What pitch metal roof will shed snow?

Roof pitches of 3:12, 4:12, 5:12, or 6:12 work best for metal buildings in snow country. Anything over a 6:12 pitch tends to make massive amounts of snow slide off the roof without warning. Anything less than 1:12 pitch is a huge mistake in snow-prone climates.

rhinobldg.com - Designing Metal Roof Structures for Snow Country

How deep should a horse shelter be?

Shelter Size The height should be at least 10 feet to allow for a rearing horse, although for small ponies you could make it shorter. Standard...

Last updated Dec 18, 2020

What can you put on wood to make it stronger?

Using a wood hardener is one of the easiest and most effective ways to strengthen rotten wood. The chemical treatment penetrates deep into the...

Last updated Jan 25, 2021

Are shed plans easy to follow?

These are! They guide you every step of the way to complete your dream shed.

Learn More »

Promotion

Tips for Planning Steel Buildings for Extreme Winters

There are many considerations when planning metal buildings for snow country. Preparing for extreme snow and ice conditions begins with effective planning before your pre-engineered metal building is ordered.

Locating the building site

The first consideration is placement of the structure on your site.

Prevailing winds greatly affect snow buildup on and around a structure. The winds shift the snow, creating drifts on the roof of a building. Configuring a structure with the roof’s main ridgeline perpendicular to the prevailing winds causes snow to sweep across the windward side and pile deeply on the leeward side of the building. Snow distributed unevenly across a roof places greater stress on the structure. Building the structure with the ridgeway pointed toward the prevailing winds helps prevent the uneven accumulation of snow on the roof. Tall evergreen trees on the windward side of a building help create a windbreak. Windbreaks not only reduce the amount of snow accumulated on the roof, but also help block icy winds, helping to keep the structure warmer.

Keep the roofline simple

The most effective building design for snow country is a straight, single- ridge gable roof. Simple gable roofs shed snow and ice more quickly than complicated rooflines. Roofs with valleys, dormers, and other obstructions causes snow on metal roofs to building up erratically. The slope of the roof is also extremely important. Too shallow a slope causes snow on metal roofs to stay there longer, increasing the strain on the structure. Too high a slope may create a hazardous situation when great amounts of snow or ice slide off all at once. Sliding snow and ice actually wrecks more havoc— and results in more damage— than excessive snow piled on the roof. Snow can weigh 30 pounds-per-cubic-foot or more. If your roof has accumulated three feet of snow, that’s 90 pounds-per-square foot— or more. In the Sierra Nevada Mountains snow, loads are the most extreme in the U.S. The moisture coming in from the Pacific Ocean makes snow in this region extremely heavy. Locals call it “Sierra Cement.” In the Lake Tahoe area, for example, ground snow loads may reach 450 pounds-per-square foot!

Why are garage door prices so high?

Garage doors are one of many market segments experiencing extremely high demand due to homeowners' focus on home improvements during the pandemic....

Last updated Aug 19, 2018

Do you get more if you sell or pawn?

A pawn store will generally offer more money if you're selling your item instead of pawning it. However, it does depend on a few factors. For...

Last updated May 8, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Sliding snow often shears off chimneys, vents, and other roof obstructions. Massive snow suddenly sliding off a roof sometimes kills the unsuspecting caught below it. Roof pitches of 3:12, 4:12, 5:12, or 6:12 work best for metal buildings in snow country. Anything over a 6:12 pitch tends to make massive amounts of snow slide off the roof without warning. Anything less than 1:12 pitch is a huge mistake in snow-prone climates. Standing seam metal roofs— which allow snow to slide more easily— might do better with a 2:12 or 3:12 pitch. The ideal location for an entrance is on the endwall under the gable. Designing the entrance on the opposite end of the prevailing wind is preferable. Metal buildings usually do not have eave overhangs. In some locations, builders prefer overhangs to prevent snow on metal roofs from sliding off the roof and down the side of the building. However, unheated overhangs on a heated building increase the likelihood of damaging ice dams. Discuss the pros and cons of overhangs with your metal building supplier and with your local building department.

Gutters in snow country

Gutters and downspouts move water from melting snow and ice away from the structure. However, if the gutters are not properly maintained and cleaned, they can also block water’s exit. In poorly draining gutters, water refreezes as temperatures plummet, forming a backup that leads to ice dams. Some building owners resort to heat cables in gutters to avoid refreezing. Heavy sliding snow and ice sometimes rip gutters and downspouts from the structure. Discuss the winter weather in your location with your metal building supplier and your local building department for advice on including— or excluding— gutters and downspouts for your location.

Is Reclaimed barn wood expensive?

Reclaimed wood is much more expensive than buying new wood from a hardware store. Instead of paying a low price that makes it easy to pick up a...

Last updated Jun 30, 2019

Can you put a heat pump tumble dryer in the shed?

Overall, it's completely possible to install a tumble dryer inside a garden building such as a shed. Doing so can create extra space inside the...

Last updated Oct 14, 2019

Promotion

Insulating metal buildings for snow country

Buildings in snow country need adequate insulation to withstand tough winters. Because steel building walls are much deeper than wood-framed structures, metal buildings allow room for thicker, more energy efficient insulation.

Cover entrances to protect from the weather.

Place the majority of windows on the south-facing wall. Put as few windows on the north-facing walls as possible.

Avoid the use of skylights.

Chimneys are best located on the ridgeline for maximum support.

RHINO steel buildings in snow country

The metal buildings available from RHINO Steel Building Systems offer unparalleled benefits in snow country: RHINO steel buildings are guaranteed to meet or exceed all snow loads and building codes for which the building was designed— for the lifetime of the structure. RHINO’s Pro-Value ultra-thick insulation packages provide excellent energy efficiency for even the coldest climates. The Pro-Value Insulation is not just thicker insulation. It is an insulation system, including steel retaining straps, a durable fabric vapor barrier, a thermal break material, and thick fiberglass insulation up to R-38. Made of high-grade 26-gauge steel, RHINO’s gutters and downspouts are deeper throated to move water faster. Available in colors to match any building, these big gutters act as trim on the structures. Over 60% of RHINO customers choose to add gutters and downspouts to their steel building orders. (However, gutters and downspouts are not recommended in extreme snowfall areas.)

RHINO ships steel buildings all across North America, including Canada and Mexico.

Learn more about designing metal buildings for snow country by calling RHINO Steel Building Systems today at 940.383.9566.

rhinobldg.com - Designing Metal Roof Structures for Snow Country

Do rats bite humans?

Healthy rats typically avoid people and prefer to be active when buildings are quiet. However, when cornered, they will lunge and bite to defend...

Last updated Feb 3, 2019

Will a king-size mattress fit in a 5x10 storage unit?

A king-size bed set, including a box spring, can fit in a 5x10 storage unit. An average king-size bed takes up about 18 of the 50 square feet of...

Last updated Jun 17, 2020

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

What type of fence adds to property value?

Wood fences are most likely to increase a home's value, but they need regular sealing or staining to preserve their structural integrity. With...

Last updated Dec 27, 2019

Can I build my own shed?

Yes, with the right plans you can build your dream shed.

Learn More »

Promotion

Do bathroom sinks need to be vented?

Venting is necessary for bathroom plumbing systems to prevent blockage. All pipes in your home, particularly for toilets, sinks, and showers,...

Last updated Apr 7, 2022