What is the wood between concrete called?

Trim-A-Slab is a replacement for rotted and old wood typically found between slabs in driveways and sidewalks. This wood was used during the slab construction, and is part of the 'formwork' used to define the size and shape of the slab.

trim-a-slab.com - How It Works - Trim-A-Slab

Can rats get into a metal shed?

Wooden sheds are easy prey for rats and mice but metal sheds are rodent proof because they are impossible to gnaw through. With a metal shed...

Last updated Apr 5, 2020

Can you put plants in garage for winter?

Many of the best plants for overwintering in a garage or basement have bulbous roots designed to store nutrients and moisture through a dormant...

Last updated Jul 28, 2018

Promotion

Trim-A-Slab is made from a rubber-like material that flexes and holds itself into the gap between concrete slabs. It is immune to rot, moves with slab expansion and contraction, and is not affected by moisture. It provides a redundant barrier to weed growth, and most importantly, does not trap dirt and debris like wood and other less flexible products. It will make your driveway easier to keep clean. Trim-A-Slab is a patented design (US 8,132,380), and is intended for slabs with radius (rounded) edges, and will fit and stay just below the surface without any special preparation. The exposed surface is slightly recessed, and is resistant to damage from foot and auto traffic. The clean, finished appearance is something your family and your neighbors will notice right away. You don’t have to take our word on it, our customer testimonials say it better than we can. It’s virtually maintenance free, and in case you need to run wires across your driveway for Christmas lights or an irrigation system, Trim-A-Slab can be removed and re-installed, no problem. Trim-A-Slab is available in six sizes, 3/16″, 3/8″, 1/2″, 3/4″, 1″, and 1-3/8″. Trim-A-Slab sizes follow THE GAP THAT YOU ARE FILLING. Trim-a-slab comes in black, cement grey, or walnut. Choose black for the lowest maintenance or an accented appearance. Choose grey to blend in. Walnut goes well in stamped or stained driveways. Please note, Walnut and Grey will show tire marks after a while, but they clean up easily with soap and water. All are guaranteed for up to 10 years for structural integrity, so whichever look you prefer, you can be sure it will last. Trim-A-Slab is available in pre-cut rolls, which weigh less than 20 pounds each, so if you do want to install yourself, it’s easy to handle. Visit the DIY installation page for all you need to know about installing Trim-A-Slab. If you aren’t the do-it-yourself type, visit the professional installation page for a list of installers, who will take care of the whole job for you.

How long do portable buildings last?

25 to 30 years With proper care, temporary modular buildings have a service life of at least 25 to 30 years, after which the components are...

Last updated Dec 8, 2019

What's the 50 30 20 budget rule?

Key Takeaways The rule states that you should spend up to 50% of your after-tax income on needs and obligations that you must-have or must-do. The...

Last updated Mar 14, 2018

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

How much does it cost to build a 12x16 storage shed?

A DIY build of a 12×16 shed can cost anywhere from $2,000 -$4,000 depending upon how many materials and tools you already have on hand. Also, the cost depends upon how intricate or simple of a shed design you choose.

durastorstructures.com - 12x16 Shed: Price, Siding Materials, Flooring & So Much More

For a list of materials for building a 12×16 shed, check out this article on How to Build a 12×16 Gable Shed.

Here are some of the tools needed:

Circular saw

Drill machinery and drill bits

Milter saw

6’ Ladder

Safety glasses

Hammer

Tape measurer

4’ level

Nail punch

Speed square

Extension ladder

2 sawhorses

If you do not already have most of the tools above, expect your overall shed cost to increase.

Time

Building a shed takes time especially if you want it done right. Expect to take at least a month or so of weekends to fully complete your 12×16 shed. Considering the amount of time that is required, you could calculate that in the overall cost of a DIY shed. Time is money. If you have plenty of time, then DIYing your shed will save you the cost of labor.

Labor

One of the main benefits of building a 12×16 shed by yourself would be saving on the cost of labor. The cost of labor contributes to the overall cost of a pre-built shed. However, if you are short on time and lack skilled carpentry experience, paying for another’s skilled labor will be worth it at the end of the day and 15 years down the road.