Photo: Erik Mclean

What is the regulation for a ramp?

The surface width of a ramp between walls, upstands or kerbs must be at least 1.5 metres. The surface of the ramp must be slip resistant and of a colour that contrasts visually with that of the landings. However, the frictional characteristics of the ramp and landing should be similar.

designingbuildings.co.uk - Ramps - Designing Buildings Wiki

Is bubble wrap being discontinued?

From 2021, the use of disposable plastic, including bubble wrap, will be banned. What will replace the bubbles? Jan 6, 2020

Last updated Jul 31, 2019

What kind of wire do I need to run to my shed?

Most shed owners need a couple of outlets and some lights to see what they're doing. Typically the most amps you'll need are a little over 15 to...

Last updated Jul 25, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Ramps

Ramps are sloped pathways used both inside and outside buildings used to provide access between vertical levels. Ramps provide an alternative to stairs for wheelchair users, people with mobility issues and people with prams, bicycles and other wheeled items. The gradient, slope or steepness of a ramp is the angular relationship between its rise (vertical height) and its horizontal projection or length (run), often expressed as a ratio. The rise may be set at a unit of one, so that, for example, a slope of 1:20 means that as each dimensional unit of height rises or falls, the dimensional unit of length runs out by 20 units. A ramp that has too steep a slope will prove difficult for people to use and could even be unsafe, whilst a ramp with too shallow a slope can require excessive length. There are a wide range of issues that must be considered in the design of ramps, including:

The appropriate steepness, length and width.

The distance between landings.

Surface materials.

Approach and access onto the ramp .

. The position of handrails and barriers.

Placement of door handles and the swing direction of doors.

Impact of a ramp on available space, existing trees, vegetation, and so on.

on available space, existing trees, vegetation, and so on. Cost.

Compliance with the building regulations.

The availability of alternative means of access.

The Workplace (Health, Safety and Welfare) Regulations 1992 Approved Code of Practice and guidance states: 'Regardless of their disability, people should be able to gain access to buildings and use the facilities. This could mean that an employer may need to make some changes to a building or premises to take account of the disabled person's needs.' Furthermore, the Equality Act 2010 requires that 'reasonable adjustments' are made when providing access to goods, facilities, services and premises. The buildings regulations Approved Document M (Access to and use of buildings) requires that 'reasonable provision shall be made for people to: a) gain access to; and b) use the building and its facilities.' It also states that 'where the gradient of the approach, whether over its whole length or in part, is 1:20 or steeper, that part of the approach should be designed as ramped access.' In all cases, it is recommended that stair access also be provided as ramps are not necessarily convenient for all people, even those with mobility issues. Where the total rise between levels is greater than 2 metres, an alternative means of access for wheelchair users should be made available, such as a lift. The gradient of a ramp and its going (horizontal distance) between landings must be in accordance with the following table:

Does aluminum foil keep mice away?

Mice hate the sound and smell of aluminum foil. They also can't grip onto it, despite generally being good climbers. If you want to use aluminum...

Last updated Dec 23, 2020

What is the best material to build a shed?

Made from either steel or galvanized aluminum, metal outdoor sheds provide durability at a very cost-effective price; although, metal is...

Last updated Mar 28, 2022

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Max. going of ramp Max. gradient Max. rise 10m 1:20 500mm 9m 1:19 473mm 8m 1:18 444mm 7m 1:17 411mm 6m 1:16 375mm 5m 1:15 333mm 4m 1:14 285mm 3m 1:13 230mm 2m 1:12 166mm

edit] External ramps

Approved Document M sets out the following requirements for external ramps:

Gradients should be as shallow as is practicable.

The surface should be firm and even.

Stairs should also be provided as adverse weather conditions can increase the risk of slipping on a ramp . . Landings should be at least 1.2 metres long at both the foot and head of the ramp . . Support in the form of handrails should be provided on both sides of the ramp .

. The approach to the ramp should be clearly marked.

should be clearly marked. Flights should have a going of less than 10 metres and a rise of less than 500 mm. The surface width of a ramp between walls, upstands or kerbs must be at least 1.5 metres. between walls, upstands or kerbs must be at least 1.5 metres. The surface of the ramp must be slip resistant and of a colour that contrasts visually with that of the landings. However, the frictional characteristics of the ramp and landing should be similar. must be slip resistant and of a colour that contrasts visually with that of the landings. However, the frictional characteristics of the and landing should be similar. Landings should be provided as passing places (at least 1800 mm wide x 1800 mm long) when it is not possible to see from one end of the ramp to the other, or where the ramp has 3 or more flights. to the other, or where the has 3 or more flights. All landings should be level, subject to a maximum gradient of 1:60 along the length, and a maximum cross-fall gradient of 1:40.

edit] Internal ramps

The design considerations for internal ramps are the same as those above for external ramps, excluding issues relating to the external environment. Steps should be provided as well as a ramp unless one of the following criteria can be fulfilled:

The ramp is sufficiently short.

is sufficiently short. The ramp has a shallow gradient.

has a shallow gradient. The rise is no more than the minimum that can be provided by two risers.

designingbuildings.co.uk - Ramps - Designing Buildings Wiki

How do you build a shed on an existing concrete slab?

How to Build a Shed on Pre Existing Concrete Step 1: Check Condition of the Slab. Is the slab structurally sound? ... Step 2: Plan Your Build. ......

Last updated Nov 11, 2018

How long can you camp on your own land UK?

You must have planning permission for the campsite before you apply for a licence. You do not need a licence to run a campsite if: the site is used...

Last updated Feb 7, 2022

Promotion

How do I make a no-till garden bed?

How to Create a No-Till Garden Spread A Layer of Compost. The first thing you want to do is spread a 2-inch layer of rotted manure or compost on...

Last updated Nov 20, 2021

Promotion

Does a deck or patio add more value?

Both a deck and a patio offer an impressive resale value. However, patios are usually less expensive to put in and their resale value sits at...

Last updated Apr 12, 2019