan to install.

Can I keep a tumble dryer in a shed?
Can I keep a tumble dryer in a shed?

In short, yes a tumble dry can be put in a shed, provided precautions are taken to keep them both safe. Before installing the tumble dryer, the...

Read More »
Last updated Mar 11, 2021
How high can a garden shed be UK?
How high can a garden shed be UK?

Garden sheds and outbuildings must be one story, and maximum eaves height cannot exceed 2.5 metres. Overall, your shed cannot exceed 4 metres in...

Read More »
Last updated Sep 22, 2019
These are the Best Shed Plans!
These are the Best Shed Plans!

Comprehensive and Intuitive to follow. Build That Shed!

Learn More »
Promotion

Solution: Educate yourself on your specific project so you can ensure that your contractor is experienced and on the same page as you. Only hire licensed contractors who have experience with the material you requested and have been trained by the spray foam insulation manufacturer.

Installers Try to Install the Product too Quickly and It's Installed Poorly

Being hasty and missing areas can lead to gaps in your insulation coverage which reduces the efficiency of the spray foam. Rushing the job can also lead to a contractor trying to apply a closed cell spray foam at too high a thickness. If the foam isn’t applied at the correct rate or thickness, the contractor will need to touch up spaces. The poor application of spray foam insulation by an untrained or unlicensed contractor can lead to several problems, according to Fine Home Building. Poor application includes off-ratio spraying of the material, bad odors, and a lack of adhesion. A permanent odor can also be created when this happens. The reason this occurs is that the chemicals in the spray foam get too hot and a permanent odor is created. This is due to the chemicals not having time to cool before more material was applied. Solution: Make sure that you have a reputable contractor that has experience installing the spray foam material you have chosen. Also ensure you know what the correct thickness of application should be because going into a project with knowledge is power. A good contractor will have something in writing between the two of you – like a lifetime warranty – stating if something goes wrong or a space was missed, then they will come back out and fix it. The Spray Foam Insulation Isn’t Installed at a Thickness that Creates an Air Seal Spray foam insulation will create an air seal that will keep your home warm in the winter and cool in the summer if it is applied correctly. If that air barrier isn’t created and air movement is allowed in your home, your AC unit and furnace will be working overtime as you attempt to keep your home comfortable. This will also lead to higher energy bills. Solution: Spray foam insulation has to be installed at a certain thickness before it creates an air barrier. For example, Icynene-Lapolla open cell spray foam must be installed at 3-inches before an air seal is created. Be sure to have that discussion with your licensed contractor and don’t be afraid to double-check the information before the project begins.

The Spray Foam Insulation Chemicals Weren’t Mixed Properly

What kind of math do carpenters use?
What kind of math do carpenters use?

Carpenters use arithmetic, algebra, geometry, calculus and statistics to measure materials, add up volumes and complete other project-planning...

Read More »
Last updated Nov 14, 2021
How can I make 2k a month from home?
How can I make 2k a month from home?

Fortunately, I've got some ideas to make that work easier. Here's how to make $2000 a month from home (or really, anywhere). ... Note: Most salary...

Read More »
Last updated Aug 6, 2021

If the chemicals in the spray foam aren’t mixed properly it can cause the insulation material to pull away from the cavity where it has been applied. When this happens, an air seal is not created, thus cool air will still be able to move around the insulation which will make your home uncomfortable. This can also lead to high energy bills as your appliances work overtime in an attempt to heat or cool your home. Solution: Make sure that the contractor you hire is licensed and has experience installing high-pressure spray foam insulation, along with the right equipment. Also, make sure the contractor offers a lifetime warranty with the product, so if anything goes wrong, they will come back out and fix it.

The Spray Foam has an Odor and Off-Gassing

All spray foams have an odor at the very least during the installation process.

The problem lies in how the contractor handles the odor.

Some odors only last for maybe an hour or two, while others can last much longer if the space to be insulated isn’t well ventilated. Another issue is potential off-gassing that can cause breathing problems or other adverse health effects, according to the Environmental Protection Agency. While all spray foams have an odor, not all have issues with off-gassing. Solution: A good contractor will ensure large air exchange units are placed in the area where the spray foam insulation is being installed.

This will help to dissipate the odor and any potential off-gassing.

Choosing Spray Foam Insulation for Your Home

RetroFoam of Michigan is an experienced, licensed, and insured contractor.

We also offer a lifetime warranty on both the products and workmanship of our foam insulation services. With all of this being said, we understand you have likely read a lot of spray foam horror stories and problems with spray foam insulation, so you may still have reservations about installing the material in your home. We have a ton of great resources in our Learning Center that might help ease some of those concerns you have. It's also a great place to learn even more about spray foam and all the benefits that come with it when you choose a superior product.

Related Articles

Which Insulation is the Best for My Existing House?

Insulation Contractor Vetting Checklist: What You Need to Look For Before Signing the Contract

Clearing Up Misconceptions About Spray Foam Insulation

retrofoamofmichigan.com - Spray Foam Insulation Problems: Look Out for These 7 Issues
What is the 28 day planning rule?
What is the 28 day planning rule?

One of the stand out changes to the planning system was the relaxation of permitted development rights relating to the temporary use of land. Prior...

Read More »
Last updated Mar 28, 2021
Do you need a Vapour barrier in a shed?
Do you need a Vapour barrier in a shed?

If you don't heat your shed or use air-conditioning then you don't need a vapour barrier. Otherwise, it'll just cause condensation and damp. If...

Read More »
Last updated Apr 28, 2021
Can I build my own shed?
Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »
Promotion
What is the most expensive part of building a house?
What is the most expensive part of building a house?

When it comes to the actual home construction, framing will be the most expensive part of the process. Based on the same $428K figure for the...

Read More »
Last updated Oct 14, 2018
Are shed plans easy to follow?
Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »
Promotion
Should you seal marine grade plywood?
Should you seal marine grade plywood?

Although Marine-Grade Plywood is strong, durable, and heavily-resistant to moisture, an additional coat of seal is typically needed to prevent...

Read More »
Last updated Mar 22, 2021